xdma_channel.c

来自「适合KS8695X」· C语言 代码 · 共 739 行 · 第 1/2 页

* InstancePtr contains a pointer to the DMA channel to operate on.
*
* Control contains the value to be written to the control register of the DMA
* channel. One or more of the following values may be contained the register.
* Each of the values are unique bit masks such that they may be ORed together
* to enable multiple bits or inverted and ANDed to disable multiple bits.
*
*	XDC_DMACR_SOURCE_INCR_MASK	Increment the source address
*	XDC_DMACR_DEST_INCR_MASK	Increment the destination address
*	XDC_DMACR_SOURCE_LOCAL_MASK Local source address
*	XDC_DMACR_DEST_LOCAL_MASK	Local destination address
*	XDC_DMACR_SG_ENABLE_MASK	Scatter gather enable
*	XDC_DMACR_GEN_BD_INTR_MASK	Individual buffer descriptor interrupt
*	XDC_DMACR_LAST_BD_MASK		Last buffer descriptor in a packet
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_SetControl(XDmaChannel * InstancePtr, u32 Control)
{
	/* assert to verify input arguments except the control which can't be
	 * asserted since all values are valid
	 */
	XASSERT_VOID(InstancePtr != NULL);
	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* set the DMA control register to the specified value */

	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DMAC_REG_OFFSET, Control);
}

/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetStatus
*
* DESCRIPTION:
*
* This function gets the status register contents of the DMA channel.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The status register contents of the DMA channel. One or more of the
* following values may be contained the register. Each of the values are
* unique bit masks.
*
*	XDC_DMASR_BUSY_MASK			The DMA channel is busy
*	XDC_DMASR_BUS_ERROR_MASK	A bus error occurred
*	XDC_DMASR_BUS_TIMEOUT_MASK	A bus timeout occurred
*	XDC_DMASR_LAST_BD_MASK		The last buffer descriptor of a packet
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetStatus(XDmaChannel * InstancePtr)
{
	/* assert to verify input arguments */

	XASSERT_NONVOID(InstancePtr != NULL);
	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* return the contents of the DMA status register */

	return XIo_In32(InstancePtr->RegBaseAddress + XDC_DMAS_REG_OFFSET);
}

/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_SetIntrStatus
*
* DESCRIPTION:
*
* This function sets the interrupt status register of the specified DMA channel.
* Setting any bit of the interrupt status register will clear the bit to
* indicate the interrupt processing has been completed. The definitions of each
* bit in the register match the definition of the bits in the interrupt enable
* register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* Status contains the value to be written to the status register of the DMA
* channel.  One or more of the following values may be contained the register.
* Each of the values are unique bit masks such that they may be ORed together
* to enable multiple bits or inverted and ANDed to disable multiple bits.
*
*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
*	XDC_IXR_BD_MASK				A buffer descriptor is done
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_SetIntrStatus(XDmaChannel * InstancePtr, u32 Status)
{
	/* assert to verify input arguments except the status which can't be
	 * asserted since all values are valid
	 */
	XASSERT_VOID(InstancePtr != NULL);
	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* set the interrupt status register with the specified value such that
	 * all bits which are set in the register are cleared effectively clearing
	 * any active interrupts
	 */
	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET, Status);
}

/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetIntrStatus
*
* DESCRIPTION:
*
* This function gets the interrupt status register of the specified DMA channel.
* The interrupt status register indicates which interrupts are active
* for the DMA channel.  If an interrupt is active, the status register must be
* set (written) with the bit set for each interrupt which has been processed
* in order to clear the interrupts.  The definitions of each bit in the register
* match the definition of the bits in the interrupt enable register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The interrupt status register contents of the specified DMA channel.
* One or more of the following values may be contained the register.
* Each of the values are unique bit masks.
*
*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
*	XDC_IXR_SG_END_MASK			Current descriptor was the end of the list
*	XDC_IXR_BD_MASK				A buffer descriptor is done
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetIntrStatus(XDmaChannel * InstancePtr)
{
	/* assert to verify input arguments */

	XASSERT_NONVOID(InstancePtr != NULL);
	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* return the contents of the interrupt status register */

	return XIo_In32(InstancePtr->RegBaseAddress + XDC_IS_REG_OFFSET);
}

/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_SetIntrEnable
*
* DESCRIPTION:
*
* This function sets the interrupt enable register of the specified DMA
* channel.  The interrupt enable register contains bits which enable
* individual interrupts for the DMA channel.  The definitions of each bit
* in the register match the definition of the bits in the interrupt status
* register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* Enable contains the interrupt enable register contents to be written
* in the DMA channel. One or more of the following values may be contained
* the register. Each of the values are unique bit masks such that they may be
* ORed together to enable multiple bits or inverted and ANDed to disable
* multiple bits.
*
*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
*	XDC_IXR_SG_END_MASK			Current descriptor was the end of the list
*	XDC_IXR_BD_MASK				A buffer descriptor is done
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* None.
*
******************************************************************************/
void
XDmaChannel_SetIntrEnable(XDmaChannel * InstancePtr, u32 Enable)
{
	/* assert to verify input arguments except the enable which can't be
	 * asserted since all values are valid
	 */
	XASSERT_VOID(InstancePtr != NULL);
	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* set the interrupt enable register to the specified value */

