biosseri.c

来自「开放源码的编译器open watcom 1.6.0版的源代码」· C语言 代码 · 共 148 行

/****************************************************************************
*
*                            Open Watcom Project
*
*    Portions Copyright (c) 1983-2002 Sybase, Inc. All Rights Reserved.
*
*  ========================================================================
*
*    This file contains Original Code and/or Modifications of Original
*    Code as defined in and that are subject to the Sybase Open Watcom
*    Public License version 1.0 (the 'License'). You may not use this file
*    except in compliance with the License. BY USING THIS FILE YOU AGREE TO
*    ALL TERMS AND CONDITIONS OF THE LICENSE. A copy of the License is
*    provided with the Original Code and Modifications, and is also
*    available at www.sybase.com/developer/opensource.
*
*    The Original Code and all software distributed under the License are
*    distributed on an 'AS IS' basis, WITHOUT WARRANTY OF ANY KIND, EITHER
*    EXPRESS OR IMPLIED, AND SYBASE AND ALL CONTRIBUTORS HEREBY DISCLAIM
*    ALL SUCH WARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF
*    MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR
*    NON-INFRINGEMENT. Please see the License for the specific language
*    governing rights and limitations under the License.
*
*  ========================================================================
*
* Description:  WHEN YOU FIGURE OUT WHAT THIS FILE DOES, PLEASE
*               DESCRIBE IT HERE!
*
****************************************************************************/


#include "variety.h"
#include <stddef.h>
#include <bios.h>
#include "necibm.h"
#include "nonibm.h"


/* DOS only, so no multithreading issues with static data */
static struct {
    unsigned char       pad[18];
    unsigned char       data;
    unsigned char       status;
} buf1, buf2, buf3;                     /* one for each com port */


_WCRTLINK unsigned short _bios_serialcom( unsigned cmd, unsigned port, unsigned data )
{
    struct com_t        necBuf;
    unsigned short      necRc, rc;
    unsigned short      buf = data;

    if( !__NonIBM ) {
        return( __ibm_bios_serialcom( cmd, port, data ) );
    } else {
        /*** Initialize the NEC98 com_t buffer ***/
        necBuf.baud = _NEC98_COM_DEFAULT_BAUD;
        necBuf.mode = _NEC98_COM_DEFAULT_MODE;
        necBuf.command = _NEC98_COM_DEFAULT_CMD;
        necBuf.tx_time = _NEC98_COM_DEFAULT_TIME;
        necBuf.rx_time = _NEC98_COM_DEFAULT_TIME;
        necBuf.size = 1;

        /*** Translate port numbers ***/
        switch( port ) {
          case _IBM_COM_CH1:
            port = _NEC98_COM_CH1;
            necBuf.buffer = &buf1;
            break;
          case _IBM_COM_CH2:
            port = _NEC98_COM_CH2;
            necBuf.buffer = &buf2;
            break;
          case _IBM_COM_CH3:
            port = _NEC98_COM_CH3;
            necBuf.buffer = &buf3;
            break;
          default:
            return( 0 );        // invalid port for NEC 98
        }

        /*** Translate IBM commands to NEC98 commands ***/
        switch( cmd ) {
          case _IBM_COM_SEND:
            necBuf.buffer = &buf;
            necRc = __nec98_bios_serialcom( _NEC98_COM_SEND, port, &necBuf );
            if( necRc == 0 ) {
                rc = buf & 0x00FF;
            } else {
                rc = 0x8000;                            // error: set bit 15
            }
            break;
          case _IBM_COM_RECEIVE:
            necBuf.buffer = &buf;
            necRc = __nec98_bios_serialcom( _NEC98_COM_RECEIVE, port, &necBuf );
            if( necRc == 0 ) {
                rc = buf & 0x00FF;
            } else {
                rc = 0;
                if( buf & 0x2000 )  rc |= 0x0800;       // framing error
                if( buf & 0x1000 )  rc |= 0x0200;       // overrun error
                if( buf & 0x0800 )  rc |= 0x0400;       // parity error
                if( buf & 0x0400 )  rc |= 0x2000;       // TXE
                if( rc == 0 )  rc |= 0x8000;            // assume timed out
            }
            break;
          case _IBM_COM_INIT:
            /*** Translate baud ***/
            if( (data & _IBM_COM_9600)  ==  _IBM_COM_9600 ) {
                necBuf.baud = _NEC98_COM_9600;
            } else if( (data & _IBM_COM_4800)  ==  _IBM_COM_4800 ) {
                necBuf.baud = _NEC98_COM_4800;
            } else if( (data & _IBM_COM_2400)  ==  _IBM_COM_2400 ) {
                necBuf.baud = _NEC98_COM_2400;
            } else if( (data & _IBM_COM_1200)  ==  _IBM_COM_1200 ) {
                necBuf.baud = _NEC98_COM_1200;
            } else if( (data & _IBM_COM_600)  ==  _IBM_COM_600 ) {
                necBuf.baud = _NEC98_COM_600;
            } else if( (data & _IBM_COM_300)  ==  _IBM_COM_300 ) {
                necBuf.baud = _NEC98_COM_300;
            } else if( (data & _IBM_COM_150)  ==  _IBM_COM_150 ) {
                necBuf.baud = _NEC98_COM_150;
            } else if( (data & _IBM_COM_110)  ==  _IBM_COM_110 ) {
                return( 0 );    // invalid baud for NEC 98
            } else {
                necBuf.baud = _NEC98_COM_DEFAULT_BAUD;
            }
            __nec98_bios_serialcom( _NEC98_COM_INIT, port, &necBuf );
            // fall through to _IBM_COM_STATUS get status bits
          case _IBM_COM_STATUS:
            necBuf.buffer = &buf;
            necRc = __nec98_bios_serialcom( _NEC98_COM_STATUS, port, &necBuf );
            rc = 0;
            if( buf & 0x0080 )  rc |= 0x0020;   // data set ready
            if( buf & 0x0040 )  rc |= 0x1000;   // break detected
            if( buf & 0x0020 )  rc |= 0x0800;   // framing error
            if( buf & 0x0010 )  rc |= 0x0200;   // overrun error
            if( buf & 0x0008 )  rc |= 0x0400;   // parity error
            if( buf & 0x0008 )  rc |= 0x0400;   // parity error
            break;
          default:
            return( 0 );        // invalid command for NEC 98
        }
        return( rc );
    }
}