📄 configure
字号:
fidonedonefifiAWK=$ac_cv_prog_AWKif test -n "$AWK"; then echo "$as_me:$LINENO: result: $AWK" >&5echo "${ECHO_T}$AWK" >&6else echo "$as_me:$LINENO: result: no" >&5echo "${ECHO_T}no" >&6fi test -n "$AWK" && breakdoneecho "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then echo $ECHO_N "(cached) $ECHO_C" >&6else cat >conftest.make <<\_ACEOFall: @echo 'ac_maketemp="$(MAKE)"'_ACEOF# GNU make sometimes prints "make[1]: Entering...", which would confuse us.eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`if test -n "$ac_maketemp"; then eval ac_cv_prog_make_${ac_make}_set=yeselse eval ac_cv_prog_make_${ac_make}_set=nofirm -f conftest.makefiif eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then echo "$as_me:$LINENO: result: yes" >&5echo "${ECHO_T}yes" >&6 SET_MAKE=else echo "$as_me:$LINENO: result: no" >&5echo "${ECHO_T}no" >&6 SET_MAKE="MAKE=${MAKE-make}"firm -rf .tst 2>/dev/nullmkdir .tst 2>/dev/nullif test -d .tst; then am__leading_dot=.else am__leading_dot=_firmdir .tst 2>/dev/null# test to see if srcdir already configuredif test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} { (exit 1); exit 1; }; }fi# test whether we have cygpathif test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fifi# Define the identity of the package. PACKAGE=dillo VERSION=0.8.6cat >>confdefs.h <<_ACEOF#define PACKAGE "$PACKAGE"_ACEOFcat >>confdefs.h <<_ACEOF#define VERSION "$VERSION"_ACEOF# Some tools Automake needs.ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}install_sh=${install_sh-"$am_aux_dir/install-sh"}# Installed binaries are usually stripped using `strip' when the user# run `make install-strip'. However `strip' might not be the right# tool to use in cross-compilation environments, therefore Automake# will honor the `STRIP' environment variable to overrule this program.if test "$cross_compiling" != no; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.set dummy ${ac_tool_prefix}strip; ac_word=$2echo "$as_me:$LINENO: checking for $ac_word" >&5echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6if test "${ac_cv_prog_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6else if test -n "$STRIP"; then ac_cv_prog_STRIP="$STRIP" # Let the user override the test.elseas_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdo IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_STRIP="${ac_tool_prefix}strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fidonedonefifiSTRIP=$ac_cv_prog_STRIPif test -n "$STRIP"; then echo "$as_me:$LINENO: result: $STRIP" >&5echo "${ECHO_T}$STRIP" >&6else echo "$as_me:$LINENO: result: no" >&5echo "${ECHO_T}no" >&6fifiif test -z "$ac_cv_prog_STRIP"; then ac_ct_STRIP=$STRIP # Extract the first word of "strip", so it can be a program name with args.set dummy strip; ac_word=$2echo "$as_me:$LINENO: checking for $ac_word" >&5echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6else if test -n "$ac_ct_STRIP"; then ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.elseas_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdo IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_STRIP="strip" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fidonedone test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"fifiac_ct_STRIP=$ac_cv_prog_ac_ct_STRIPif test -n "$ac_ct_STRIP"; then echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5echo "${ECHO_T}$ac_ct_STRIP" >&6else echo "$as_me:$LINENO: result: no" >&5echo "${ECHO_T}no" >&6fi STRIP=$ac_ct_STRIPelse STRIP="$ac_cv_prog_STRIP"fifiINSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"# We need awk for the "check" target. The system "awk" is bad on# some platforms.