english.lng

WinRAR密码破解器 WinRAR密码破解器 WinRAR密码破解器 WinRAR密码破解器

; AZPR language file
; ==================

; blank lines and lines starting from semicolons are ignored
;
; \r means carriage return
; \n means line feed
; However, do NOT add this formating characters if original string doesn't
; use them

;
; Special fields, they will be used later like %FIELD_NAME%
; 23/08/2000 Now these fields defined internally by program
;
;PROG_NAME=AZPR
;PROG_FULLNAME=Advanced ZIP Password Recovery
;PROG_VER=3.0
;ASAVE_FILE=~azpr.azr
;LOGFILE=azpr.log
;LANGFILE_VERSION=3.0
;PROG_EXTU=ZIP
;PROG_EXT=zip
;PROG_NAME_EXT=azr
;
; File information
; Your name (if you so wish) and your language name defined here
;
TRANSLATOR=Elcom Ltd.
LANGUAGE=English

;
; You can define national characters to use with dictionary-based attack:
; smart mutations & all possible upper/lowercase combinations
; First, define non-Latin capital letters
FOREIGNCAPS=
; and then define non-Latin small letters (in the same order
; as capitals!)
FOREIGNSMALL=
; if your language doesn't use non-Latin characters, (or characters
; can be only in upper or lowercase), leave these fields empty.

; New field added at January, 7, 2000
; This field used with dictionary-based attack/smart mutations to
; make word "elite", i.e. vowels in lower case, other letters in upper
; (for example, "password" becomes "PaSSWoRD")
; This field contains only vowels (which also defined in FOREIGNCAPS field)
FOREIGNVOWEL=

;----------------------------------------------------------------------------;
; AZPR messages                                                              ;
;----------------------------------------------------------------------------;

; Password range messages
10=Analysing password range...
11=Invalid minimal password length. It does not match the starting password. Minimal length has been adjusted.

; Starting password messages
12=Analysing starting password...
13=Starting from password
14=Last password:

; Password length messages
15=Password length =
16=passwords to do:

; Mask messages
17=Number of not-masked symbols =

; Dictionary messages
18=Starting dictionary attack...

; Registration messages
20=is now registered !
21=launched, registered version
22=launched, unregistered version, some features disabled
23=%PROG_NAME% version %PROG_VER% - Registered
24=%PROG_NAME% version %PROG_VER% - Not registered

; Autobackup messages
30=Performing autobackup...
31=Auto-save directory not defined. Using path:
32=Auto-save path is invalid
33=Please select an auto-save folder
34=Auto-save path selection cancelled. Auto-save now disabled
35=Auto-save path is invalid or is not selected. Disable auto-save ?
36=Auto-save file not defined. Using '%ASAVE_FILE%' file

; Interface messages
40=-  Untitled
41=Do you want to save your project before quitting ?
42=shutdown
43=Trying to open source file
44=File
45=successfully opened

; Project Messages
50=New project created

; Result messages
60=Password successfully recovered !
61=Encryption keys successfully recovered !
62=is a valid password for this file

; Button captions
70=Open
71=Save
72=Start !
73=Stop
74=Charset
75=Benchmark
76=Register
77=Help
78=About
79=Quit

; Button hints
80=Create a new project
81=Open project...
82=Save project
83=Start recovery
84=Stop recovery
85=Custom charset...
86=Do speed-test
87=Help contents
88=About %PROG_NAME%
89=Quit %PROG_NAME%

90=Register your copy of %PROG_NAME%

91=Load %PROG_EXTU%-file into the project...
92=Select dictionary file...
93=Select plain-text file...
94=Select auto-save directory...
95=Clear starting password
96=Clear mask
97=All latin + all digits + all special

98=Clear "start from" field
99=Search for password
100=Decrypt %PROG_EXTU% archive using these keys
101=Load encryption keys
102=Clear start line

; Interface captions
110=Encrypted %PROG_EXTU%-file
111=Dictionary options
112=Dictionary file path:
113=Password length options
114=Minimal password length =
115=Maximal password length =

