📄 lib_at91rm3400.h
字号:
AT91PS_PMC pPMC, // \arg pointer to PMC controller
unsigned int periphIds) // \arg IDs of peripherals to enable
{
pPMC->PMC_PCER = periphIds;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PMC_DisablePeriphClock
//* \brief Enable peripheral clock
//*----------------------------------------------------------------------------
__inline void AT91F_PMC_DisablePeriphClock (
AT91PS_PMC pPMC, // \arg pointer to PMC controller
unsigned int periphIds) // \arg IDs of peripherals to enable
{
pPMC->PMC_PCDR = periphIds;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PMC_EnablePCK
//* \brief Enable peripheral clock
//*----------------------------------------------------------------------------
__inline void AT91F_PMC_EnablePCK (
AT91PS_PMC pPMC, // \arg pointer to PMC controller
unsigned int pck, // \arg Peripheral clock identifier 0 .. 7
unsigned int ccs, // \arg clock selection: AT91C_PMC_CSS_SLOW_CLK, AT91C_PMC_CSS_MAIN_CLK, AT91C_PMC_CSS_PLLA_CLK, AT91C_PMC_CSS_PLLB_CLK
unsigned int pres) // \arg Programmable clock prescalar AT91C_PMC_PRES_CLK, AT91C_PMC_PRES_CLK_2, ..., AT91C_PMC_PRES_CLK_64
{
pPMC->PMC_PCKR[pck] = ccs | pres;
pPMC->PMC_SCER = (1 << pck) << 8;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PMC_DisablePCK
//* \brief Enable peripheral clock
//*----------------------------------------------------------------------------
__inline void AT91F_PMC_DisablePCK (
AT91PS_PMC pPMC, // \arg pointer to PMC controller
unsigned int pck) // \arg Peripheral clock identifier 0 .. 7
{
pPMC->PMC_SCDR = (1 << pck) << 8;
}
/* *****************************************************************************
SOFTWARE API FOR PIO
***************************************************************************** */
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgPeriph
//* \brief Enable pins to be drived by peripheral
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgPeriph(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int periphAEnable, // \arg PERIPH A to enable
unsigned int periphBEnable) // \arg PERIPH B to enable
{
pPio->PIO_ASR = periphAEnable;
pPio->PIO_BSR = periphBEnable;
pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgOutput
//* \brief Enable PIO in output mode
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgOutput(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int pioEnable) // \arg PIO to be enabled
{
pPio->PIO_PER = pioEnable; // Set in PIO mode
pPio->PIO_OER = pioEnable; // Configure in Output
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgInput
//* \brief Enable PIO in input mode
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgInput(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int inputEnable) // \arg PIO to be enabled
{
// Disable output
pPio->PIO_ODR = inputEnable;
pPio->PIO_PER = inputEnable;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgOpendrain
//* \brief Configure PIO in open drain
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgOpendrain(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int multiDrvEnable) // \arg pio to be configured in open drain
{
// Configure the multi-drive option
pPio->PIO_MDDR = ~multiDrvEnable;
pPio->PIO_MDER = multiDrvEnable;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgPullup
//* \brief Enable pullup on PIO
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgPullup(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int pullupEnable) // \arg enable pullup on PIO
{
// Connect or not Pullup
pPio->PIO_PPUDR = ~pullupEnable;
pPio->PIO_PPUER = pullupEnable;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgDirectDrive
//* \brief Enable direct drive on PIO
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgDirectDrive(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int directDrive) // \arg PIO to be configured with direct drive
{
// Configure the Direct Drive
pPio->PIO_OWDR = ~directDrive;
pPio->PIO_OWER = directDrive;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_CfgInputFilter
//* \brief Enable input filter on input PIO
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_CfgInputFilter(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int inputFilter) // \arg PIO to be configured with input filter
{
// Configure the Direct Drive
pPio->PIO_IFDR = ~inputFilter;
pPio->PIO_IFER = inputFilter;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_GetInput
//* \brief Return PIO input value
//*----------------------------------------------------------------------------
__inline unsigned int AT91F_PIO_GetInput( // \return PIO input
AT91PS_PIO pPio) // \arg pointer to a PIO controller
{
return pPio->PIO_PDSR;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_IsInputSet
//* \brief Test if PIO is input flag is active
//*----------------------------------------------------------------------------
__inline int AT91F_PIO_IsInputSet(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg flag to be tested
{
return (AT91F_PIO_GetInput(pPio) & flag);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_SetOutput
//* \brief Set to 1 output PIO
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_SetOutput(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg output to be set
{
pPio->PIO_SODR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_ClearOutput
//* \brief Set to 0 output PIO
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_ClearOutput(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg output to be cleared
{
pPio->PIO_CODR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_PIO_ForceOutput
//* \brief Force output when Direct drive option is enabled
//*----------------------------------------------------------------------------
__inline void AT91F_PIO_ForceOutput(
AT91PS_PIO pPio, // \arg pointer to a PIO controller
unsigned int flag) // \arg output to be forced
{
pPio->PIO_ODSR = flag;
}
/* *****************************************************************************
SOFTWARE API FOR USART
***************************************************************************** */
//*----------------------------------------------------------------------------
//* \fn AT91F_US_Baudrate
//* \brief Calculate the baudrate
//* Standard Asynchronous Mode : 8 bits , 1 stop , no parity
#define AT91C_US_ASYNC_MODE ( AT91C_US_USMODE_NORMAL + \
AT91C_US_NBSTOP_1_BIT + \
AT91C_US_PAR_NONE + \
AT91C_US_CHRL_8_BITS + \
AT91C_US_CLKS_CLOCK )
//* Standard External Asynchronous Mode : 8 bits , 1 stop , no parity
#define AT91C_US_ASYNC_SCK_MODE ( AT91C_US_USMODE_NORMAL + \
AT91C_US_NBSTOP_1_BIT + \
AT91C_US_PAR_NONE + \
AT91C_US_CHRL_8_BITS + \
AT91C_US_CLKS_EXT )
//* Standard Synchronous Mode : 8 bits , 1 stop , no parity
#define AT91C_US_SYNC_MODE ( AT91C_US_SYNC + \
AT91C_US_USMODE_NORMAL + \
AT91C_US_NBSTOP_1_BIT + \
AT91C_US_PAR_NONE + \
AT91C_US_CHRL_8_BITS + \
AT91C_US_CLKS_CLOCK )
//* SCK used Label
#define AT91C_US_SCK_USED (AT91C_US_CKLO | AT91C_US_CLKS_EXT)
//* Standard ISO T=0 Mode : 8 bits , 1 stop , parity
#define AT91C_US_ISO_READER_MODE ( AT91C_US_USMODE_ISO7816_0 + \
AT91C_US_CLKS_CLOCK +\
AT91C_US_NBSTOP_1_BIT + \
AT91C_US_PAR_EVEN + \
AT91C_US_CHRL_8_BITS + \
AT91C_US_CKLO +\
AT91C_US_OVER)
//*----------------------------------------------------------------------------
//* \fn AT91F_US_Baudrate
//* \brief Caluculate baud_value according to the main clock and the baud rate
//*----------------------------------------------------------------------------
__inline unsigned int AT91F_US_Baudrate (
const unsigned int main_clock, // \arg peripheral clock
const unsigned int baud_rate) // \arg UART baudrate
{
unsigned int baud_value = ((main_clock*10)/(baud_rate * 16));
if ((baud_value % 10) >= 5)
baud_value = (baud_value / 10) + 1;
else
baud_value /= 10;
return baud_value;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_SetBaudrate
//* \brief Set the baudrate according to the CPU clock
//*----------------------------------------------------------------------------
__inline void AT91F_US_SetBaudrate (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int mainClock, // \arg peripheral clock
unsigned int speed) // \arg UART baudrate
{
//* Define the baud rate divisor register
pUSART->US_BRGR = AT91F_US_Baudrate(mainClock, speed);
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_SetTimeguard
//* \brief Set USART timeguard
//*----------------------------------------------------------------------------
__inline void AT91F_US_SetTimeguard (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int timeguard) // \arg timeguard value
{
//* Write the Timeguard Register
pUSART->US_TTGR = timeguard ;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_EnableIt
//* \brief Enable USART IT
//*----------------------------------------------------------------------------
__inline void AT91F_US_EnableIt (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int flag) // \arg IT to be enabled
{
//* Write to the IER register
pUSART->US_IER = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_DisableIt
//* \brief Disable USART IT
//*----------------------------------------------------------------------------
__inline void AT91F_US_DisableIt (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int flag) // \arg IT to be disabled
{
//* Write to the IER register
pUSART->US_IDR = flag;
}
//*----------------------------------------------------------------------------
//* \fn AT91F_US_Configure
//* \brief Configure USART
//*----------------------------------------------------------------------------
__inline void AT91F_US_Configure (
AT91PS_USART pUSART, // \arg pointer to a USART controller
unsigned int mainClock, // \arg peripheral clock
unsigned int mode , // \arg mode Register to be programmed
unsigned int baudRate , // \arg baudrate to be programmed
unsigned int timeguard ) // \arg timeguard to be programmed
{
//* Disable interrupts
pUSART->US_IDR = (unsigned int) -1;
//* Reset receiver and transmitter
pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ;
//* Define the baud rate divisor register
AT91F_US_SetBaudrate(pUSART, mainClock, baudRate);
//* Write the Timeguard Register
AT91F_US_SetTimeguard(pUSART, timeguard);
//* Clear Transmit and Receive Counters
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -