fet430_fll02.c

来自「msp430F435做的医疗器械,包括语音模块,知识源于网络」· C语言 代码 · 共 38 行

//******************************************************************************
//  MSP-FET430P430 Demo - FLL+ clock, runs internal DCO at 8Mhz
//
//  Description: This program demostrates setting the internalDCO to run at 
//  8Mhz with auto-calibration by the FLL+. 
//  ACLK = LFXT1 = 32768, MCLK = SMCLK = DCOCLK = (n+1) x 2 x ACLK 
//  //*An external watch crystal is required on XIN/XOUT for ACLK*//	  
//
//                 MSP430FG439
//             -----------------
//         /|\|              XIN|-  
//          | |                 | 32kHz
//          --|RST          XOUT|-                                       
//            |                 |
//            |             P1.1|--> MCLK = 8Mhz
//            |                 |
//            |             P1.5|--> ACLK = 32kHz
//            |                 |
//
//  M. Buccini
//  Texas Instruments Inc.
//  June 2004
//  Built with IAR Embedded Workbench Version: 2.21B
//******************************************************************************
#include "msp430xG43x.h"

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;       // stop watchdog timer
  SCFI0 |= FN_4;                  // x2 DCO frequency, 8MHz nominal DCO  
  SCFQCTL = 121;                  // (121+1) x 32768 x 2 = 7.99 Mhz
  FLL_CTL0 |= DCOPLUS + XCAP18PF; // DCO+ set so freq = xtal x D x N+1
  P1DIR = 0x22;                   // P1.1 & P1.5 to output direction
  P1SEL = 0x22;                   // P1.1 & P1.5 to output MCLK & ACLK
  
  while(1);                       // loop in place
}