usbhost.opt

ms51 控制sl811读写u盘的源程序 及 原理图 可仿真试一下

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.a*; *.src)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt)
 pExt (*.plm)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,67108864,0,312,312,0,<.\TPBULK.C><TPBULK.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,161,1,0,0,38,1,0,0,66,3,0,0,185,1,0,0 }
OPTFFF 1,2,1,536870912,0,9,23,0,<.\HAL.C><HAL.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,61,0,0,0,82,0,0,0,251,2,0,0,137,1,0,0 }
OPTFFF 1,3,1,385875968,0,262,262,0,<.\HPI.C><HPI.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,161,1,0,0,147,0,0,0,66,3,0,0,38,1,0,0 }
OPTFFF 1,4,1,855638016,0,86,86,0,<.\ISR.C><ISR.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,0,0,0,0,0,0,0,0,161,1,0,0,147,0,0,0 }
OPTFFF 1,5,1,251658240,0,59,59,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,161,1,0,0,0,0,0,0,66,3,0,0,147,0,0,0 }
OPTFFF 1,6,1,134217728,0,330,330,0,<.\SL811.C><SL811.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,0,0,0,0,38,1,0,0,161,1,0,0,185,1,0,0 }
OPTFFF 1,7,1,402653186,0,231,241,0,<.\Fat.c><Fat.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,3,0,0,0,141,0,0,0,164,1,0,0,32,1,0,0 }


TARGOPT 1, (Target 1)
 CLK51=40000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\WINBOND\W78E54b.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\Infineon\M500.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52W)(S8051.DLL)()(TP51.DLL)(-p52W)
  OPTDBG 509,0,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(5011=-1,-1,-1,-1,0)(3003=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(93=-1,-1,-1,-1,0)(2004=-1,-1,-1,-1,0))
  OPTDF 0x80
  OPTLE <>
  OPTLC <>
EndOpt