116=Type of attack
117=Brute-force
118=Mask
119=Dictionary
120=Plain-text

121=Brute-force range options
122=All printable
123=Space
124=All special symbols (!@...)
125=All caps latin (A - Z)
126=All small latin (a - z)
127=All digits (0 - 9)
128=User-defined
129=Start from:
130=Mask:
131=Options
132=Minimize to tray
133=Enable logging to %LOGFILE%
134=Make backup before file changing
135=Prompt if project is changed
136=Mask symbol:
137=Auto-save
138=Save project every
139=minutes
140=Priority options
141=Background
142=High
143=Current password:
144=Status window
145=Progress indicator
146=character(s)
147=Smart mutations
148=Try all possible upper/lower case combinations
149=Auto-save file name:
150=Auto-save directory:
151=Average speed:
152=Time elapsed:
153=Time remaining:
154=Password length =
155=total:
156=processed:
157=Dictionary attack in progress, processed
158=password(s)
159=Progress bar update interval
160=ms
161=Start line #
162=Plain-text options
163=Plain-text file path:
164=Key0:
165=Key1:
166=Key2:

; Pagecontrol captions
170=Range
171=Length
172=Dictionary
173=Plain-text
174=Auto-save
175=Options

; Statistics messages
180=Total passwords
181=Total time
182=Average speed (passwords per second)
183=Password for this file
184=Password in HEX
185=Not found
186=%PROG_FULLNAME% statistics:
187=Copy password to the Clipboard
188=Copy HEX password to the Clipboard
189=Save...
190=Save password to file
191=OK
192=More than one year

193=n/a
194=Encryption keys
195=Copy encryption keys to the Clipboard
196=Save encryption keys to file

; User charset captions
200=User defined charset
201=Define your charset
202=Load charset...
203=Save charset...
204=Clear charset
205=Add charset from file...
206=OK
207=Cancel
208=Convert to OEM encoding

; About box captions
210=About
211=version %PROG_VER%
213=Open %PROG_NAME% WWW-page
214=Open Password Recovery Software WWW-page
215=Open Elcom Software WWW-page

; Plaintext progress messages
220=Plain-text attack is in progress,
221=reducing number of keys
222=searching for keys
223=trying to retrieve any password (up to 9 symbols long)
224=trying to retrieve printable password (up to 10 characters long)

230=%PROG_NAME% %PROG_VER%. Task finished.
231=%PROG_NAME%
232=Unregistered %PROG_NAME% can recover passwords up to %UNREG_MAX% characters long only
233=Archive successfully decrypted.
234=Archive decryption error.
235=Decryption keys are shown in registered version only.
236=The password has been found, but it's length exceeds evaluation version limitation.
237=Only first file from archive will be decrypted.

240=No matching files in selected archives. If you'd like to run plaintext\r\nattack using only part of the file, please modify the archives so\r\neach of them will contain one file only.
241=No matching files in selected archives. Would you like to run the\r\nplaintext attack using only part of the file?
242=Plain-text attack status cannot be saved.\r\nDo you really want to stop it?
243=Plain-text attack started

; Benchmark messages
250=Sorry, the benchmark is available for brute-force and brute-force\r\nwith mask attacks only.
251=Benchmarking ...
252=Passwords to process
253=Work time

;
; Error messages
;

; Brute-force
300=Invalid password range or range not defined
301=Invalid starting password, it does not match a selected range
302=Maximum length must be greater than minimum length
303=Password not found

; Dictionary
304=Error opening dictionary file
305=Start line exceeds dictionary size

; Common
310=Can not save to selected file
311=%PROG_NAME% Error
312=Terminated by user
313=Auto-save path is not selected
314=Invalid progress bar update interval
315=Can not open this project file

; Archive's open errors
320=Can not open %PROG_EXTU% archive
321=Selected file is not a %PROG_EXTU% archive
322=Archive corrupted or no encrypted files
323=Cashing error
324=Fatal exception

; Quit message
330=Quit

; Mask errors
340=Mask not set
341=No mask symbols found
342=Mask does not match a starting password
343=Mask symbol not defined

; Plaintext errors
350=Encryption keys not found
351=Selected archive contains encrypted files only.
352=Not enough data for plaintext attack.
353=Plaintext attack internal error.
354=Invalid value.

;---------------------------------------
; New message added at December, 14 1999

; Registration messages
360=Registration
361=Enter registration code:
362=Thank you for registering %PROG_NAME%!
363=The code you've entered is invalid!

; Dialog headers
370=Benchmark result

; Partial plain-text attack dialog
371=Attack using only part of the file
372=Enter size of plain-text:

; Error message used with different previously defined error messages
380=Error:

; When selecting language from options menu
390=Language:

; These message (maybe) will be used with plain-text & dictionary attack
; %d means a number inserted by program (as in C programming language)
400=cycle %d of %d
401=line %d of %d

; Open filters, | means delimiter
410=Charset files (*.chr)|*.chr|All files (*.*)|*.*
411=%PROG_NAME% status files (*.%PROG_NAME_EXT%)|*.%PROG_NAME_EXT%|All files (*.*)|*.*
412=%PROG_EXTU% files (*.%PROG_EXT%)|*.%PROG_EXT%|SFX-%PROG_EXTU% files (*.exe)|*.exe|All files (*.*)|*.*
413=Dictionary files (*.dic)|*.dic|Text files (*.txt)|*.txt|All files (*.*)|*.*
414=%PROG_EXTU% files (*.%PROG_EXT%)|*.%PROG_EXT%|All files (*.*)|*.*
415=Text files (*.txt)|*.txt|All files (*.*)|*.*

;--------------------------------------
; New messages added at January, 7 2000
; Command line messages
420=Incorrect command line
421=The file is not a password-protected %PROG_EXTU%-archive or status file

; Question after plaintext attack if we aren't got a password
430=The password not found. Do you want to decrypt archive now?

431=Mask length exceeds unregistered version limits

; When user drag'n'dropped several files:
432=%PROG_NAME% can accept only one file at once

;---------------------------------------
; New messages added at Januany, 17 2000
; (will be used in later versions)

; Plain-text with binary (not a archive) file (also used msgs 371-372)
440=Allow using binary file as a plain-text %PROG_EXTU% archive
441=Enter data offset

;---------------------------------------
; New messages added at March, 3 2000
;---------------------------------------
450=Update
451=Check for %PROG_NAME% updates in the Internet
452=The program is going to connect to Elcom web site to get information\r\nabout the most recent version of %PROG_NAME%. Nothing will be sent to Elcom\r\n(even your current version number). Make sure that you're online, and\r\npress "OK"; or "Cancel" to decline.
453=Please, wait
454=Connecting to Elcom web site...
455=Cannot retrieve current version info
456=WININET.DLL is not installed
457=Connection cancelled
458=Cannot connect to website
459=You have newest version of %PROG_NAME%
460=Update is available, newest version is %s.\r\nYou can download it from %s.

; New "About" dialog messages
470=Product News:
471=Frequently Asked Questions:
472=Password Recovery Software:
473=Send Feedback:
474=Elcom Home Page:

480=Help

; Advanced plaintext configuration dialog messages
; (This feature will be implemented in future versions of AZPR)
490=Invoke advanced plaintext configuration dialog
491=Advanced plaintext configuration
492=Encrypted file
493=Select encrypted file...
494=Plaintext file
495=Select plaintext file...
496=Binary data
497=Archive contents
498=Data size:
499=Data offset:
500=Link matching files in archives
501=Start from:
502=Clear 'start from' field
503='Start from' field contains invalid value.\r\nClear it and run the attack again.

; next line starts from lowercase letter 'cause it used (or will be used)
; in the middle of the phrase...
510=version

520=RSA key file not found
521=RSA key file corrupted
522=RSA key file invalid

; new for 3.50
530=Advanced
531=Advanced options
532=Use known start of the file for stored archives (hex)
533=Always use WinZIP optimized attack engine if probability is greater then
534=Known bytes:
535=This archive has been created with WinZIP with a probability of %d%%.\r\nDo you want to use WinZIP optimized attack engine?
536=The "known bytes" field is invalid. Please correct it and run the attack again\r\n(Bytes should follow one by one without empty fields, in a hex form).
; status window messages
537=Using known start of the file.
538=Using winzip optimized attack engine.

540=This archive has been created with %PROG_EXTU% version which is not supported by %PROG_NAME% (yet).
541=Testing dictionary

550=End at:
551=Clear ending password
552=Ending password length does not match maximum password length
553=Invalid ending password, it does not match a selected range
554=Mask does not match an ending password
555=Cannot run the attack.\r\nStarting password greater then or equal to ending password.
556=Attack stopped at password '%s'.
; End of message file