# Always define AMTAR for backward compatibility.AMTAR=${AMTAR-"${am_missing_run}tar"}am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ac_config_headers="$ac_config_headers config.h"# Check whether --with-jpeg-lib or --without-jpeg-lib was given.if test "${with_jpeg_lib+set}" = set; then withval="$with_jpeg_lib" LIBJPEG_LIBDIR=$withvalfi;# Check whether --with-jpeg-inc or --without-jpeg-inc was given.if test "${with_jpeg_inc+set}" = set; then withval="$with_jpeg_inc" LIBJPEG_INCDIR=$withvalfi;# Check whether --enable-efence or --disable-efence was given.if test "${enable_efence+set}" = set; then enableval="$enable_efence"else enable_efence=nofi;# Check whether --enable-gprof or --disable-gprof was given.if test "${enable_gprof+set}" = set; then enableval="$enable_gprof"else enable_gprof=nofi;# Check whether --enable-insure or --disable-insure was given.if test "${enable_insure+set}" = set; then enableval="$enable_insure"else enable_insure=nofi;# Check whether --enable-ansi or --disable-ansi was given.if test "${enable_ansi+set}" = set; then enableval="$enable_ansi"else enable_ansi=nofi;# Check whether --enable-ipv6 or --disable-ipv6 was given.if test "${enable_ipv6+set}" = set; then enableval="$enable_ipv6"fi;# Check whether --enable-rtfl or --disable-rtfl was given.if test "${enable_rtfl+set}" = set; then enableval="$enable_rtfl" enable_rtfl=yesfi;# Check whether --enable-cookies or --disable-cookies was given.if test "${enable_cookies+set}" = set; then enableval="$enable_cookies"else enable_cookies=yesfi;# Check whether --enable-png or --disable-png was given.if test "${enable_png+set}" = set; then enableval="$enable_png" enable_png=$enablevalelse enable_png=yesfi;# Check whether --enable-jpeg or --disable-jpeg was given.if test "${enable_jpeg+set}" = set; then enableval="$enable_jpeg" enable_jpeg=$enablevalelse enable_jpeg=yesfi;# Check whether --enable-gif or --disable-gif was given.if test "${enable_gif+set}" = set; then enableval="$enable_gif" enable_gif=$enablevalelse enable_gif=yesfi;# Check whether --enable-ssl or --disable-ssl was given.if test "${enable_ssl+set}" = set; then enableval="$enable_ssl" enable_ssl=$enablevalelse enable_ssl=yesfi;# Check whether --enable-dlgui or --disable-dlgui was given.if test "${enable_dlgui+set}" = set; then enableval="$enable_dlgui" enable_dlgui=$enablevalelse enable_dlgui=yesfi;# Check whether --enable-threaded-dns or --disable-threaded-dns was given.if test "${enable_threaded_dns+set}" = set; then enableval="$enable_threaded_dns" enable_threaded_dns=$enablevalelse enable_threaded_dns=yesfi;if test x$enable_dlgui = xyes; then DLGUI_TRUE= DLGUI_FALSE='#'else DLGUI_TRUE='#' DLGUI_FALSE=fiac_ext=cac_cpp='$CPP $CPPFLAGS'ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'ac_compiler_gnu=$ac_cv_c_compiler_gnuif test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.set dummy ${ac_tool_prefix}gcc; ac_word=$2echo "$as_me:$LINENO: checking for $ac_word" >&5echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6if test "${ac_cv_prog_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test.elseas_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdo IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_CC="${ac_tool_prefix}gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fidonedonefifiCC=$ac_cv_prog_CCif test -n "$CC"; then echo "$as_me:$LINENO: result: $CC" >&5echo "${ECHO_T}$CC" >&6else echo "$as_me:$LINENO: result: no" >&5echo "${ECHO_T}no" >&6fifiif test -z "$ac_cv_prog_CC"; then ac_ct_CC=$CC # Extract the first word of "gcc", so it can be a program name with args.set dummy gcc; ac_word=$2echo "$as_me:$LINENO: checking for $ac_word" >&5echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6if test "${ac_cv_prog_ac_ct_CC+set}" = set; then echo $ECHO_N "(cached) $ECHO_C" >&6else if test -n "$ac_ct_CC"; then ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.elseas_save_IFS=$IFS; IFS=$PATH_SEPARATORfor as_dir in $PATHdo IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for ac_exec_ext in '' $ac_executable_extensions; do if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ac_cv_prog_ac_ct_CC="gcc" echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 break 2 fidonedonefifiac_ct_CC=$ac_cv_prog_ac_ct_CCif test -n "$ac_ct_CC"; then echo "$as_me:$LINENO: result: $ac_ct_CC" >&5echo "${ECHO_T}$ac_ct_CC" >&6else echo "$as_me:$LINENO: result: no" >&5echo "${ECHO_T}no" >&6fi CC=$ac_ct_CCelse CC="$ac_cv_prog_CC"fiif test -z "$CC"; then if test -n "$ac_tool_prefix"; then # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.set dummy ${ac_tool_prefix}cc; ac_word=$2echo "$as_me:
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -