errmes.pas

西门子与计算机通讯程序包括源代码 程序说明 控件 及控件使用手册 使用西门子prodave 控件 这是第一版

unit errmes;

interface
resourcestring
errorcode0000 =' ** ERROR.DAT = error text file for PRODAVE MPI  **  ';
errorcode00CA ='no resources available ';
errorcode00CE =' module not found ';
errorcode00CF =' driver not loaded ';
errorcode00E1 =' too many channels open  ';
errorcode00E9 =' sin_serv.exe not started ';
errorcode00F1 =' no global dos storage available ';
errorcode0101 =' connection not established / configured   ';
errorcode010A =' negative acknowledgement received / timeout error  ';
errorcode010C =' data does not exist or disabled   ';
errorcode0201 =' incorrect interface specified     ';
errorcode0202 =' maximum amount of interfaces exceeded   ';
errorcode0203 =' Toolbox already installed       ';
errorcode0204 =' Toolbox already installed with other connections  ';
errorcode0205 =' Toolbox not installed  ';
errorcode0206 =' handle cannot be set ';
errorcode0207 =' data segment cannot be disabled ';
errorcode0209 =' incorrect data field ';
errorcode0302 =' block too small, DW does not exist ';
errorcode0303 =' block limit exceeded, correct amount ';
errorcode0310 =' module not found ';
errorcode0311 =' hardware error ';
errorcode0312 =' incorrect configuration parameters ';
errorcode0313 =' incorrect baud rate / interrupt vector ';
errorcode0314 =' incorrect HSA ';
errorcode0315 =' MPI address error ';
errorcode0316 =' HW device already allocated';
errorcode0317 =' interrupt not available ';
errorcode0318 =' interrupt occupied ';
errorcode031A =' connection error ';
errorcode0320 =' hardware error ';
errorcode0330 =' version conflict';
errorcode0331 =' COM error ';
errorcode0332 =' no response ';
errorcode0333 =' COM error ';
errorcode0334 =' COM error ';
errorcode0336 =' no modem connection establis';
errorcode0337 =' job rejected ';
errorcode0381 =' device does not exist ';
errorcode0382 =' no driver or device found ';
errorcode0384 =' no driver or device found ';
errorcode03FF =' system fault ';
errorcode4001 =' connection not known ';
errorcode4002 =' connection not established ';
errorcode4003 =' connection is being establishe';
errorcode4004 =' connection broken down ';
errorcode8000=' Toolbox occupied ';
errorcode8001 =' not allowed in this operating st';
errorcode8101 =' hardware error ';
errorcode8103 =' object access not allowed  ';
errorcode8104 =' context is not supported ';
errorcode8105 =' invalid address ';
errorcode8106 =' type (data type) not supported';
errorcode8107 =' type (data type) not consistent';
errorcode810A =' object does not exist';
errorcode8301 =' memory capacity on CPU not sufficient ';
errorcode8404 =' grave error ';
errorcode8500 =' incorrect PDU size ';
errorcode8702 =' address invalid  ';
errorcodeD201 =' syntax error block name ';
errorcodeD202 =' syntax error function parameter ';
errorcodeD203 =' syntax error block type ';
errorcodeD204 =' no linked block in storage medium ';
errorcodeD205 =' object already exists  ';
errorcodeD206 =' object already exists  ';
errorcodeD207 =' block exists in EPROM ';
errorcodeD209 =' block does not exist ';
errorcodeD20E =' no block available ';
errorcodeD210 =' block number too big ';
errorcodeD241 =' protection level of function not sufficient ';
errorcodeD406 =' information not available  ';
errorcodeEF01 =' incorrect ID2 ';
errorcodeFFFE =' unknown error FFFE hex ';
errorcodeFFFF =' timeout error. Check interface';




 
implementation

end.