电源.err

来自「一些Ｃ语言单片机程序」· ERR 代码 · 共 42 行

C1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C3 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C3 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C3 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
C4 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
C4 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
C4 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
D1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
D1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
D1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
D1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
D1 Error: Duplicate Designator ATTRIBUTE entered
D1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
D1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
D2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
D2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
D2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
J1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
J1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
J1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
J2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
J2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
J2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
R1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
R1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
R1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
R2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
R2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
R2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
T1 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
T1 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
T1 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
U2 Error: Pin order data (PINS=1:[<pins>]) not in READ ONLY field 4. Pins sorted by pin-name.
U2 Error: Part type must be entered in READ ONLY field 1: type=<part type>(<spice prefix>)
U2 Error: Netlist data must be entered in READ ONLY field 5: netlist=<netlist data>
Setup Error: GND Spice Reference Net (specified in Analog Options) is not in the schematic.