xstatus.h

来自「适合KS8695X」· C头文件 代码 · 共 348 行 · 第 1/2 页

/******************************************************************************
*
*     Author: Xilinx, Inc.
*
*
*     This program is free software; you can redistribute it and/or modify it
*     under the terms of the GNU General Public License as published by the
*     Free Software Foundation; either version 2 of the License, or (at your
*     option) any later version.
*
*
*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
*     FITNESS FOR A PARTICULAR PURPOSE.
*
*
*     Xilinx hardware products are not intended for use in life support
*     appliances, devices, or systems. Use in such applications is
*     expressly prohibited.
*
*
*     (c) Copyright 2002-2004 Xilinx Inc.
*     All rights reserved.
*
*
*     You should have received a copy of the GNU General Public License along
*     with this program; if not, write to the Free Software Foundation, Inc.,
*     675 Mass Ave, Cambridge, MA 02139, USA.
*
******************************************************************************/
/*****************************************************************************/
/**
*
* @file xstatus.h
*
* This file contains Xilinx software status codes.  Status codes have their
* own data type called XStatus.  These codes are used throughout the Xilinx
* device drivers.
*
******************************************************************************/

#ifndef XSTATUS_H		/* prevent circular inclusions */
#define XSTATUS_H		/* by using protection macros */

/***************************** Include Files *********************************/

#include "xbasic_types.h"

/************************** Constant Definitions *****************************/

/*********************** Common statuses 0 - 500 *****************************/

#define XST_SUCCESS                     0L
#define XST_FAILURE                     1L
#define XST_DEVICE_NOT_FOUND            2L
#define XST_DEVICE_BLOCK_NOT_FOUND      3L
#define XST_INVALID_VERSION             4L
#define XST_DEVICE_IS_STARTED           5L
#define XST_DEVICE_IS_STOPPED           6L
#define XST_FIFO_ERROR                  7L	/* an error occurred during an
						   operation with a FIFO such as
						   an underrun or overrun, this
						   error requires the device to
						   be reset */
#define XST_RESET_ERROR                 8L	/* an error occurred which requires
						   the device to be reset */
#define XST_DMA_ERROR                   9L	/* a DMA error occurred, this error
						   typically requires the device
						   using the DMA to be reset */
#define XST_NOT_POLLED                  10L	/* the device is not configured for
						   polled mode operation */
#define XST_FIFO_NO_ROOM                11L	/* a FIFO did not have room to put
						   the specified data into */
#define XST_BUFFER_TOO_SMALL            12L	/* the buffer is not large enough
						   to hold the expected data */
#define XST_NO_DATA                     13L	/* there was no data available */
#define XST_REGISTER_ERROR              14L	/* a register did not contain the
						   expected value */
#define XST_INVALID_PARAM               15L	/* an invalid parameter was passed
						   into the function */
#define XST_NOT_SGDMA                   16L	/* the device is not configured for
						   scatter-gather DMA operation */
#define XST_LOOPBACK_ERROR              17L	/* a loopback test failed */
#define XST_NO_CALLBACK                 18L	/* a callback has not yet been
						 * registered */
#define XST_NO_FEATURE                  19L	/* device is not configured with
						 * the requested feature */
#define XST_NOT_INTERRUPT               20L	/* device is not configured for
						 * interrupt mode operation */
#define XST_DEVICE_BUSY                 21L	/* device is busy */
#define XST_ERROR_COUNT_MAX             22L	/* the error counters of a device
						 * have maxed out */
#define XST_IS_STARTED                  23L	/* used when part of device is
						 * already started i.e.
						 * sub channel */
#define XST_IS_STOPPED                  24L	/* used when part of device is
						 * already stopped i.e.
						 * sub channel */

/***************** Utility Component statuses 401 - 500  *********************/

#define XST_MEMTEST_FAILED              401L	/* memory test failed */

/***************** Common Components statuses 501 - 1000 *********************/

/********************* Packet Fifo statuses 501 - 510 ************************/

#define XST_PFIFO_LACK_OF_DATA          501L	/* not enough data in FIFO   */
#define XST_PFIFO_NO_ROOM               502L	/* not enough room in FIFO   */
#define XST_PFIFO_BAD_REG_VALUE         503L	/* self test, a register value
						   was invalid after reset */

/************************** DMA statuses 511 - 530 ***************************/

#define XST_DMA_TRANSFER_ERROR          511L	/* self test, DMA transfer
						   failed */
#define XST_DMA_RESET_REGISTER_ERROR    512L	/* self test, a register value
						   was invalid after reset */
#define XST_DMA_SG_LIST_EMPTY           513L	/* scatter gather list contains
						   no buffer descriptors ready
						   to be processed */
#define XST_DMA_SG_IS_STARTED           514L	/* scatter gather not stopped */
#define XST_DMA_SG_IS_STOPPED           515L	/* scatter gather not running */
#define XST_DMA_SG_LIST_FULL            517L	/* all the buffer desciptors of
						   the scatter gather list are
						   being used */
#define XST_DMA_SG_BD_LOCKED            518L	/* the scatter gather buffer
						   descriptor which is to be
						   copied over in the scatter
						   list is locked */
#define XST_DMA_SG_NOTHING_TO_COMMIT    519L	/* no buffer descriptors have been
						   put into the scatter gather
						   list to be commited */
#define XST_DMA_SG_COUNT_EXCEEDED       521L	/* the packet count threshold
						   specified was larger than the
						   total # of buffer descriptors
						   in the scatter gather list */
#define XST_DMA_SG_LIST_EXISTS          522L	/* the scatter gather list has
						   already been created */
#define XST_DMA_SG_NO_LIST              523L	/* no scatter gather list has
						   been created */
#define XST_DMA_SG_BD_NOT_COMMITTED     524L	/* the buffer descriptor which was
						   being started was not committed
						   to the list */
#define XST_DMA_SG_NO_DATA              525L	/* the buffer descriptor to start
						   has already been used by the
						   hardware so it can't be reused
						 */

/************************** IPIF statuses 531 - 550 ***************************/

#define XST_IPIF_REG_WIDTH_ERROR        531L	/* an invalid register width
						   was passed into the function */
#define XST_IPIF_RESET_REGISTER_ERROR   532L	/* the value of a register at
						   reset was not valid */
#define XST_IPIF_DEVICE_STATUS_ERROR    533L	/* a write to the device interrupt
						   status register did not read
						   back correctly */
#define XST_IPIF_DEVICE_ACK_ERROR       534L	/* the device interrupt status
						   register did not reset when
						   acked */
#define XST_IPIF_DEVICE_ENABLE_ERROR    535L	/* the device interrupt enable
						   register was not updated when
						   other registers changed */
#define XST_IPIF_IP_STATUS_ERROR        536L	/* a write to the IP interrupt
						   status register did not read