lcd_show.h

来自「51单片机C程序,学习单片机原理、硬件结构、扩展接口和编程语言。」· C头文件 代码 · 共 43 行

/*****************************************/
/* Copyright (c) 2005, 通信工程学院        */
/* All rights reserved.                  */
/* /* 作    者：戴佳				      */
/*****************************************/

#ifndef	_LCD_SHOW_H 				// 防止lcd_show.h被重复引用

#define	_LCD_SHOW_H

#include <at898252.h>
#include <absacc.h>

unsigned char code QING[32]={
/* 请 */
0x20,0x22,0xEC,0x00,0x20,0x22,0xAA,0xAA,
0xAA,0xBF,0xAA,0xAA,0xEB,0xA2,0x20,0x00,
0x00,0x00,0x7F,0x20,0x10,0x00,0xFF,0x0A,
0x0A,0x0A,0x4A,0x8A,0x7F,0x00,0x00,0x00
};

unsigned char code CHA[32]={
/* 插 */
0x10,0x10,0x10,0xFF,0x90,0x24,0x24,0xA4,
0x24,0xFC,0x22,0x23,0x22,0xB0,0x20,0x00,
0x02,0x42,0x81,0x7F,0x00,0xFF,0x49,0x48,
0x40,0x7F,0x40,0x49,0x49,0xFF,0x01,0x00
};

unsigned char code KA[32]={
/* 卡 */
0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x44,
0x44,0x44,0x46,0x44,0x40,0x60,0x40,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,
0x02,0x04,0x0C,0x18,0x00,0x00,0x00,0x00
};


#define LCD XBYTE[0xffff] /* LCD端口 */

#endif