adsp-bf533_i2c_support.mak

ADI BLACKFIN BF533 的IIC驱动程序

# Generated by the VisualDSP++ IDDE

# Note:  Any changes made to this Makefile will be lost the next time the
# matching project file is loaded into the IDDE.  If you wish to preserve
# changes, rename this file and run it externally to the IDDE.

# The syntax of this Makefile is such that GNU Make v3.77 or higher is
# required.

# The current working directory should be the directory in which this
# Makefile resides.

# Supported targets:
#     ADSP-BF533_I2C_Support_Debug
#     ADSP-BF533_I2C_Support_Debug_clean

# Define this variable if you wish to run this Makefile on a host
# other than the host that created it and VisualDSP++ may be installed
# in a different directory.

ADI_DSP=C:\Program Files\Analog Devices\VisualDSP 4.5


# $VDSP is a gmake-friendly version of ADI_DIR

empty:=
space:= $(empty) $(empty)
VDSP_INTERMEDIATE=$(subst \,/,$(ADI_DSP))
VDSP=$(subst $(space),\$(space),$(VDSP_INTERMEDIATE))

RM=cmd /C del /F /Q

#
# Begin "ADSP-BF533_I2C_Support_Debug" configuration
#

ifeq ($(MAKECMDGOALS),ADSP-BF533_I2C_Support_Debug)

ADSP-BF533_I2C_Support_Debug : ./Debug/ADSP-BF533_I2C_Support.dxe 

./Debug/ADSP-BF533_I2C_Support_basiccrt.doj :./ADSP-BF533_I2C_Support_basiccrt.s $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h $(VDSP)/Blackfin/include/sys/_adi_platform.h $(VDSP)/Blackfin/include/sys/anomaly_macros_rtl.h $(VDSP)/Blackfin/include/sys/platform.h 
	@echo ".\ADSP-BF533_I2C_Support_basiccrt.s"
	$(VDSP)/easmblkfn.exe .\ADSP-BF533_I2C_Support_basiccrt.s -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\ADSP-BF533_I2C_Support_basiccrt.doj -MM

./Debug/BF533_EZ-KIT_ADV7183_Config.doj :./BF533_EZ-KIT_ADV7183_Config.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_ADV7183_Config.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_ADV7183_Config.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_ADV7183_Config.doj -MM

./Debug/BF533_EZ-KIT_DMA_Config.doj :./BF533_EZ-KIT_DMA_Config.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_DMA_Config.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_DMA_Config.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_DMA_Config.doj -MM

./Debug/BF533_EZ-KIT_flash_setup.doj :./BF533_EZ-KIT_flash_setup.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_flash_setup.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_flash_setup.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_flash_setup.doj -MM

./Debug/BF533_EZ-KIT_ISR.doj :./BF533_EZ-KIT_ISR.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_ISR.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_ISR.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_ISR.doj -MM

./Debug/BF533_EZ-KIT_ISR_Config.doj :./BF533_EZ-KIT_ISR_Config.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_ISR_Config.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_ISR_Config.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_ISR_Config.doj -MM

./Debug/BF533_EZ-KIT_Omnivision_Config.doj :./BF533_EZ-KIT_Omnivision_Config.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_Omnivision_Config.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_Omnivision_Config.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_Omnivision_Config.doj -MM

./Debug/BF533_EZ-KIT_PPI_Config.doj :./BF533_EZ-KIT_PPI_Config.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_PPI_Config.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_PPI_Config.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_PPI_Config.doj -MM

./Debug/BF533_EZ-KIT_SDRAM_Config.doj :./BF533_EZ-KIT_SDRAM_Config.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF533_EZ-KIT_SDRAM_Config.asm"
	$(VDSP)/easmblkfn.exe .\BF533_EZ-KIT_SDRAM_Config.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF533_EZ-KIT_SDRAM_Config.doj -MM

./Debug/BF53xSCCB_Interface.doj :./BF53xSCCB_Interface.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\BF53xSCCB_Interface.asm"
	$(VDSP)/easmblkfn.exe .\BF53xSCCB_Interface.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\BF53xSCCB_Interface.doj -MM

./Debug/Main.doj :./Main.asm $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/defBF533.h $(VDSP)/Blackfin/include/def_LPBlackfin.h 
	@echo ".\Main.asm"
	$(VDSP)/easmblkfn.exe .\Main.asm -proc ADSP-BF533 -g -si-revision 0.4 -o .\Debug\Main.doj -MM

./Debug/ADSP-BF533_I2C_Support.dxe :$(VDSP)/Blackfin/ldf/ADSP-BF533.ldf ./Debug/ADSP-BF533_I2C_Support_basiccrt.doj ./Debug/BF533_EZ-KIT_ADV7183_Config.doj ./Debug/BF533_EZ-KIT_DMA_Config.doj ./Debug/BF533_EZ-KIT_flash_setup.doj ./Debug/BF533_EZ-KIT_ISR.doj ./Debug/BF533_EZ-KIT_ISR_Config.doj ./Debug/BF533_EZ-KIT_Omnivision_Config.doj ./Debug/BF533_EZ-KIT_PPI_Config.doj ./Debug/BF533_EZ-KIT_SDRAM_Config.doj ./Debug/BF53xSCCB_Interface.doj ./Debug/Main.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/__initsbsz532.doj $(VDSP)/Blackfin/lib/cplbtab533.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/crtn532y.doj $(VDSP)/Blackfin/lib/bf532_rev_0.3/libsmall532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libio532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libc532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/librt_fileio532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libevent532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libcpp532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libcpprt532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libx532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libf64ieee532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libdsp532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libsftflt532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libetsi532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/Debug/libssl532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/Debug/libdrv532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.3/libprofile532y.dlb 
	@echo "Linking..."
	$(VDSP)/ccblkfn.exe .\Debug\ADSP-BF533_I2C_Support_basiccrt.doj .\Debug\BF533_EZ-KIT_ADV7183_Config.doj .\Debug\BF533_EZ-KIT_DMA_Config.doj .\Debug\BF533_EZ-KIT_flash_setup.doj .\Debug\BF533_EZ-KIT_ISR.doj .\Debug\BF533_EZ-KIT_ISR_Config.doj .\Debug\BF533_EZ-KIT_Omnivision_Config.doj .\Debug\BF533_EZ-KIT_PPI_Config.doj .\Debug\BF533_EZ-KIT_SDRAM_Config.doj .\Debug\BF53xSCCB_Interface.doj .\Debug\Main.doj -L .\Debug -flags-link -MDUSE_FILEIO,-MDUSER_CRT=ADI_QUOTEADSP-BF533_I2C_Support_basiccrt.dojADI_QUOTE -add-debug-libpaths -flags-link -od,.\Debug -o .\Debug\ADSP-BF533_I2C_Support.dxe -proc ADSP-BF533 -si-revision 0.4 -MM

endif

ifeq ($(MAKECMDGOALS),ADSP-BF533_I2C_Support_Debug_clean)

ADSP-BF533_I2C_Support_Debug_clean:
	-$(RM) ".\Debug\ADSP-BF533_I2C_Support_basiccrt.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_ADV7183_Config.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_DMA_Config.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_flash_setup.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_ISR.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_ISR_Config.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_Omnivision_Config.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_PPI_Config.doj"
	-$(RM) ".\Debug\BF533_EZ-KIT_SDRAM_Config.doj"
	-$(RM) ".\Debug\BF53xSCCB_Interface.doj"
	-$(RM) ".\Debug\Main.doj"
	-$(RM) ".\Debug\ADSP-BF533_I2C_Support.dxe"
	-$(RM) ".\Debug\*.ipa"
	-$(RM) ".\Debug\*.opa"
	-$(RM) ".\Debug\*.ti"
	-$(RM) ".\*.rbld"

endif