📄 pic.c
字号:
/* Copy the first half of the message. */
i = (INT) copy_size;
do
{
*(destination) = *(source++);
if ((--i) == 0)
break;
destination++;
} while (1);
/* Copy the second half of the message. */
destination = pipe -> pi_start;
i = (INT) (size - copy_size);
do
{
*(destination++) = *(source);
if ((--i) == 0)
break;
source++;
} while (1);
}
}
/* Check again for wrap-around condition on the write pointer. */
if (destination >= pipe -> pi_end)
/* Move the write pointer to the top of the pipe area. */
destination = pipe -> pi_start;
/* Determine if the pipe supports variable-length messages. If
so, pad bytes are needed to keep UNSIGNED alignment. */
if (pad)
{
/* Variable-size message. Add pad bytes to the write
pointer. */
/* Calculate the number of bytes remaining from the write
pointer to the bottom of the pipe. */
copy_size = pipe -> pi_end - destination;
/* If there is not enough room at the bottom of the pipe, the
pad bytes must be wrapped around to the top. */
if (copy_size <= pad)
/* Move write pointer to the top of the pipe and make the
necessary adjustment. */
destination = pipe -> pi_start + (pad - copy_size);
else
/* There is enough room in the pipe to simply add the
the pad bytes to the write pointer. */
destination = destination + pad;
/* Decrement the number of available bytes. */
pipe -> pi_available = pipe -> pi_available - pad;
}
/* Update the actual write pointer. */
pipe -> pi_write = destination;
/* Decrement the number of available bytes. */
pipe -> pi_available = pipe -> pi_available - size;
/* Increment the number of messages in the pipe. */
pipe -> pi_messages++;
#ifdef INCLUDE_PROVIEW
_RTProf_DumpPipe(RT_PROF_SEND_TO_PIPE,pipe,RT_PROF_OK);
#endif
}
}
/* Release protection against access to the pipe. */
TCT_Unprotect();
/* Return the completion status. */
return(status);
}
/*************************************************************************/
/* */
/* FUNCTION */
/* */
/* PIC_Receive_From_Pipe */
/* */
/* DESCRIPTION */
/* */
/* This function receives a message from the specified pipe. The */
/* size of the message is specified by the caller. If there is a */
/* message currently in the pipe, the message is removed from the */
/* pipe and placed in the caller's area. Suspension is possible */
/* if the request cannot be satisfied. */
/* */
/* AUTHOR */
/* */
/* Accelerated Technology, Inc. */
/* */
/* CALLED BY */
/* */
/* Application */
/* PICE_Receive_From_Pipe Error checking shell */
/* */
/* CALLS */
/* */
/* CSC_Place_On_List Place on suspend list */
/* CSC_Remove_From_List Remove from suspend list */
/* [HIC_Make_History_Entry] Make entry in history log */
/* TCC_Resume_Task Resume a suspended task */
/* TCC_Suspend_Task Suspend calling task */
/* TCC_Task_Priority Pickup task's priority */
/* [TCT_Check_Stack] Stack checking function */
/* TCT_Control_To_System Transfer control to system */
/* TCT_Current_Thread Pickup current thread pointer*/
/* TCT_System_Protect Protect pipe */
/* TCT_Unprotect Release protection */
/* */
/* INPUTS */
/* */
/* pipe_ptr Pipe control block pointer */
/* message Pointer to message to send */
/* size Size of the message */
/* actual_size Size of message received */
/* suspend Suspension option if empty */
/* */
/* OUTPUTS */
/* */
/* NU_SUCCESS If service is successful */
/* NU_PIPE_EMPTY If pipe is currently empty */
/* NU_TIMEOUT If timeout on service expires*/
/* NU_PIPE_DELETED If pipe was deleted during */
/* suspension */
/* NU_PIPE_RESET If pipe was reset during */
/* suspension */
/* */
/* HISTORY */
/* */
/* DATE REMARKS */
/* */
/* 03-01-1993 Created initial version 1.0 */
