pci.c
来自「适合KS8695X」· C语言 代码 · 共 962 行 · 第 1/3 页
C
962 行
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/* PCI.c - PCI functions */
#include <common.h>
#ifdef CONFIG_PCI
#include <pci.h>
#ifdef CONFIG_PCI_PNP
void pciauto_config_init(struct pci_controller *hose);
int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
#endif
#include "../../Marvell/include/pci.h"
#undef DEBUG
#undef IDE_SET_NATIVE_MODE
static unsigned int local_buses[] = { 0, 0 };
static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
};
#ifdef DEBUG
static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
static void gt_pci_bus_mode_display (PCI_HOST host)
{
unsigned int mode;
mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
switch (mode) {
case 0:
printf ("PCI %d bus mode: Conventional PCI\n", host);
break;
case 1:
printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
break;
case 2:
printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
break;
case 3:
printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
break;
default:
printf ("Unknown BUS %d\n", mode);
}
}
#endif
static const unsigned int pci_p2p_configuration_reg[] = {
PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
};
static const unsigned int pci_configuration_address[] = {
PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
};
static const unsigned int pci_configuration_data[] = {
PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
};
static const unsigned int pci_error_cause_reg[] = {
PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
};
static const unsigned int pci_arbiter_control[] = {
PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
};
static const unsigned int pci_address_space_en[] = {
PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
};
static const unsigned int pci_snoop_control_base_0_low[] = {
PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
};
static const unsigned int pci_snoop_control_top_0[] = {
PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
};
static const unsigned int pci_access_control_base_0_low[] = {
PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
};
static const unsigned int pci_access_control_top_0[] = {
PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
};
static const unsigned int pci_scs_bank_size[2][4] = {
{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
};
static const unsigned int pci_p2p_configuration[] = {
PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
};
/********************************************************************
* pciWriteConfigReg - Write to a PCI configuration register
* - Make sure the GT is configured as a master before writing
* to another device on the PCI.
* - The function takes care of Big/Little endian conversion.
*
*
* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec
* (or any other PCI device spec)
* pciDevNum: The device number needs to be addressed.
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|00|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
unsigned int pciDevNum, unsigned int data)
{
volatile unsigned int DataForAddrReg;
unsigned int functionNum;
unsigned int busNum = 0;
unsigned int addr;
if (pciDevNum > 32) /* illegal device Number */
return;
if (pciDevNum == SELF) { /* configure our configuration space. */
pciDevNum =
(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
0x1f;
busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
0xff0000;
}
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xfc;
DataForAddrReg =
(regOffset | pciDevNum | functionNum | busNum) | BIT31;
GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
GT_REG_READ (pci_configuration_address[host], &addr);
if (addr != DataForAddrReg)
return;
GT_REG_WRITE (pci_configuration_data[host], data);
}
/********************************************************************
* pciReadConfigReg - Read from a PCI0 configuration register
* - Make sure the GT is configured as a master before reading
* from another device on the PCI.
* - The function takes care of Big/Little endian conversion.
* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
* spec)
* pciDevNum: The device number needs to be addressed.
* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
* cause register to make sure the data is valid
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|00|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
unsigned int pciDevNum)
{
volatile unsigned int DataForAddrReg;
unsigned int data;
unsigned int functionNum;
unsigned int busNum = 0;
if (pciDevNum > 32) /* illegal device Number */
return 0xffffffff;
if (pciDevNum == SELF) { /* configure our configuration space. */
pciDevNum =
(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
0x1f;
busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
0xff0000;
}
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xfc;
DataForAddrReg =
(regOffset | pciDevNum | functionNum | busNum) | BIT31;
GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
GT_REG_READ (pci_configuration_address[host], &data);
if (data != DataForAddrReg)
return 0xffffffff;
GT_REG_READ (pci_configuration_data[host], &data);
return data;
}
/********************************************************************
* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
* the agent is placed on another Bus. For more
* information read P2P in the PCI spec.
*
* Inputs: unsigned int regOffset - The register offset as it apears in the
* GT spec (or any other PCI device spec).
* unsigned int pciDevNum - The device number needs to be addressed.
* unsigned int busNum - On which bus does the Target agent connect
* to.
* unsigned int data - data to be written.
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|01|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
* The configuration Address is configure as type-I (bits[1:0] = '01') due to
* PCI spec referring to P2P.
*
*********************************************************************/
void pciOverBridgeWriteConfigReg (PCI_HOST host,
unsigned int regOffset,
unsigned int pciDevNum,
unsigned int busNum, unsigned int data)
{
unsigned int DataForReg;
unsigned int functionNum;
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xff;
busNum = busNum << 16;
if (pciDevNum == SELF) { /* This board */
DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
} else {
DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
BIT31 | BIT0;
}
GT_REG_WRITE (pci_configuration_address[host], DataForReg);
GT_REG_WRITE (pci_configuration_data[host], data);
}
/********************************************************************
* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where
* the agent target locate on another PCI bus.
* - Make sure the GT is configured as a master
* before reading from another device on the PCI.
* - The function takes care of Big/Little endian
* conversion.
* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
* spec). (configuration register offset.)
* pciDevNum: The device number needs to be addressed.
* busNum: the Bus number where the agent is place.
* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
* cause register to make sure the data is valid
*
* Configuration Address 0xCF8:
*
* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
* |congif|Reserved| Bus |Device|Function|Register|01|
* |Enable| |Number|Number| Number | Number | | <=field Name
*
*********************************************************************/
unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
unsigned int regOffset,
unsigned int pciDevNum,
unsigned int busNum)
{
unsigned int DataForReg;
unsigned int data;
unsigned int functionNum;
functionNum = regOffset & 0x00000700;
pciDevNum = pciDevNum << 11;
regOffset = regOffset & 0xff;
busNum = busNum << 16;
if (pciDevNum == SELF) { /* This board */
DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
} else { /* agent on another bus */
DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
BIT0 | BIT31;
}
GT_REG_WRITE (pci_configuration_address[host], DataForReg);
GT_REG_READ (pci_configuration_data[host], &data);
return data;
}
/********************************************************************
* pciGetRegOffset - Gets the register offset for this region config.
*
* INPUT: Bus, Region - The bus and region we ask for its base address.
* OUTPUT: N/A
* RETURNS: PCI register base address
*********************************************************************/
static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
{
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?