📄 usb_ohci.c
字号:
/*
* URB OHCI HCD (Host Controller Driver) for USB on the S3C2400.
*
* (C) Copyright 2003
* Gary Jennejohn, DENX Software Engineering <gj@denx.de>
*
* Note: Much of this code has been derived from Linux 2.4
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* IMPORTANT NOTES
* 1 - you MUST define LITTLEENDIAN in the configuration file for the
* board or this driver will NOT work!
* 2 - this driver is intended for use with USB Mass Storage Devices
* (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
*/
#include <common.h>
/* #include <pci.h> no PCI on the S3C24X0 */
#ifdef CONFIG_USB_OHCI
#if defined(CONFIG_S3C2400)
#include <s3c2400.h>
#elif defined(CONFIG_S3C2410)
#include <s3c2410.h>
#endif
#include <malloc.h>
#include <usb.h>
#include "usb_ohci.h"
#define OHCI_USE_NPS /* force NoPowerSwitching mode */
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
#define OHCI_CONTROL_INIT \
(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
#define readl(a) (*((vu_long *)(a)))
#define writel(a, b) (*((vu_long *)(b)) = ((vu_long)a))
#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
#undef DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
#else
#define dbg(format, arg...) do {} while(0)
#endif /* DEBUG */
#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
#undef SHOW_INFO
#ifdef SHOW_INFO
#define info(format, arg...) printf("INFO: " format "\n", ## arg)
#else
#define info(format, arg...) do {} while(0)
#endif
#define m16_swap(x) swap_16(x)
#define m32_swap(x) swap_32(x)
/* global ohci_t */
static ohci_t gohci;
/* this must be aligned to a 256 byte boundary */
struct ohci_hcca ghcca[1];
/* a pointer to the aligned storage */
struct ohci_hcca *phcca;
/* this allocates EDs for all possible endpoints */
struct ohci_device ohci_dev;
/* urb_priv */
urb_priv_t urb_priv;
/* RHSC flag */
int got_rhsc;
/* device which was disconnected */
struct usb_device *devgone;
/* flag guarding URB transation */
int urb_finished = 0;
/*-------------------------------------------------------------------------*/
/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
* The erratum (#4) description is incorrect. AMD's workaround waits
* till some bits (mostly reserved) are clear; ok for all revs.
*/
#define OHCI_QUIRK_AMD756 0xabcd
#define read_roothub(hc, register, mask) ({ \
u32 temp = readl (&hc->regs->roothub.register); \
if (hc->flags & OHCI_QUIRK_AMD756) \
while (temp & mask) \
temp = readl (&hc->regs->roothub.register); \
temp; })
static u32 roothub_a (struct ohci *hc)
{ return read_roothub (hc, a, 0xfc0fe000); }
static inline u32 roothub_b (struct ohci *hc)
{ return readl (&hc->regs->roothub.b); }
static inline u32 roothub_status (struct ohci *hc)
{ return readl (&hc->regs->roothub.status); }
static u32 roothub_portstatus (struct ohci *hc, int i)
{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
/* forward declaration */
static int hc_interrupt (void);
static void
td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
/*-------------------------------------------------------------------------*
* URB support functions
*-------------------------------------------------------------------------*/
/* free HCD-private data associated with this URB */
static void urb_free_priv (urb_priv_t * urb)
{
int i;
int last;
struct td * td;
last = urb->length - 1;
if (last >= 0) {
for (i = 0; i <= last; i++) {
td = urb->td[i];
if (td) {
td->usb_dev = NULL;
urb->td[i] = NULL;
}
}
}
}
/*-------------------------------------------------------------------------*/
#ifdef DEBUG
static int sohci_get_current_frame_number (struct usb_device * dev);
/* debug| print the main components of an URB
* small: 0) header + data packets 1) just header */
static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
int transfer_len, struct devrequest * setup, char * str, int small)
{
urb_priv_t * purb = &urb_priv;
dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
str,
sohci_get_current_frame_number (dev),
usb_pipedevice (pipe),
usb_pipeendpoint (pipe),
usb_pipeout (pipe)? 'O': 'I',
usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
(usb_pipecontrol (pipe)? "CTRL": "BULK"),
purb->actual_length,
transfer_len, dev->status);
#ifdef OHCI_VERBOSE_DEBUG
if (!small) {
int i, len;
if (usb_pipecontrol (pipe)) {
printf (__FILE__ ": cmd(8):");
for (i = 0; i < 8 ; i++)
printf (" %02x", ((__u8 *) setup) [i]);
printf ("\n");
}
if (transfer_len > 0 && buffer) {
printf (__FILE__ ": data(%d/%d):",
purb->actual_length,
transfer_len);
len = usb_pipeout (pipe)?
transfer_len: purb->actual_length;
for (i = 0; i < 16 && i < len; i++)
printf (" %02x", ((__u8 *) buffer) [i]);
printf ("%s\n", i < len? "...": "");
}
}
#endif
}
/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
void ep_print_int_eds (ohci_t *ohci, char * str) {
int i, j;
__u32 * ed_p;
for (i= 0; i < 32; i++) {
j = 5;
ed_p = &(ohci->hcca->int_table [i]);
if (*ed_p == 0)
continue;
printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
while (*ed_p != 0 && j--) {
ed_t *ed = (ed_t *)m32_swap(ed_p);
printf (" ed: %4x;", ed->hwINFO);
ed_p = &ed->hwNextED;
}
printf ("\n");
}
}
static void ohci_dump_intr_mask (char *label, __u32 mask)
{
dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
label,
mask,
(mask & OHCI_INTR_MIE) ? " MIE" : "",
(mask & OHCI_INTR_OC) ? " OC" : "",
(mask & OHCI_INTR_RHSC) ? " RHSC" : "",
(mask & OHCI_INTR_FNO) ? " FNO" : "",
(mask & OHCI_INTR_UE) ? " UE" : "",
(mask & OHCI_INTR_RD) ? " RD" : "",
(mask & OHCI_INTR_SF) ? " SF" : "",
(mask & OHCI_INTR_WDH) ? " WDH" : "",
(mask & OHCI_INTR_SO) ? " SO" : ""
);
}
static void maybe_print_eds (char *label, __u32 value)
{
ed_t *edp = (ed_t *)value;
if (value) {
dbg ("%s %08x", label, value);
dbg ("%08x", edp->hwINFO);
dbg ("%08x", edp->hwTailP);
dbg ("%08x", edp->hwHeadP);
dbg ("%08x", edp->hwNextED);
}
}
static char * hcfs2string (int state)
{
switch (state) {
case OHCI_USB_RESET: return "reset";
case OHCI_USB_RESUME: return "resume";
case OHCI_USB_OPER: return "operational";
case OHCI_USB_SUSPEND: return "suspend";
}
return "?";
}
/* dump control and status registers */
static void ohci_dump_status (ohci_t *controller)
{
struct ohci_regs *regs = controller->regs;
__u32 temp;
temp = readl (®s->revision) & 0xff;
if (temp != 0x10)
dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
temp = readl (®s->control);
dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
(temp & OHCI_CTRL_RWE) ? " RWE" : "",
(temp & OHCI_CTRL_RWC) ? " RWC" : "",
(temp & OHCI_CTRL_IR) ? " IR" : "",
hcfs2string (temp & OHCI_CTRL_HCFS),
(temp & OHCI_CTRL_BLE) ? " BLE" : "",
(temp & OHCI_CTRL_CLE) ? " CLE" : "",
(temp & OHCI_CTRL_IE) ? " IE" : "",
(temp & OHCI_CTRL_PLE) ? " PLE" : "",
temp & OHCI_CTRL_CBSR
);
temp = readl (®s->cmdstatus);
dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
(temp & OHCI_SOC) >> 16,
(temp & OHCI_OCR) ? " OCR" : "",
(temp & OHCI_BLF) ? " BLF" : "",
(temp & OHCI_CLF) ? " CLF" : "",
(temp & OHCI_HCR) ? " HCR" : ""
);
ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus));
ohci_dump_intr_mask ("intrenable", readl (®s->intrenable));
maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent));
maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead));
maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent));
maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead));
maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent));
maybe_print_eds ("donehead", readl (®s->donehead));
}
static void ohci_dump_roothub (ohci_t *controller, int verbose)
