udemode.h

S1D13506windml下的驱动程序,支持vxworks5.4 支持tornado2.0 windml2.0

/***************************************************************************
 *                                                                         * 
 *  UDEMODE.H - EPSON S1D13506 configurations.                             * 
 *                                                                         *    
 *  Copyright (c) 2000, 2001 Epson Research and Development, Inc.          *
 *  All Rights Reserved                                                    *
 *                                                                         *     
 *  THIS SOURCE CODE IS FOR TEST ONLY.                                     *
 *                                                                         *    
 ***************************************************************************/
//
// $Header: /VxWorks/WindML20FCS/13506/8BPP/File/udemode.h 1     3/19/01 12:39p Roy $
// $Revision: 1 $
// $Log: /VxWorks/WindML20FCS/13506/8BPP/File/udemode.h $
// 
// 1     3/19/01 12:39p Roy
// Created.
// 
// 1     10/04/00 1:59a Roy
// 
// 1     8/11/00 2:06a Roy
// Created.
// 
//==========================================================================

#define MaxNumInitRegs 110

typedef UGL_UINT32  DWORD;
typedef UGL_UINT16  WORD;
typedef UGL_UINT8   BYTE;
typedef UGL_UINT16  EGPEFormat;


enum EGPEFormat
{
     gpe1Bpp,
     gpe2Bpp,
     gpe4Bpp,
     gpe8Bpp,
     gpe16Bpp,
     gpe24Bpp,
     gpe32Bpp,
     gpe16YCrCb,
     gpeDeviceCompatible,
     gpeUndefined
};



// Declare MHFlags identifiers. This is used to avoid having to 
// traverse/crack the register list.
typedef enum MHFlags
{
   mfLCD            = 0x00000001,   // bit 0:  LCD ON
   mfCRTTV          = 0x00000002,   // bit 1:  CRT or TV ON
   mfTVOUTPUT       = 0x00000004,   // bit 2:  TV ON (else CRT ON)
   mfPAL            = 0x00000008,   // bit 3:  1=PAL 0=NTSC
   mfSVIDEO         = 0x00000010,   // bit 4:  1=S-video 0=Composite
   mfFLICKERFILTER  = 0x00000020,   // bit 5:  0=ON 1=OFF
   mfDC2            = 0x00000100,   // bit 8:  1=AlternateDC active
   mfR90            = 0x00010000,   // bit 16: ( Rotate image clockwise 90 degree )
   mfHWCURSOR       = 0x00020000,   // bit 17: 1=Hardware cursor support
   mfSWCURSOR       = 0x00040000,   // bit 18: 1=Software cursor support
   mfHWBLT          = 0x00080000,   // bit 19: 1=Hardware BLT support
   mfR180           = 0x00100000,   // bit 20: ( Rotate image clockwise 180 degree )
   mfR270           = 0x00200000,   // bit 21: ( Rotate image clockwise 270 degree )
   mfSWEMUL         = 0x00400000    // bit 22: 1=Software emulation support (WinCE)
} MHFlags;



typedef struct ModeHeader
{
    WORD       ModeId;
    WORD       Width;
    WORD       Height;
    WORD       Bpp;
    WORD       Frequency;
    EGPEFormat Format;

    WORD       Version;
    WORD       StridePixels;
    WORD       StrideBytes;
    WORD       PaletteSize;
    DWORD      PhysicalVmemAddr;
    DWORD      PhysicalVmemSize;
    DWORD      PhysicalPortAddr;
    DWORD      PhysicalPortSize;
    DWORD      PhysicalBltAddr;
    DWORD      PhysicalBltSize;
    MHFlags    Flags;

    DWORD      CLKI;
    DWORD      CLKI2;
    WORD       LCDGPIOPowerPin;
    WORD       LCDPowerOffTime;
    WORD       LCDPowerOnTime;

    WORD       Reserved;

    WORD       Width2;
    WORD       Height2;
    WORD       Bpp2;
    WORD       Frequency2;
    WORD       StrideBytes2;
    MHFlags    Flags2;

    BYTE       Filler[36];
} ModeHeader;



typedef struct ModeTable
{
   ModeHeader  ModeInfo;
   WORD        InitEpsonRegs[MaxNumInitRegs][2];
} ModeTable;



ModeTable epsonModeTable[] =
{
   // mode0.h is generated by 13506cfg.exe
   // 13506cfg.exe is available at www.erd.epson.com
   #include "mode0.h"
};