	XIo_Out32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET, Enable);
}

/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_GetIntrEnable
*
* DESCRIPTION:
*
* This function gets the interrupt enable of the DMA channel.  The
* interrupt enable contains flags which enable individual interrupts for the
* DMA channel. The definitions of each bit in the register match the definition
* of the bits in the interrupt status register.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* RETURN VALUE:
*
* The interrupt enable of the DMA channel.  One or more of the following values
* may be contained the register. Each of the values are unique bit masks.
*
*	XDC_IXR_DMA_DONE_MASK		The dma operation is done
*	XDC_IXR_DMA_ERROR_MASK	    The dma operation had an error
*	XDC_IXR_PKT_DONE_MASK	    A packet is complete
*	XDC_IXR_PKT_THRESHOLD_MASK 	The packet count threshold reached
*	XDC_IXR_PKT_WAIT_BOUND_MASK The packet wait bound reached
*	XDC_IXR_SG_DISABLE_ACK_MASK The scatter gather disable completed
*	XDC_IXR_BD_MASK				A buffer descriptor is done
*
* NOTES:
*
* None.
*
******************************************************************************/
u32
XDmaChannel_GetIntrEnable(XDmaChannel * InstancePtr)
{
	/* assert to verify input arguments */

	XASSERT_NONVOID(InstancePtr != NULL);
	XASSERT_NONVOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* return the contents of the interrupt enable register */

	return XIo_In32(InstancePtr->RegBaseAddress + XDC_IE_REG_OFFSET);
}

/******************************************************************************
*
* FUNCTION:
*
* XDmaChannel_Transfer
*
* DESCRIPTION:
*
* This function starts the DMA channel transferring data from a memory source
* to a memory destination. This function only starts the operation and returns
* before the operation may be complete.  If the interrupt is enabled, an
* interrupt will be generated when the operation is complete, otherwise it is
* necessary to poll the channel status to determine when it's complete.  It is
* the responsibility of the caller to determine when the operation is complete
* by handling the generated interrupt or polling the status.  It is also the
* responsibility of the caller to ensure that the DMA channel is not busy with
* another transfer before calling this function.
*
* ARGUMENTS:
*
* InstancePtr contains a pointer to the DMA channel to operate on.
*
* SourcePtr contains a pointer to the source memory where the data is to
* be tranferred from and must be 32 bit aligned.
*
* DestinationPtr contains a pointer to the destination memory where the data
* is to be transferred and must be 32 bit aligned.
*
* ByteCount contains the number of bytes to transfer during the DMA operation.
*
* RETURN VALUE:
*
* None.
*
* NOTES:
*
* The DMA h/w will not currently allow a non-local memory transfer to non-local
* memory (memory copy), but only allows a non-local memory to or from the device
* memory (typically a FIFO).
*
* It is the responsibility of the caller to ensure that the cache is
* flushed and invalidated both before and after the DMA operation completes
* if the memory pointed to is cached. The caller must also ensure that the
* pointers contain a physical address rather than a virtual address
* if address translation is being used.
*
******************************************************************************/
void
XDmaChannel_Transfer(XDmaChannel * InstancePtr,
		     u32 * SourcePtr, u32 * DestinationPtr, u32 ByteCount)
{
	/* assert to verify input arguments and the alignment of any arguments
	 * which have expected alignments
	 */
	XASSERT_VOID(InstancePtr != NULL);
	XASSERT_VOID(SourcePtr != NULL);
	XASSERT_VOID(((u32) SourcePtr & 3) == 0);
	XASSERT_VOID(DestinationPtr != NULL);
	XASSERT_VOID(((u32) DestinationPtr & 3) == 0);
	XASSERT_VOID(ByteCount != 0);
	XASSERT_VOID(InstancePtr->IsReady == XCOMPONENT_IS_READY);

	/* setup the source and destination address registers for the transfer */

	XIo_Out32(InstancePtr->RegBaseAddress + XDC_SA_REG_OFFSET,
		  (u32) SourcePtr);

	XIo_Out32(InstancePtr->RegBaseAddress + XDC_DA_REG_OFFSET,
		  (u32) DestinationPtr);

	/* start the DMA transfer to copy from the source buffer to the
	 * destination buffer by writing the length to the length register
	 */
	XIo_Out32(InstancePtr->RegBaseAddress + XDC_LEN_REG_OFFSET, ByteCount);
}