/* 04-19-1993 Verified version 1.0 */
/* 03-01-1994 Changed function interfaces to */
/* match those in prototype, */
/* added register options, changed */
/* protection logic to reduce */
/* overhead, optimized copy loop, */
/* resulting in version 1.1 */
/* */
/* 03-18-1994 Verified version 1.1 */
/* */
/*************************************************************************/
STATUS PIC_Receive_From_Pipe(NU_PIPE *pipe_ptr, VOID *message,
UNSIGNED size, UNSIGNED *actual_size, UNSIGNED suspend)
{
R1 PI_PCB *pipe; /* Pipe control block ptr */
PI_SUSPEND suspend_block; /* Allocate suspension block */
PI_SUSPEND *suspend_ptr; /* Pointer to suspend block */
R2 BYTE_PTR source; /* Pointer to source */
R3 BYTE_PTR destination; /* Pointer to destination */
TC_TCB *task; /* Task pointer */
UNSIGNED copy_size; /* Number of bytes to copy */
UNSIGNED pad = 0; /* Number of pad bytes */
R4 INT i; /* Working counter */
STATUS preempt; /* Preemption flag */
STATUS status; /* Completion status */
/* Move input pipe pointer into internal pointer. */
pipe = (PI_PCB *) pipe_ptr;
#ifdef NU_ENABLE_STACK_CHECK
/* Call stack checking function to check for an overflow condition. */
TCT_Check_Stack();
#endif
#ifdef NU_ENABLE_HISTORY
/* Make an entry that corresponds to this function in the system history
log. */
HIC_Make_History_Entry(NU_RECEIVE_FROM_PIPE_ID, (UNSIGNED) pipe,
(UNSIGNED) message, (UNSIGNED) size);
#endif
/* Initialize the status as successful. */
status = NU_SUCCESS;
/* Protect against simultaneous access to the pipe. */
TCT_System_Protect();
/* Determine if an urgent message request is currently suspended. */
if (pipe -> pi_urgent_list)
{
/* If so, copy the message from the suspended request block and
resume the associated task. */
/* Decrement the number of tasks waiting on pipe. */
pipe -> pi_tasks_waiting--;
/* Remove the first suspended block from the list. */
suspend_ptr = pipe -> pi_urgent_list;
CSC_Remove_From_List((CS_NODE **) &(pipe -> pi_urgent_list),
&(suspend_ptr -> pi_suspend_link));
/* Setup the source and destination pointers. */
destination = (BYTE_PTR) message;
source = suspend_ptr -> pi_message_area;
/* Initialize the return status. */
suspend_ptr -> pi_return_status = NU_SUCCESS;
/* Loop to actually copy the message. */
i = (INT) size;
do
{
*(destination++) = *(source);
if ((--i) == 0)
break;
source++;
} while (1);
/* Return the size of the message copied. */
*actual_size = suspend_ptr -> pi_message_size;
/* Wakeup the waiting task and check for preemption. */
preempt =
TCC_Resume_Task((NU_TASK *) suspend_ptr -> pi_suspended_task,
NU_PIPE_SUSPEND);
/* Determine if preemption needs to take place. */
if (preempt)
/* Transfer control to the system if the resumed task function
detects a preemption condition. */
TCT_Control_To_System();
}
/* Determine if there are messages in the pipe. */
else if (pipe -> pi_messages)
{
/* Copy message from pipe into the caller's area. */
/* Setup the source and destination pointers. */
destination = (BYTE_PTR) message;
source = pipe -> pi_read;
/* Process according to the type of message supported by the pipe. */
if (pipe -> pi_fixed_size)
{
/* Pipe supports fixed-size messages. */
/* Copy the message from the pipe area into the destination. */
i = (INT) size;
do
{
*(destination) = *(source++);
if ((--i) == 0)
break;
destination++;
} while (1);
}
else
{
/* Pipe supports variable-size messages. */
/* Variable length message size is actually in the pipe area. */
size = *((UNSIGNED *) source);
source = source + sizeof(UNSIGNED);
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -