dsp_proj.mak

数码投影仪,包含电路,RS232通信,远程控制

# Generated by Code Composer Studio

# Makefile for C:\ti\myprojects\tms320vc547xbootloader_sds_022702\dsp_proj\dsp_proj.pjt
# This makefile is intended to be compatible with any version of make.
#
# USAGE
# Step 1: Set up proper environment variables, by running DosRun.bat
#         (Windows platform) or set them up by yourself.
# Step 2: Change directory to the directory of this makefile, which is stored
#         in the macro MAKEFILE_DIR
# Step 3: In the makefile directory, you can perform one of these operations:
#         To build the configuration <config>, type make <config>
#         To clean the configuration <config>, type make <config>clean
#         To rebuild the configuration <config>, type make <config>rebuild
#         If <config> is not specified, the operations apply to the active
#         configuration, which is stored in the macro ACTIVE_CONFIG.
#
# DETAILS
# Step 1:
#   In order for this makefile to work, you must have the environment variables
# set properly.  Specifically, the paths to build programs and the system-wide
# header files and library files must be set.
#   In Windows, a batch file "DosRun.bat", located at the root directory of
# the Code Composer Studio installation, is provided to set up these variables.
#   In UNIX, you can set up these environment variables yourself.  The "PATH"
# variable must include the paths to the build programs, and the "C_DIR" and
# "A_DIR" variables must include the paths to the system-wide header files and
# library files.
#
# Step 2:
#   System files referenced by this project are specified in full path names,
# while other files in this project are specified in path names relative to the
# directory of this makefile.  These directory names are stored in DIR_x macros.
# You can modify them to reflect the locations of the files on this system.
#   It is important that the command to make this makefile is issued from the
# directory of this makefile, which is stored in the macro MAKEFILE_DIR.
#
# Step 3:
#   There are three operations that can be performed on a build configuration:
# make, clean, and rebuild. A rebuild forces all files in the configuration to
# be rebuilt.
# To build the configuration <config>, type make <config>
# To clean the configuration <config>, type make <config>clean
# To rebuild the configuration <config>, type make <config>rebuild
#   If <config> is not specified, the operations apply to the active
# configuration. The active configuration can be any valid build configuration
# (including "all") and is specified in the macro ACTIVE_CONFIG.
# To build the active configuration, type make
# To clean the active configuration, type make clean
# To rebuild the active configuration, type make rebuild

# The MKFLAGS macro takes the place of the MFLAGS or MAKEFLAGS macro. If it
# gives you any trouble, just delete the macro. It is used when recursively
# calling make (i.e. when rebuilding)
MKFLAGS= $(MFLAGS)$(MAKEFLAGS)

MAKEFILE_DIR= C:/ti/myprojects/tms320vc547xbootloader_sds_022702/dsp_proj

# The active configuration can be one of these valid build configurations:
# all, Debug
ACTIVE_CONFIG= Debug

# These DIR_x macros store the directories of the files used in this project.
# There must be no trailing spaces after these macros.

DIR_1= Debug

DIR_2= C:/TI/C5400/CGTOOLS/BIN

DIR_3= C:/ti/c5400/cgtools/lib

SOURCE=$(DIR_3)/rts.lib
SOURCE=intvect.s54
SOURCE=main.c
SOURCE=dsp_proj.cmd

active_config: $(ACTIVE_CONFIG)

clean: $(ACTIVE_CONFIG)clean

rebuild: $(ACTIVE_CONFIG)rebuild

force_rebuild: 

all: Debug 

allclean: Debugclean 

allrebuild: Debugrebuild 


Debugclean: 
	-@rm -f $(DIR_1)/intvect.obj
	-@rm -f $(DIR_1)/main.obj
	-@rm -f dsp_proj.out

Debugrebuild: 
	$(MAKE) $(MFLAGS) -f dsp_proj.mak Debug FRC=force_rebuild

Debug: dsp_proj.out


dsp_proj.Debug.fbs: 
	../out2boot/out2boot dsp_proj ; \
	copy dsp_proj_code.h ../arm_boot ; \
	copy dsp_proj_data.h ../arm_boot

$(DIR_1)/intvect.obj: $(FRC) intvect.s54 
	"$(DIR_2)/cl500" -g -q -fr"C:/ti/myprojects/tms320vc547xbootloader_sds_022702/dsp_proj/Debug" -d"_DEBUG" "intvect.s54" 

$(DIR_1)/main.obj: $(FRC) main.c 
	"$(DIR_2)/cl500" -g -q -fr"C:/ti/myprojects/tms320vc547xbootloader_sds_022702/dsp_proj/Debug" -d"_DEBUG" "main.c" 

dsp_proj.out: $(FRC) $(DIR_3)/rts.lib $(DIR_1)/intvect.obj $(DIR_1)/main.obj dsp_proj.cmd 
	-@echo -z -q -c -o"./dsp_proj.out" -x> dsp_proj.Debug.lkf
	-@echo "$(DIR_3)/rts.lib">> dsp_proj.Debug.lkf
	-@echo "$(DIR_1)/intvect.obj">> dsp_proj.Debug.lkf
	-@echo "$(DIR_1)/main.obj">> dsp_proj.Debug.lkf
	-@echo "dsp_proj.cmd">> dsp_proj.Debug.lkf
	"$(DIR_2)/cl500" -@"dsp_proj.Debug.lkf"
	-@rm -f dsp_proj.Debug.lkf
	$(MAKE) $(MFLAGS) -f dsp_proj.mak dsp_proj.Debug.fbs