📄 amd_au1200_final_bsdl.txt
字号:
-----------------------------------------------------------------------------
-- AU1200.bsdl - IEEE 1149.1 Boundary Scan Description --
-- --
-- DISCLAIMER: This information is for modeling purposes only, and is --
-- not guaranteed. This information may contain technical inaccuracies --
-- or typographical errors. Advanced Micro Devices reserves the right --
-- to withdraw this information at any time without notice. --
-- Copyright 2002 Advanced Micro Devices, All rights reserved --
-- --
-- ELECTRONICALLY VERIFIED --
-- Rev. 1.0 06/06/2005 -- --
-----------------------------------------------------------------------------
entity AU1200 is
--- Generic Parameter (ref B.8.2) ---
generic (PHYSICAL_PIN_MAP: string:= "BGA_23x23");
--- Logical Port Description (ref B.8.3) ---
port(
DDQ : inout bit_vector (0 to 31);
DDQS : inout bit_vector (0 to 3);
DDM : out bit_vector (0 to 3);
RAD : inout bit_vector (0 to 14);
RD : inout bit_vector (0 to 15);
RBE_n : inout bit_vector (0 to 1);
ROE_n : inout bit;
RCS_n : inout bit_vector (0 to 3);
RWE_n : inout bit;
RALE : inout bit;
RCLK : out bit;
RCLE : inout bit;
RNB : inout bit;
--SD0_CLK : inout bit; -- muxed with GPIO(17)
--SD0_CMD : inout bit; -- muxed with GPIO(28)
--SD0_DAT0 : inout bit; -- muxed with GPIO(19)
--SD0_DAT1 : inout bit; -- muxed with GPIO(8)
--SD0_DAT2 : inout bit; -- muxed with GPIO(6)
--SD0_DAT3 : inout bit; -- muxed with GPIO(26)
--SD1_CLK : out bit; -- muxed with PIOW_n
--SD1_CMD : inout bit; -- muxed with PIOR_n
--SD1_DAT0 : inout bit; -- muxed with PWAIT_n
--SD1_DAT1 : inout bit; -- muxed with POE_n
--SD1_DAT2 : inout bit; -- muxed with PIOS16_n
--SD1_DAT3 : inout bit; -- muxed with PWE_n
--CIM_CLK : in bit; -- muxed with GPIO(214)
--CIM_D0 : in bit; -- muxed with GPIO(0)
--CIM_D1 : in bit; -- muxed with GPIO(1)
--CIM_D2 : in bit; -- muxed with GPIO2(2)
--CIM_D3 : in bit; -- muxed with GPIO2(3)
--CIM_D4 : in bit; -- muxed with GPIO2(4)
--CIM_D5 : in bit; -- muxed with GPIO2(5)
--CIM_D6 : in bit; -- muxed with GPIO2(6)
--CIM_D7 : in bit; -- muxed with GPIO2(7)
--CIM_D8 : in bit; -- muxed with GPIO2(8)
--CIM_D9 : in bit; -- muxed with GPIO2(9)
--CIM_FS : out bit; -- muxed with GPIO2(13)
--CIM_LS : out bit; -- muxed with GPIO2(12)
--DMA_REQ0 : in bit; -- muxed with GPIO(4)
--DMA_REQ1 : inout bit; -- muxed with GPIO(12)
--EXTCLK0 : out bit; -- muxed with GPIO(2)
--EXTLCLK1 : out bit; -- muxed with GPIO(3)
EWAIT_n : in bit;
PREG_n : inout bit;
PCE_n : inout bit_vector (1 to 2);
PWE_n : inout bit;
PWAIT_n : inout bit;
POE_n : inout bit;
PIOW_n : inout bit;
PIOS16_n : inout bit;
PIOR_n : inout bit;
--PSC0_CLK : inout bit; -- muxed with GPIO(25)
--PSC0_D0 : inout bit; -- muxed with GPIO(18)
--PSC0_D1 : inout bit; -- muxed with GPIO(31)
--PSC0_SYNC0 : inout bit; -- muxed with GPIO2(15)
--PSC0_SYNC1 : inout bit; -- muxed with GPIO(16)
--PSC1_CLK : inout bit; -- muxed with GPIO(24)
--PSC1_D0 : inout bit; -- muxed with GPIO(11)
