abstract.txt

这本书里共11章

Digital to Analog Converter Example Program
===========================================
Project: DAC
Author:  E. Healy

This example program shows how to configure and use the
D/A Converter of the following microcontroller:

* Philips P87LPC769

The program configures the D/A's and generates a sine wave
on the DAC0 channel and a sawtooth waveform on the DAC1 channel.

To watch the effect this program has on the D/A Converters:

1. Build the program (Project-Build Target)
2. Start the Debugger (Debug-Start/Stop Debug Session)
3. Open the D/A Converter Dialog Box (Peripherals D/A Converter)
4. Make sure View-Periodic Window Update is checked
5. Run the program and watch the D/A outputs change

When the program writes to DAC0 and DAC1 you will see the corresponding
registers change in the D/A Converter dialog.

礦ision3 users may enable the built-in Logic Analyzer to view 
and measure the digital input and analog output signals graphically.