ieee802dot11mib.mib

vworks 下wlan的实现代码

-- **********************************************************************
-- * IEEE 802.11 Management Information Base
-- **********************************************************************
IEEE802dot11-MIB DEFINITIONS ::= BEGIN
    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, 
        NOTIFICATION-TYPE,Unsigned32, Integer32, Counter32  FROM SNMPv2-SMI
        DisplayString , MacAddress, RowStatus,
        TruthValue                              FROM SNMPv2-TC
        MODULE-COMPLIANCE, OBJECT-GROUP, 
        NOTIFICATION-GROUP                      FROM SNMPv2-CONF 
        ifIndex                                 FROM RFC1213-MIB;

-- **********************************************************************
-- *  MODULE IDENTITY
-- **********************************************************************
    ieee802dot11 MODULE-IDENTITY
    LAST-UPDATED "9807080000Z"
    ORGANIZATION "IEEE 802.11"
    CONTACT-INFO 
           "WG E-mail: [e-mail]

                Chair: Vic Hayes
               Postal: Lucent Technologies, Inc.
                       Zadelstede 1-10
                       Nieuwegein, Netherlands
                       3431 JZ
                  Tel: [phone]
                  Fax: [phone]
               E-mail: [e-mail]

               Editor: Bob O'Hara
               Postal: Informed Technology, Inc.
                       1750 Nantucket Circle, Suite 138
                       Santa Clara, CA 95054 USA
                  Tel: [phone]
                  Fax: [phone]
               E-mail: [e-mail]"
    DESCRIPTION
        "The MIB module for IEEE 802.11 entities.
        iso(1).member-body(2).us(840).ieee802dot11(10036)"
    ::= { 1 2 840 10036 }

-- **********************************************************************
-- *  Major sections
-- **********************************************************************
--  Station ManagemenT (SMT) Attributes
    --  DEFINED AS "The SMT object class provides the necessary support at the
    --  station to manage the processes in the station such that the
    --  station may work cooperatively as a part of an IEEE 802.11 network.";

    dot11smt OBJECT IDENTIFIER ::=   {ieee802dot11 1}

      --  dot11smt GROUPS
      --  dot11StationConfigTable            ::= {dot11smt 1}
      --  dot11AuthenticationAlgorithmsTable ::= {dot11smt 2}
      --  dot11WEPDefaultKeysTable           ::= {dot11smt 3}
      --  dot11WEPKeyMappingsTable           ::= {dot11smt 4}
      --  dot11PrivacyTable                  ::= {dot11smt 5}
      --  dot11SMTnotification               ::= {dot11smt 6}

--  MAC Attributes
    --  DEFINED AS "The MAC object class provides the necessary support
    --  for the access control, generation, and verification of frame check
    --  sequences, and proper delivery of valid data to upper layers.";

    dot11mac OBJECT IDENTIFIER ::=   {ieee802dot11 2}

      --  MAC GROUPS
      --  reference IEEE Std 802.1f-1993
         --  dot11OperationTable   	::=    {dot11mac 1}
         --  dot11CountersTable    	::=    {dot11mac 2}
         --  dot11GroupAddressesTable 	::=    {dot11mac 3}

--  Resource Type ID
      dot11res OBJECT IDENTIFIER 		::=   {ieee802dot11 3}
      dot11resAttribute OBJECT IDENTIFIER 	::=   {dot11res 1 }

--  PHY Attributes
    --  DEFINED AS "The PHY object class provides the necessary support
    --  for required PHY operational information that may vary from PHY
    --  to PHY and from STA to STA to be communicated to upper layers."

   dot11phy OBJECT IDENTIFIER ::=   {ieee802dot11 4}

    --  phy GROUPS
    --  dot11PhyOperationTable    	::=  {dot11phy 1}
--  dot11PhyAntennaTable      		::=  {dot11phy 2}
    --  dot11PhyTxPowerTable      	::=  {dot11phy 3}
    --  dot11PhyFHSSTable         	::=  {dot11phy 4}
    --  dot11PhyDSSSTable         	::=  {dot11phy 5}
    --  dot11PhyIRTable           	::=  {dot11phy 6}
    --  dot11RegDomainsSupportedTable   ::=  {dot11phy 7}
    --  dot11AntennasListTable          ::=  {dot11phy 8}
    --  dot11SupportedDataRatesTxTable  ::=  {dot11phy 9}
    --  dot11SupportedDataRatesRxTable  ::=  {dot11phy 10}


-- **********************************************************************
-- *  Textual conventions from 802 definitions
-- **********************************************************************
    WEPKeytype ::= OCTET STRING (SIZE (5))

-- **********************************************************************
-- *  MIB attribute OBJECT-TYPE definitions follow
-- **********************************************************************

-- **********************************************************************
-- *  SMT Station Config  Table
-- **********************************************************************
dot11StationConfigTable OBJECT-TYPE
        SYNTAX SEQUENCE OF Dot11StationConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION
            "Station Configuration attributes.  In tablular form to
            allow for multiple instances on an agent."
    ::= {  dot11smt 1 }

dot11StationConfigEntry OBJECT-TYPE
        SYNTAX Dot11StationConfigEntry
        MAX-ACCESS not-accessible
        STATUS current
        DESCRIPTION

            "An entry in the dot11StationConfigTable.  It is
            possible for there to be multiple IEEE 802.11 interfaces
            on one agent, each with its unique MAC address. The
            relationship between an IEEE 802.11 interface and an
            interface in the context of the Internet-standard MIB is
            one-to-one.  As such, the value of an ifIndex object
            instance can be directly used to identify corresponding
            instances of the objects defined herein.  

            ifIndex - Each 802.11 interface is represented by an
            ifEntry.  Interface tables in this MIB module are indexed
            by ifIndex."


        INDEX {ifIndex}
    ::= {  dot11StationConfigTable 1 }

Dot11StationConfigEntry ::=
        SEQUENCE {
         	dot11StationID                     MacAddress,
             	dot11MediumOccupancyLimit          INTEGER,
             	dot11CFPollable                    TruthValue,
             	dot11CFPPeriod                     INTEGER, 
             	dot11CFPMaxDuration                INTEGER,
             	dot11AuthenticationResponseTimeOut Unsigned32,
             	dot11PrivacyOptionImplemented      TruthValue,
		dot11PowerManagementMode	   INTEGER,
		dot11DesiredSSID		   OCTET STRING,
		dot11DesiredBSSType		   INTEGER,
		dot11OperationalRateSet		   OCTET STRING,
		dot11BeaconPeriod		   INTEGER,
		dot11DTIMPeriod			   INTEGER,
		dot11AssociationResponseTimeOut	   Unsigned32,
             	dot11DisassociateReason            INTEGER,
             	dot11DisassociateStation           MacAddress,
             	dot11DeauthenticateReason          INTEGER,
             	dot11DeauthenticateStation         MacAddress,
             	dot11AuthenticateFailStatus        INTEGER,
             	dot11AuthenticateFailStation       MacAddress }

dot11StationID OBJECT-TYPE
        SYNTAX MacAddress
        MAX-ACCESS read-write
        STATUS deprecated
        DESCRIPTION

            "The purpose of dot11StationID is to allow a manager to identify
            a station for its own purposes.  This attribute provides
            for that eventuality while keeping the true MAC address
            independent.  Its syntax is MAC address and default value
            is the station's assigned, unique MAC address."

    ::= { dot11StationConfigEntry 1 }

dot11MediumOccupancyLimit OBJECT-TYPE
        SYNTAX INTEGER (0..1000)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION

            "This attribute shall indicate the maximum amount of time,
            in TU, that a point coordinator may control the usage of
            the wireless medium without relinquishing control for long
            enough to allow at least one instance of DCF access to the
            medium.  The default value of this attribute shall be 100,
            and the maximum value shall be 1000."

    ::= { dot11StationConfigEntry 2 }

dot11CFPollable OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

        "When this attribute is true, it shall indicate that the STA
        is able to respond to a CF-Poll with a data frame within a
        SIFS time. This attribute shall be false if the STA is not
        able to respond to a CF-Poll with a data frame within a SIFS
        time."

    ::= { dot11StationConfigEntry 3 }

dot11CFPPeriod OBJECT-TYPE
        SYNTAX INTEGER (0..255)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION

            "The attribute shall describe the number of DTIM intervals
            between the start of CFPs.  It is modified by
            MLME-START.request primitive."