--PSC1_D1 : inout bit; -- muxed with GPIO(22)
--PSC1_EXTCLK : inout bit; -- muxed with GPIO(23)
--PSC1_SYNC0 : inout bit; -- muxed with GPIO(20)
--PSC1_SYNC1 : inout bit; -- muxed with GPIO(21)
HD_CS_n : inout bit_vector (0 to 1);
FWTOY_n : in bit;
WAKE_n : out bit;
RESETIN_n : in bit;
RESETOUT_n : out bit;
BOOT : inout bit_vector (0 to 1);
TESTEN : in bit;
FTM : in bit;
TC : in bit_vector (0 to 3);
TDI : in bit;
TDO : out bit;
TCK : in bit;
TMS : in bit;
TRST_n : in bit;
USBVDDX : linkage bit_vector (0 to 8);
USBVDDI : linkage bit_vector (0 to 1);
USBVSS : linkage bit_vector (0 to 5);
--USBATEST : buffer bit; -- manufacturing pin, leave open
--USBDP : inout bit;
--USBDM : inout bit;
--USBXI : in bit;
--USBXO : out bit;
--USBHP : inout bit;
--USBHM : inout bit;
USBREXT : linkage bit;
--USBVBUS : inout bit;
--USBOTGID : inout bit;
U1RI_n : inout bit;
U1DCD_n : inout bit;
--U0RXD : inout bit; -- muxed with GPIO(29)
--U0TXD : inout bit; -- muxed with GPIO(27)
--U1CTS : inout bit; -- muxed with GPIO(9)
--U1DSR : inout bit; -- muxed with GPIO(10)
--U1DTR : inout bit; -- muxed with GPIO(14)
--U1RTS : inout bit; -- muxed with GPIO(13)
--U1RXD : inout bit; -- muxed with GPIO(30)
--U1TXD : inout bit; -- muxed with GPIO(15)
LCD_FCLK : inout bit;
LCD_LCLK : inout bit;
LCD_PCLK : inout bit;
LCD_BIAS : inout bit;
--LCD_D0 : inout bit; -- muxed with GPIO2(0)
--LCD_D1 : inout bit; -- muxed with GPIO2(1)
LCD_D2 : inout bit;
LCD_D3 : inout bit;
LCD_D4 : inout bit;
LCD_D5 : inout bit;
LCD_D6 : inout bit;
LCD_D7 : inout bit;
--LCD_D8 : inout bit; -- muxed with GPIO2(10)
LCD_D9 : inout bit;
LCD_D10 : inout bit;
LCD_D11 : inout bit;
LCD_D12 : inout bit;
LCD_D13 : inout bit;
LCD_D14 : inout bit;
LCD_D15 : inout bit;
--LCD_D16 : inout bit; -- muxed with GPIO2(11)
LCD_D17 : inout bit;
LCD_D18 : inout bit;
LCD_D19 : inout bit;
LCD_D20 : inout bit;
LCD_D21 : inout bit;
LCD_D22 : inout bit;
LCD_D23 : inout bit;
--LCD_PWM0 : inout bit; -- muxed with U1DCD_n
--LCD_PWM1 : inout bit; -- muxed with U1RI_n
DA : out bit_vector (0 to 13);
DRVSEL : in bit;
DCAS_n : out bit;
DCS_n : out bit_vector (0 to 1);
DRAS_n : out bit;
DBA : out bit_vector (0 to 1);
DCKE : out bit;
DCK : out bit_vector (0 to 1);
DCK_n : out bit_vector (0 to 1);
DWE_n : out bit;
DVREF : in bit;
GPIO : inout bit_vector (0 to 31);
GPIO2 : inout bit_vector (0 to 15);
XTI32 : linkage bit;
XTO32 : linkage bit;
XTI12 : linkage bit;
XTO12 : linkage bit;
PWR_EN : linkage bit;
VDDXOK : in bit;
VDDI : linkage bit_vector (0 to 15);
VDDX : linkage bit_vector (0 to 24);
VDDY : linkage bit_vector (0 to 14);
VSS : linkage bit_vector (0 to 62);
XPWR32 : linkage bit;
XAGND32 : linkage bit;
XPWR12 : linkage bit;
XAGND12 : linkage bit
);
--- Standard Use Statement (ref B.8.4) ---
use STD_1149_1_1994.all;
--- Component Conformance Statement (ref B.8.6) ---
attribute COMPONENT_CONFORMANCE of AU1200: entity is "STD_1149_1_1993";
--- Device Package Pin Mappings (ref B.8.7) ---
attribute PIN_MAP of AU1200 : entity is PHYSICAL_PIN_MAP;
constant BGA_23x23 : PIN_MAP_STRING :=
"DDQ : (AB2, AA4, AA5, AC5, AA7, AC7, Y9,AC9, " &
"AC12, AA11, Y11, AB8, AB6, AC3, Y3, W4, " &
"AA3, AC2, AB4, AC4, Y7, Y8, AA8, AA9, " &
"AC11, AB10, AC8, AA10, AC6, Y6, Y5, AB1), " &
"DDQS : (AC14, Y12, AC10, AC13), " &
"DDM : (AA14, Y13, AB12, AC15), " &
"RAD : (R3, R1, T1, P2, P1, N4, N1, P3, N3, M2, " &
"L4, K1, L1, M3, M1), " &
"RD : (AA1, V4, V3, W1, V2, U3, T3, T2, Y2, W3, " &
"Y1, U4, V1, T4, U1, R4), " &
"RBE_n : (J4, H2), " &
"ROE_n : K2, " &
"RCS_n : (H3, G4, G3, E1), " &
"RWE_n : J1, " &
"RALE : H1, " &
"RCLK : L3, " &
"RCLE : K3, " &
"RNB : D5, " &
"EWAIT_n : M4, " &
"PREG_n : D1, " &
"PCE_n : (E3, F4), " &
"PWE_n : H4, " &
"PWAIT_n : J3, " &
"POE_n : F1, " &
"PIOW_n : F2, " &
"PIOS16_n : F3, " &
"PIOR_n : G1, " &
"HD_CS_n : (D2, C1), " &
"FWTOY_n : A2, " &
"WAKE_n : B2, " &
"RESETIN_n : B7, " &
"RESETOUT_n : V20, " &
"BOOT : (A10, D13), " &
"TESTEN : D11, " &
"FTM : C11, " &
"TC : (A7, A8, C9, D9), " &
"TDI : B17, " &
"TDO : A17, " &
"TCK : C16, " &
"TMS : D15, " &
"TRST_n : D16, " &
"USBVDDX : (D21, E21, F21, G21, H19, H20, H21, " &
"J20, J21), " &
"USBVDDI : (D23, J23), " &
"USBVSS : (E19, E20, F19, F20, G19, G20), " &
--"USBATEST : D22, " &
--"USBDP : E22, " &
--"USBDM : E23, " &
--"USBXI : F22, " &
--"USBXO : F23, " &
--"USBHP : G22, " &
--"USBHM : G23, " &
"USBREXT : H22, " &
--"USBVBUS : H23, " &
--"USBOTGID : J22, " &
"U1RI_n : K21, " &
"U1DCD_n : K22, " &
"LCD_FCLK : K23, " &
"LCD_LCLK : L20, " &
"LCD_PCLK : L21, " &
"LCD_BIAS : L23, " &
"LCD_D2 : M23, " &
"LCD_D3 : N23, " &
"LCD_D4 : N21, " &
"LCD_D5 : N20, " &
"LCD_D6 : P23, " &
"LCD_D7 : P22, " &
"LCD_D9 : R23, " &
"LCD_D10 : R21, " &
"LCD_D11 : T23, " &
"LCD_D12 : R20, " &
"LCD_D13 : T22, " &
"LCD_D14 : T21, " &
"LCD_D15 : U23, " &
"LCD_D17 : V23, " &
"LCD_D18 : U21, " &
"LCD_D19 : V22, " &
"LCD_D20 : W23, " &
"LCD_D21 : V21, " &
"LCD_D22 : Y23, " &
"LCD_D23 : W21, " &
"DA : (AA20, W20, AA21, Y21, AB23, AB22, " &
"AC22, AC21, AB20, AC20, Y19, AC19, " &
"AB18, AA15), " &
"DRVSEL : Y22, " &
"DCAS_n : Y15, " &
"DCS_n : (AA17, Y16), " &
"DRAS_n : Y17, " &
"DBA : (Y18, AA19), " &
"DCKE : AA16, " &
"DCK : (AC18, AB16), " &
"DCK_n : (AC17, AC16), " &
"DWE_n : AB14, " &
"DVREF : AA13, " &
"GPIO : (B9, C7, D8, C8, D7, C10, D6, A9, A5, " &
"A18, C17, C19, B19, A20, D18, A19, C22, " &
"B1, B23, E4, C20, C18, A21, B21, A22, C23, " &
"D3, D17, B5, C15, A16, C21), " &
"GPIO2 : (M21, M22, B15, A15, C14, A14, B13, " &
"C13, A13, A12, P21, T20, C12, A11, " &
"B11, D20), " &
"XTI32 : A3, " &
"XTO32 : B3, " &
"XTI12 : A4, " &
"XTO12 : B4, " &
"PWR_EN : A6, " &
"VDDXOK : AA23, " &
"VDDI : (E10, E11, E13, E14, K5, K19, L5, L19, " &
"N5, N19, P5, P19, W10, W11, W13, W14), " &
"VDDX : (D4, D10, D14, D19, E5, E6, E7, E8, " &
"E16, E17, E18, F5, G5, H5, K4, K20, " &
"P4, P20, T5, T19, U5, U19, U20, V5, " &
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -