aclocal.m4

一个简单的文本编辑器

  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])

# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
changequote(,)dnl
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_PROG_LD_GNU
])

AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi])
])

# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$lt_target" in
*-*-beos* | *-*-cygwin*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-convenience to the
# configure arguments.  Note that LIBLTDL and INCLTDL are not
# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If DIR is not
# provided, it is assumed to be `libltdl'.  LIBLTDL will be prefixed
# with '${top_builddir}/' and INCLTDL will be prefixed with
# '${top_srcdir}/' (note the single quotes!).  If your package is not
# flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case "$enable_ltdl_convenience" in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
  INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library and INCLTDL to the include flags for
# the libltdl header and adds --enable-ltdl-install to the configure
# arguments.  Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
# AC_CONFIG_SUBDIRS called.  If DIR is not provided and an installed
# libltdl is not found, it is assumed to be `libltdl'.  LIBLTDL will
# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
# with '${top_srcdir}/' (note the single quotes!).  If your package is
# not flat and you're not using automake, define top_builddir and
# top_srcdir appropriately in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
    INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    INCLTDL=
  fi
])

dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl

dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl

dnl
dnl GNOME_INIT_HOOK (script-if-gnome-enabled, [failflag], [additional-inits])
dnl
dnl if failflag is "fail" then GNOME_INIT_HOOK will abort if gnomeConf.sh
dnl is not found. 
dnl

AC_DEFUN([GNOME_INIT_HOOK],[
	AC_SUBST(GNOME_LIBS)
	AC_SUBST(GNOMEUI_LIBS)
	AC_SUBST(GNOMEGNORBA_LIBS)
	AC_SUBST(GTKXMHTML_LIBS)
	AC_SUBST(ZVT_LIBS)
	AC_SUBST(GNOME_LIBDIR)
	AC_SUBST(GNOME_INCLUDEDIR)

	AC_ARG_WITH(gnome-includes,
	[  --with-gnome-includes   Specify location of GNOME headers],[
	CFLAGS="$CFLAGS -I$withval"
	])
	
	AC_ARG_WITH(gnome-libs,
	[  --with-gnome-libs       Specify location of GNOME libs],[
	LDFLAGS="$LDFLAGS -L$withval"
	gnome_prefix=$withval
	])

	AC_ARG_WITH(gnome,
	[  --with-gnome            Specify prefix for GNOME files],
		if test x$withval = xyes; then
	    		want_gnome=yes
	    		dnl Note that an empty true branch is not
			dnl valid sh syntax.
	    		ifelse([$1], [], :, [$1])
        	else
	    		if test "x$withval" = xno; then
	        		want_gnome=no
	    		else
	        		want_gnome=yes
	    			LDFLAGS="$LDFLAGS -L$withval/lib"
	    			CFLAGS="$CFLAGS -I$withval/include"
	    			gnome_prefix=$withval/lib
	    		fi
  		fi,
		want_gnome=yes)

	if test "x$want_gnome" = xyes; then

	    AC_PATH_PROG(GNOME_CONFIG,gnome-config,no)
	    if test "$GNOME_CONFIG" = "no"; then
	      no_gnome_config="yes"
	    else
	      AC_MSG_CHECKING(if $GNOME_CONFIG works)
	      if $GNOME_CONFIG --libs-only-l gnome >/dev/null 2>&1; then
	        AC_MSG_RESULT(yes)
	        GNOME_GNORBA_HOOK([],$2)
	        GNOME_LIBS="`$GNOME_CONFIG --libs-only-l gnome`"
	        GNOMEUI_LIBS="`$GNOME_CONFIG --libs-only-l gnomeui`"
	        GNOMEGNORBA_LIBS="`$GNOME_CONFIG --libs-only-l gnorba gnomeui`"
	        GTKXMHTML_LIBS="`$GNOME_CONFIG --libs-only-l gtkxmhtml`"
		ZVT_LIBS="`$GNOME_CONFIG --libs-only-l zvt`"
	        GNOME_LIBDIR="`$GNOME_CONFIG --libs-only-L gnorba gnomeui`"
	        GNOME_INCLUDEDIR="`$GNOME_CONFIG --cflags gnorba gnomeui`"
                $1
	      else
	        AC_MSG_RESULT(no)
	        no_gnome_config="yes"
              fi
            fi

	    if test x$exec_prefix = xNONE; then
	        if test x$prefix = xNONE; then
		    gnome_prefix=$ac_default_prefix/lib
	        else
 		    gnome_prefix=$prefix/lib
	        fi
	    else
	        gnome_prefix=`eval echo \`echo $libdir\``
	    fi
	
	    if test "$no_gnome_config" = "yes"; then
              AC_MSG_CHECKING(for gnomeConf.sh file in $gnome_prefix)
	      if test -f $gnome_prefix/gnomeConf.sh; then
	        AC_MSG_RESULT(found)
	        echo "loading gnome configuration from" \
		     "$gnome_prefix/gnomeConf.sh"
	        . $gnome_prefix/gnomeConf.sh
	        $1
	      else
	        AC_MSG_RESULT(not found)
 	        if test x$2 = xfail; then
	          AC_MSG_ERROR(Could not find the gnomeConf.sh file that is generated by gnome-libs install)
 	        fi
	      fi
            fi
	fi

	if test -n "$3"; then
	  n="$3"
	  for i in $n; do
	    AC_MSG_CHECKING(extra library \"$i\")
	    case $i in 
	      applets)
		AC_SUBST(GNOME_APPLETS_LIBS)
		GNOME_APPLETS_LIBS=`$GNOME_CONFIG --libs-only-l applets`
		AC_MSG_RESULT($GNOME_APPLETS_LIBS);;
	      docklets)
		AC_SUBST(GNOME_DOCKLETS_LIBS)
		GNOME_DOCKLETS_LIBS=`$GNOME_CONFIG --libs-only-l docklets`
		AC_MSG_RESULT($GNOME_DOCKLETS_LIBS);;
	      capplet)
		AC_SUBST(GNOME_CAPPLET_LIBS)
		GNOME_CAPPLET_LIBS=`$GNOME_CONFIG --libs-only-l capplet`
		AC_MSG_RESULT($GNOME_CAPPLET_LIBS);;
	      *)
		AC_MSG_RESULT(unknown library)
	    esac
	  done
	fi
])

dnl
dnl GNOME_INIT ([additional-inits])
dnl

AC_DEFUN([GNOME_INIT],[
	GNOME_INIT_HOOK([],fail,$1)
])

dnl
dnl GNOME_GNORBA_HOOK (script-if-gnorba-found, failflag)
dnl
dnl if failflag is "failure" it aborts if gnorba is not found.
dnl

AC_DEFUN([GNOME_GNORBA_HOOK],[
	GNOME_ORBIT_HOOK([],$2)
	AC_CACHE_CHECK([for gnorba libraries],gnome_cv_gnorba_found,[
		gnome_cv_gnorba_found=no
		if test x$gnome_cv_orbit_found = xyes; then
			GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
			GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
			if test -n "$GNORBA_LIBS"; then
				gnome_cv_gnorba_found=yes
			fi
		fi
	])
	AM_CONDITIONAL(HAVE_GNORBA, test x$gnome_cv_gnorba_found = xyes)
	if test x$gnome_cv_orbit_found = xyes; then
		$1
		GNORBA_CFLAGS="`gnome-config --cflags gnorba gnomeui`"
		GNORBA_LIBS="`gnome-config --libs gnorba gnomeui`"
		AC_SUBST(GNORBA_CFLAGS)
		AC_SUBST(GNORBA_LIBS)
	else
	    	if test x$2 = xfailure; then
			AC_MSG_ERROR(gnorba library not installed or installation problem)
	    	fi
	fi
])

AC_DEFUN([GNOME_GNORBA_CHECK], [
	GNOME_GNORBA_HOOK([],failure)
])

dnl
dnl GNOME_ORBIT_HOOK (script-if-orbit-found, failflag)
dnl
dnl if failflag is "failure" it aborts if orbit is not found.
dnl

AC_DEFUN([GNOME_ORBIT_HOOK],[
	AC_PATH_PROG(ORBIT_CONFIG,orbit-config,no)