330_gobale.h

C8051F330部分模块程序,已经调试成功

			/****************************************
 *文件名: A601inc.h                     *
 *被使用文件 :/d/刘玉龙/A601/A601.c     * 
 *			/d/刘玉龙/A601/keyboard.c   *
 *			/d/刘玉龙/A601/flap.c       *
 *			/d/刘玉龙/A601/display.c    *
 *			/d/刘玉龙/A601/control.c    *
 *作者: 刘玉龙                          *  
 *日期: 2006-4-21                       *
 ****************************************/
struct keyboard out;
//程序中的部分缓冲结构体变量；主要是和显示有关的变量；
struct screen setdata;
//电路输出量以及整个程序的部分缓冲；

unsigned char code lcdtenmap[12][8]={{1,1,1,0,1,0,1,1},{0,1,1,0,0,0,0,0},{1,1,0,0,0,1,1,1},{1,1,1,0,0,1,0,1},{0,1,1,0,1,1,0,0},{1,0,1,0,1,1,0,1},{1,0,1,0,1,1,1,1},{1,1,1,0,0,0,0,0},{1,1,1,0,1,1,1,1},{1,1,1,0,1,1,0,1},{1,0,0,0,1,1,1,0},{0,0,0,0,0,0,0,0}};
//温度十位的显示数据；
unsigned char code lcdonemap[11][7]={{1,1,1,1,0,1,1},{0,1,1,0,0,0,0},{1,1,0,0,1,1,1},{1,1,1,0,1,0,1},{0,1,1,1,1,0,0},{1,0,1,1,1,0,1},{1,0,1,1,1,1,1},{1,1,1,0,0,0,0},{1,1,1,1,1,1,1},{1,1,1,1,1,0,1},{1,1,1,1,0,1,1}};
//温度个位的显示数据；
unsigned char code openlcdnum[5][12]={{1,0,0,0,0,0,0,0,0,0,1,1},{1,0,0,0,0,0,0,0,0,1,1,1},{1,0,0,0,0,1,0,1,0,1,1,1},{1,0,0,0,0,0,0,0,0,1,0,1},{1,0,0,0,0,0,0,0,0,0,0,1}};
//设置LCD的相关参数表；
#define tempmax 36      
#define tempmin 10
//温度范围设置；16~36；
#define speedmax 10
#define speedmin 0
//占空比设置范围，0~100%；5代表50%；
#define flap_int_num 0x0a
//风门初始的角度；10为90度；具体是代表多少要看安装的方向；
#define hot_int_num 0    
//加热丝的初始值为不加热 ；
#define wind_int_speed 10
//风速初始值设置，数字代表成数，例如：5就是50%；
#define temp_int_num 16
//温度设置的初始值为26；
#define mobleaddr 0x14 
//模块地址；
#define true 1
#define false 0
#define openflap 0
#define closeflap 1
unsigned xdata first;
unsigned xdata lastsetuptemp;
unsigned xdata lastsetupwind;
unsigned xdata lastsetupflap;
unsigned xdata lastsetupmode;
unsigned xdata lastsetupaddr;
unsigned int temp;
//温度的转换变量以及风门可调电阻的转换变量；AD的缓冲变量；
xdata unsigned char screenkeep;
sbit lcddata=p1^0;
sbit lcdwr=p1^1;
sbit lcdcs=p1^2;
sbit led=p1^3;
sbit mode = p1^4;
sbit increase = p1^5;
sbit reduce = p1^6;
sbit power = p1^7;  
//交流电压上升沿检测口；
bit powersize=1;
//sbit hot = p2^4;
sbit top_size = p0^0;
sbit battom_size = p0^2;	//p2^6
sbit battom = p0^7 ;
sbit top = p0^6 ;
sbit PCA_PWM = p0^1 ;