msp430x20x3_ta_01.s43

MSP430F20xx的汇编程序示例

;*******************************************************************************
;   MSP430F20xx Demo - Timer_A, Toggle P1.0, CCR0 Cont. Mode ISR, DCO SMCLK
;
;   Description: Toggle P1.0 using software and TA_0 ISR. Toggles every
;   50000 SMCLK cycles. SMCLK provides clock source for TACLK.
;   During the TA_0 ISR, P1.0 is toggled and 50000 clock cycles are added to
;   CCR0. TA_0 ISR is triggered every 50000 cycles. CPU is normally off and
;   used only during TA_ISR.
;   ACLK = n/a, MCLK = SMCLK = TACLK = default DCO
;
;                MSP430F20xx
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;   M. Buccini / L. Westlund
;   Texas Instruments Inc.
;   October 2005
;   Built with IAR Embedded Workbench Version: 3.40A
;*******************************************************************************
#include  "msp430x20x3.h"
;-------------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-------------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
SetupC0     mov.w   #CCIE,&CCTL0            ; CCR0 interrupt enabled
            mov.w   #50000,&CCR0            ;
SetupTA     mov.w   #TASSEL_2+MC_2,&TACTL   ; SMCLK, contmode
                                            ;						
Mainloop    bis.w   #CPUOFF+GIE,SR          ; CPU off, interrupts enabled
            nop                             ; Required only for debugger
                                            ;
;-------------------------------------------------------------------------------
TA0_ISR;    Toggle P1.0
;-------------------------------------------------------------------------------
            xor.b   #001h,&P1OUT            ; Toggle P1.0
            add.w   #50000,&CCR0            ; Add Offset to CCR0
            reti                            ;		
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFF2h                  ; Timer_A0 Vector
            DW      TA0_ISR                 ;
            END