::= {  dot11StationConfigEntry 4 }

dot11CFPMaxDuration OBJECT-TYPE
        SYNTAX INTEGER (0..65535)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION

        "The attribute shall describe the maximum duration of the CFP
        in TU that may be generated by the PCF. It is modified by
        MLME-START.request primitive."

::= {  dot11StationConfigEntry 5 }

dot11AuthenticationResponseTimeOut OBJECT-TYPE
        SYNTAX Unsigned32 (1..4294967295)
        MAX-ACCESS read-write
        STATUS current
        DESCRIPTION

            "This attribute shall specify the number of TU that a
            responding STA should wait for the next frame in the
            authentication sequence."

    ::= {  dot11StationConfigEntry 6 }

dot11PrivacyOptionImplemented OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

            "This attribute, when true, shall indicate that the IEEE
             802.11 WEP option is implemented.  The default value of
             this attribute shall be false."

    ::= {  dot11StationConfigEntry 7 }

dot11PowerManagementMode OBJECT-TYPE
		SYNTAX INTEGER { active(1), powersave(2) }
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute shall specify the power management
			 mode of the STA. When set to active, it shall indicate
			 that the station is not in power-save mode. When set
			 to powersave, it shall indicate that the station is
			 in power-save mode. The power management mode is
			 transmitted in all frames according to the rules
			 in  7.1.3.1.7."
	::= { dot11StationConfigEntry 8 }

dot11DesiredSSID OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE(0..32))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute reflects the Service Set ID used
			in the DesiredSSID parameter of the most recent
			MLME_Scan.request.  This value may be modified
			by an external management entity and used by the
			local SME to make decisions about the Scanning process."
	::= { dot11StationConfigEntry 9 }

dot11DesiredBSSType OBJECT-TYPE
		SYNTAX INTEGER { infrastructure(1), independent(2), any(3) }
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute shall specify the type of BSS the
			 station shall use when scanning for a BSS with which
			 to synchronize. This value is used to filter Probe
			 Response frames and Beacons. When set to infrastructure,
			 the station shall only synchronize with a BSS whose
			 Capability Information field has the ESS subfield set
			 to 1. When set to independent, the station shall only
			 synchronize with a BSS whose Capability Information
			 field has the IBSS subfield set to 1. When set to
			 any, the station may synchronize to either type of
			 BSS."
	::= { dot11StationConfigEntry 10 }

dot11OperationalRateSet OBJECT-TYPE
		SYNTAX OCTET STRING (SIZE(1..126))
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute shall specify the set of data rates
			 at which the station may transmit data.  Each octet
 contains a value representing a rate.  Each rate
			 shall be within the range from 2 to 127,
			 corresponding to data rates in increments of
			 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be
			 supported (as indicated in the supported rates
			 table) for receiving data. This value is reported in
			 transmitted Beacon, Probe Request, Probe Response,
			 Association Request, Association Response,
			 Reassociation Request, and Reassociation Response
			 frames, and is used to determine whether a BSS
			 with which the station desires to synchronize is
			 suitable. It is also used when starting a BSS,
			 as specified in  10.3."
	::= { dot11StationConfigEntry 11 }

dot11BeaconPeriod OBJECT-TYPE
		SYNTAX INTEGER (1..65535)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute shall specify the number of TU that a
			 station shall use for scheduling Beacon transmissions.
			 This value is transmitted in Beacon and Probe Response
			 frames."
	::= { dot11StationConfigEntry 12 }

dot11DTIMPeriod OBJECT-TYPE
		SYNTAX INTEGER(1..255)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute shall specify the number of beacon
			 intervals that shall elapse between transmission of
			 Beacons frames containing a TIM element whose DTIM
			 Count field is 0. This value is transmitted in
			 the DTIM Period field of Beacon frames."
	::= { dot11StationConfigEntry 13 }

dot11AssociationResponseTimeOut OBJECT-TYPE
		SYNTAX Unsigned32(1..4294967295)
		MAX-ACCESS read-write
		STATUS current
		DESCRIPTION
			"This attribute shall specify the number of TU that a
			 requesting STA should wait for a response to a
			 transmitted association-request MMPDU."
	::= { dot11StationConfigEntry 14 }

dot11DisassociateReason OBJECT-TYPE
		SYNTAX INTEGER(0..65535)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"This attribute holds the most recently
			transmitted Reason Code in a Disassociation
			frame.  If no Disassociation frame has been
			transmitted, the value of this attribute shall