{
__u32 temp, ndp, i;
temp = roothub_a (controller);
ndp = (temp & RH_A_NDP);
if (verbose) {
dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
((temp & RH_A_POTPGT) >> 24) & 0xff,
(temp & RH_A_NOCP) ? " NOCP" : "",
(temp & RH_A_OCPM) ? " OCPM" : "",
(temp & RH_A_DT) ? " DT" : "",
(temp & RH_A_NPS) ? " NPS" : "",
(temp & RH_A_PSM) ? " PSM" : "",
ndp
);
temp = roothub_b (controller);
dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
temp,
(temp & RH_B_PPCM) >> 16,
(temp & RH_B_DR)
);
temp = roothub_status (controller);
dbg ("roothub.status: %08x%s%s%s%s%s%s",
temp,
(temp & RH_HS_CRWE) ? " CRWE" : "",
(temp & RH_HS_OCIC) ? " OCIC" : "",
(temp & RH_HS_LPSC) ? " LPSC" : "",
(temp & RH_HS_DRWE) ? " DRWE" : "",
(temp & RH_HS_OCI) ? " OCI" : "",
(temp & RH_HS_LPS) ? " LPS" : ""
);
}
for (i = 0; i < ndp; i++) {
temp = roothub_portstatus (controller, i);
dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
i,
temp,
(temp & RH_PS_PRSC) ? " PRSC" : "",
(temp & RH_PS_OCIC) ? " OCIC" : "",
(temp & RH_PS_PSSC) ? " PSSC" : "",
(temp & RH_PS_PESC) ? " PESC" : "",
(temp & RH_PS_CSC) ? " CSC" : "",
(temp & RH_PS_LSDA) ? " LSDA" : "",
(temp & RH_PS_PPS) ? " PPS" : "",
(temp & RH_PS_PRS) ? " PRS" : "",
(temp & RH_PS_POCI) ? " POCI" : "",
(temp & RH_PS_PSS) ? " PSS" : "",
(temp & RH_PS_PES) ? " PES" : "",
(temp & RH_PS_CCS) ? " CCS" : ""
);
}
}
static void ohci_dump (ohci_t *controller, int verbose)
{
dbg ("OHCI controller usb-%s state", controller->slot_name);
/* dumps some of the state we know about */
ohci_dump_status (controller);
if (verbose)
ep_print_int_eds (controller, "hcca");
dbg ("hcca frame #%04x", controller->hcca->frame_no);
ohci_dump_roothub (controller, 1);
}
#endif /* DEBUG */
/*-------------------------------------------------------------------------*
* Interface functions (URB)
*-------------------------------------------------------------------------*/
/* get a transfer request */
int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, struct devrequest *setup, int interval)
{
ohci_t *ohci;
ed_t * ed;
urb_priv_t *purb_priv;
int i, size = 0;
ohci = &gohci;
/* when controller's hung, permit only roothub cleanup attempts
* such as powering down ports */
if (ohci->disabled) {
err("sohci_submit_job: EPIPE");
return -1;
}
/* if we have an unfinished URB from previous transaction let's
* fail and scream as quickly as possible so as not to corrupt
* further communication */
if (!urb_finished) {
err("sohci_submit_job: URB NOT FINISHED");
return -1;
}
/* we're about to begin a new transaction here so mark the URB unfinished */
urb_finished = 0;
/* every endpoint has a ed, locate and fill it */
if (!(ed = ep_add_ed (dev, pipe))) {
err("sohci_submit_job: ENOMEM");
return -1;
}
/* for the private part of the URB we need the number of TDs (size) */
switch (usb_pipetype (pipe)) {
case PIPE_BULK: /* one TD for every 4096 Byte */
size = (transfer_len - 1) / 4096 + 1;
break;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -