📄 historyg7tow.txt
字号:
g7to Version History:
-------------------------------------------------------------------------------
3.04.32 - Minor bug fixes.
-------------------------------------------------------------------------------
3.04.31 - Fixed a problem which caused 3.04.30 to crash on reading
certain files.
-------------------------------------------------------------------------------
3.04.30 - Fixed a problem which incorrectly set the date on waypoints sent
to LEI units.
-------------------------------------------------------------------------------
3.04.29 - Changed the -i g45g (get PVT) command as follows:
-i g45g -- works as before, i.e. until X or x is pressed
on the keyboard
-i g45gn -- where 'n' is a decimal number will cause g7to/w
to acquire and print 'n' PVT packets.
-------------------------------------------------------------------------------
3.04.28 - Added date.time value to tracks points in Ozi .plt files.
-------------------------------------------------------------------------------
3.04.27 - Minor fix in icon numbers for the Garmin 12 series GPS.
-------------------------------------------------------------------------------
3.04.26 - Released source code.
-------------------------------------------------------------------------------
3.04.25 - Added the ability to read 'version 1' .txt files that
are written in DMS, DMM, DDD or UTM mode. The program
only writes DMM or UTM mode, however.
-------------------------------------------------------------------------------
3.04.24 - More GPS II+ version 3.03 icon fixes.
-------------------------------------------------------------------------------
3.04.23 - GPS II+ version 3.03 icon fixes.
-------------------------------------------------------------------------------
3.04.22 - 12CX icon fixes.
-------------------------------------------------------------------------------
3.04.21 - 12CX proximity waypoint download fixes.
-------------------------------------------------------------------------------
3.04.20 - More 12CX waypoint download fixes.
-------------------------------------------------------------------------------
3.04.19 - End of route wasn't being output to text files when the command
-o output.txt was used.
-------------------------------------------------------------------------------
3.04.18 - More 12CX waypoint upload bug fixes.
-------------------------------------------------------------------------------
3.04.17 - Added command line option -! which will cause the output
waypoints name length to be truncated to 6 chars and the
format in the text file to be
W NAMEXX N44 .... which is the same as the Gardown format.
Added at user request.
-------------------------------------------------------------------------------
3.04.16 - Added .txt files to the '-o' option.
g7to(w) -i xxx -o file.txt will cause the output to go to the
file file.txt rather than the display.
-------------------------------------------------------------------------------
3.04.15 - Added a '-0' option which if scanned on the command line will
cause all times output to .txt files to be Garmin 'zero' time,
i.e. Sun Dec 31 00:00:00 1989. This will facilitate using a
program to check for differences between files.
-------------------------------------------------------------------------------
3.04.14 - Proximity waypoints caused a GPF in g7tow. g7to was ok. Fixed
-------------------------------------------------------------------------------
3.04.13 - Added 12CX code. Color symbols not fully supported yet.
-------------------------------------------------------------------------------
3.04.12 - .wtt output incorrect. Fixed.
-------------------------------------------------------------------------------
3.04.11 - more Minor mod for SP routes
-------------------------------------------------------------------------------
3.04.10 - Minor mod for SP routes
-------------------------------------------------------------------------------
3.04.09 - Fixed a bug introduced in .08 that caused SA icons to be set to
the default icon if the text element was Name;desc
-------------------------------------------------------------------------------
3.04.08 - Modified SA routines to be more in line with G7ToWin.
Documentation will come later.
-------------------------------------------------------------------------------
3.04.07 - Fixed a bug with -q operation.
-------------------------------------------------------------------------------
3.04.06 - All unrecognized lines in a g7to text file are now
treated as comment lines.
Added command line option -k. This command line option
will cause TRACKS in .SA4 or .SA5 or .SA6 files to cycle
colors with each new segment. It does not have an effect
on any other color output.
-8 added to a the command line when downloading tracks to
an SA3 file will place the time on the track point.
g7to(w) -i <trk inputs> -8 -o fname.sa3
-------------------------------------------------------------------------------
3.04.05 - Fixed a sign error in the longitude portion of GPL files.
-------------------------------------------------------------------------------
3.04.04 - Fixed a track upload problem which occurred when the number of
tracks was larger than 750 and the output was to a Garmin GPS.
-------------------------------------------------------------------------------
3.04.03 - Fixed an offset problem when loading LEI routes with the
waypoints offset. Some problems with the GPS III Pilot routes
still exist.
Fixed a problem when the output was to a LEI unit and any
command parameter other than '-o lwr' was used.
-------------------------------------------------------------------------------
3.04.02 - Added GPS III Pilot route upload.
Corrected a problem in reading Navigate .clg files. This error
was introduced in version 3.02.22.
-------------------------------------------------------------------------------
3.04.01 - Fixed a problem downloading Protocol Version 1.0 displays. This
bug was introduced in version 3.03.09.
-------------------------------------------------------------------------------
3.04.00 - g7to.doc is now a WinWord document. The original g7to.doc has
been renamed g7to.txt. In the future g7to.doc will be the
official file and g7to.txt will be removed.
Fixed a bug in reading proximity waypoints from the Garmin units.
Increasing the length of the waypoint name field to 15 characters
has removed the need for the -k command line option which copied
the comment in the waypoint record to the waypoint name field.
This option has been removed.
Changed the comma separated values output to remove the double
quote marks from the elements.
Changed the datum selection parmeter from -U to -Y. -U is now
used to signal output should be UTM.
Added UTM output. This removed the need for having *80* records
output so this function was removed. Control Point records are
no longer output.
Added UTM input.
UTM I/O can only be used with g7to 'text' files and with
.csv files. g7to text files are created by re-directing
the output to a file.
g7to -i g45w -o garmin.csv -u
Will output the data in the .csv file in UTM.
g7to -i g45w -u >garmin.txt
will output the Garmin waypoints to the file garmin.txt in
the UTM format.
The -u parameter may be used it the -y <datum> parameter
to create UTM output in other supported datums:
g7to -i g45w -o garmin.csv -u -y nad27_conus
will create the garmin.csv file with UTM values in the NAD-27
CONUS datum.
Input text files may have the co-ordinants in either UTM or
Lat/Long; however, the format is fixed:
#Wed Dec 16 08:12:36 1998 GMT
D WGS-84
! -t cblack -t wt -t sn
N New Track Start
T N44 30.4296 W123 34.7715 Mon Dec 14 22:46:41 1998
T N44 30.4468 W123 34.7477 Mon Dec 14 22:46:41 1998
! -w coblue -w ctblue -w sovs -w stvs -w ane
I N44 30.8899 W123 33.6013 ; 18;
I N44 30.8899 W123 33.5866 ; 18;
R 03
W 003 N44 30.0000 W123 30.0000 Sun Aug 16 21:16:15 1998 TEST POINT ; 18;2;0
W 126TRN N44 25.2782 W122 00.1112 Sun Aug 16 21:16:15 1998 HWY 20-126 ; 18;2;0
W 1ST-B N44 33.9769 W123 16.0457 Sun Aug 16 21:16:15 1998 FIRST BAPTIST ; 10;2;0
E 03
#Wed Dec 16 08:11:34 1998 GMT
D WGS-84
! -t cblack -t wt -t sn
N New Track Start
T 10T 453934.7 4928367.8 Mon Dec 14 22:46:41 1998
T 10T 453966.5 4928399.5 Mon Dec 14 22:46:41 1998
! -w coblue -w ctblue -w sovs -w stvs -w ane
I 10T 455490.8 4929209.2 ; 18;
I 10T 455510.3 4929209.1 ; 18;
R 03
W 003 10T 460251.1 4927530.7 Sun Aug 16 21:16:15 1998 TEST POINT ; 18;2;0
W 126TRN 10T 579457.2 4919152.2 Sun Aug 16 21:16:15 1998 HWY 20-126 ; 18;2;0
W 1ST-B 10T 478764.2 4934806.4 Sun Aug 16 21:16:15 1998 FIRST BAPTIST ; 10;2;0
E 03
#Wed Dec 16 08:22:21 1998 GMT
D nad27_conus
! -t cblack -t wt -t sn
N New Track Start
T 10T 454028.6 4928172.4 Mon Dec 14 22:46:41 1998
T 10T 454060.4 4928204.1 Mon Dec 14 22:46:41 1998
! -w coblue -w ctblue -w sovs -w stvs -w ane
I 10T 455584.7 4929013.8 ; 18;
I 10T 455604.2 4929013.7 ; 18;
R 03
W 003 10T 460345.0 4927335.3 Sun Aug 16 21:16:15 1998 TEST POINT ; 18;2;0
W 126TRN 10T 579550.8 4918956.8 Sun Aug 16 21:16:15 1998 HWY 20-126 ; 18;2;0
W 1ST-B 10T 478858.0 4934611.0 Sun Aug 16 21:16:15 1998 FIRST BAPTIST ; 10;2;0
E 03
Removed the Proj output record. g7to has datum conversion and
Proj was output to facilitate datum conversion exterior to the
program.
-------------------------------------------------------------------------------
3.03.12 - Existed as a beta, only. Never officially released.
-------------------------------------------------------------------------------
3.03.11 - Fixed a bug which caused new track information to be lost when
output is a .csv file.
Added input of .csv file.
g7to(w) -i file.csv -o file.sa6
will read the .csv file 'file.csv' and output the data therein
into the SA6 file 'file.sa6'.
The only .csv data input which will work is .csv data written in
the .csv format that g7to outputs.
-------------------------------------------------------------------------------
3.03.10 - Increased the number of waypoints allowed in input files to
65500 for g7tow.exe. The number of waypoints allowed in g7to.exe
remains at 750.
Fixed a problem when using the -c Lat -c Long input to center a
.SA file. This bug was in g7tow only.
Modified -q parameter as follows:
-q 0 - all items written
-q 1 - comment not written on regular waypoints
-q 2 - comment not written on route waypoints
-q 4 - the symbol display parameter not written
-q 8 - route name is not written on first route point
added-----> -q 16 - (nn:nn) is not written on the text of route points
in .SAfiles.
The parameter values can be summed to turn off more than
one option. For example -q 9 (the sum of 8 + 1) would
turn off the writing of comments on regular waypoints
and turn off writing the route name on the first route
waypoint
-q 31 will turn off all options and leave only the waypoint
name displayed in routes in SAfiles.
-------------------------------------------------------------------------------
3.03.09 - Fixed a memory allocation problem which could result in a
program crash when downloading EE2 display with g7to(w).
-------------------------------------------------------------------------------
3.03.08 - Fixed a problem when displaying the Lowrance GlobalMap Sport name
string.
Fixed a program 'crash' that could happen when uploading
tracks to an LEI protocol version 1 unit, i.e. the
GlobalMap Sport, with g7tow.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -