watch - cadcam read-me.txt

来自「一个始终的设计。。大家看看择那么杨水电开发聚少离多看」· 文本 代码 · 共 42 行

LABCENTER PROTEUS TOOL INFORMATION FILE
=======================================

In case of difficulty, please e-mail [e-mail]

Tool set up for Proteus layout 'C:\Documents and Settings\ustb_angle\My Documents\proteus\mine\C\Watch\watch.LYT'.
CADCAM generated at 20:55:52 on 2006年8月20日.

File List
---------
Top Copper              : watch - CADCAM Top Copper.TXT
Bottom Copper           : watch - CADCAM Bottom Copper.TXT
Top Silk Screen         : watch - CADCAM Top Silk Screen.TXT
Bottom Solder Resist    : watch - CADCAM Bottom Solder Resist.TXT
Top SMT Paste Mask      : watch - CADCAM Top SMT Paste Mask.TXT
Drill                   : watch - CADCAM Drill.TXT

Photoplotter Setup
------------------
Format: RS274X, ASCII, 2.4, imperial, absolute, eob=*, LZO
Notes:  D=Diameter, S=Side, W=Width, H=Height

D10	SQUARE	S=50th                                      FLASH
D11	CIRCLE	D=50th                                      FLASH
D12	CIRCLE	D=70th                                      FLASH
D13	CIRCLE	D=60th                                      FLASH
D14	CIRCLE	D=80th                                      FLASH
D15	CIRCLE	D=8th                                       DRAW
D16	SMT	W=70th                H=70th                FLASH
D17	CIRCLE	D=90th                                      FLASH
D18	CIRCLE	D=100th                                     FLASH

NC Drill Setup
--------------
Format: ASCII, 2.4, imperial, absolute, eob=<CR><LF>, no zero suppression.
Notes:  Tool sizes are diameters. Layer sets are in brackets - 0=TOP, 15=BOTTOM, 1-14=INNER.

T01	30th (0-15)


[END OF FILE]