client99se.rcs

Protel99SE 全部汉化包-SP6-CH

          MenuItem '机械层(&M)'  'PCB:EditInternalPlanes(Mechanical=True)'
          MenuItem '类(&C)...'  PCB:EditClasses
          MenuItem 'From-To 编辑器(&F)'  PCB:EditFromTo
          MenuItem SEPARATOR
          MenuItem '浏览元件(&B)'  PCB:LibraryBrowse
          MenuItem '添加/移去元件库(&L)'  PCB:AddRemoveLibraryInPCBEditor
          MenuItem '生成库'  MakeLib:BuildPCBLibrary
          MenuItem '光圈库(&A)'  PCB:ApertureLibrary
          MenuItem SEPARATOR
          MenuItem '选项(&O)'  PCB:DocumentPreferences
     End
     Popup '工具(&T) {T}'
     Begin
          MenuItem '设计规则检查(&D)...'  PCB:DesignRuleCheck
          MenuItem '清除错误标记(&M)'  PCB:ResetAllErrorMarkers
          MenuItem SEPARATOR
          Popup '自动布局(&L)'
          Begin
               MenuItem '自动布局器(&A)'  AutoPlacer:RunAutoPlacer
               MenuItem '停止自动布局(&S)'  AutoPlacer:StopAutoPlacer
               MenuItem SEPARATOR
               MenuItem '推挤(&S)'  PCB:ShoveComponents
               MenuItem '设置推挤深度(&D)'  'PCB:ShoveComponents(Method = SetShoveDepth)'
               MenuItem '从文件布局(&F)'  PCB:PlaceComponentsFromFile
          End
          Popup '交互布局(&I){I}'
          Begin
               MenuItem '排齐(&A)...'  'PCB:AlignComponents($Description=Run align components dialog)'
               MenuItem SEPARATOR
               MenuItem '左排齐(&L)'  'PCB:AlignComponents(Alignment=Left|$Description=Align left edges of selected components)'
               MenuItem '右排齐(&R)'  'PCB:AlignComponents(Alignment=Right|$Description=Align right edges of selected components)'
               MenuItem '顶部排齐(&T)'  'PCB:AlignComponents(Alignment=Top|$Description=Align tops of selected components)'
               MenuItem '底部排齐(&B)'  'PCB:AlignComponents(Alignment=Bottom|$Description=Align bottoms of selected components)'
               MenuItem '水平中心(&C)'  'PCB:AlignComponents(Alignment=CenterHorizontal|$Description=Align horizontal centers of selected components)'
               MenuItem '垂直中心(&E)'  'PCB:AlignComponents(Alignment=CenterVertical|$Description=Align vertical centers of selected components)'
               MenuItem SEPARATOR
               Popup '水平间距(&H)'
               Begin
                    MenuItem '等间距(&E)'  'PCB:AlignComponents(Alignment=SpreadHorizontal|$Description=Make horizontal spacing of selected components equal)'
                    MenuItem '增大(&I)'  'PCB:AlignComponents(Alignment=ExpandHorizontal|$Description=Increase horizontal spacing of selected components)'
                    MenuItem '减小(&D)'  'PCB:AlignComponents(Alignment=ContractHorizontal|$Description=Decrease horizontal spacing of selected components)'
               End
               Popup '垂直间距(&V)'
               Begin
                    MenuItem '等间距(&E)'  'PCB:AlignComponents(Alignment=SpreadVertical|$Description=Make vertical spacing of selected components equal)'
                    MenuItem '增大(&I)'  'PCB:AlignComponents(Alignment=ExpandVertical|$Description=Increase vertical spacing of selected components)'
                    MenuItem '减小(&D)'  'PCB:AlignComponents(Alignment=ContractVertical|$Description=Decrease vertical spacing of selected components)'
               End
               MenuItem SEPARATOR
               MenuItem 'Room内部排列(&R)'  'PCB:ArrangeComponents(Action=ArrangeWithinRoom|$Description=Arrange components within room)'
               MenuItem '矩形内部排列(&L)'  'PCB:ArrangeComponents(Action=ArrangeWithinRectangle|$Description=Arrange selected components within defined area)'
               MenuItem '板外部排列(&O)'  'PCB:ArrangeComponents(Action=ArrangeOutsideBoard|$Description=Arrange selected components outside board)'
               MenuItem SEPARATOR
               MenuItem '移到网格(&G)'  'PCB:AlignComponents(Alignment=MoveToGrid|$Description=Move selected components to grid)'
          End
          MenuItem SEPARATOR
          Popup '撤消布线(&U){U}'
          Begin
               MenuItem '全部(&A)'  'PCB:UnRoute(Object = All)'
               MenuItem SEPARATOR
               MenuItem '网络(&N)'  'PCB:UnRoute(Object = Net)'
               MenuItem '连接(&C)'  'PCB:UnRoute(Object = Connection)'
               MenuItem '元件(&O)'  'PCB:UnRoute(Object = Component)'
          End
          MenuItem '密度图(&Y)'  PCB:DensityMap
          MenuItem '信号完整性分析(&E)'  SignalIntegrity:LaunchSIExeFromCurrentBoard
          MenuItem '反向注释(&N)'  PCB:ReAnnotate
          MenuItem '交叉检索(&C)'  'Client:CrossProbe(Repeat=False | FocusWindows=True)'
          MenuItem SEPARATOR
          Popup '转换(&Y)'
          Begin
               MenuItem '解散元件到自由图素(&C)'  'PCB:GroupPrimitives(Action=Explode | Object=Component)'
               MenuItem '解散坐标到自由图素(&O)'  'PCB:GroupPrimitives(Action=Explode | Object=Coordinate)'
               MenuItem '解散尺寸到自由图素(&D)'  'PCB:GroupPrimitives(Action=Explode | Object=Dimension)'
               MenuItem '解散多边形到自由图素(&Y)'  'PCB:GroupPrimitives(Action=Explode | Object=Polygon)'
               MenuItem SEPARATOR
               MenuItem '转换选中自由焊盘到过孔(&P)'  'PCB:ConvertSelected(Action=PadsToVias)'
               MenuItem '转换选中过孔到自由焊盘(&V)'  'PCB:ConvertSelected(Action=ViasToPads)'
               MenuItem SEPARATOR
               MenuItem '从选中元件建立联合(&U)'  'PCB:GroupPrimitives(Action=CreateComponentUnion)'
               MenuItem '从联合打散元件(&B)'  'PCB:GroupPrimitives(Action=BreakComponentUnion)'
               MenuItem '打散所有联合中元件(&L)'  'PCB:GroupPrimitives(Action=BreakAllComponentUnions)'
               MenuItem SEPARATOR
               MenuItem '增加选中图素到元件(&A)'  PCB:GroupPrimitives
          End
          MenuItem '泪滴焊盘(&T)...'  PCB:TearDropSelectedPads
          MenuItem 'Miter 角'  PCBMiter:DoMiter
          MenuItem '网络等长(&Z)'  PCB:EqualizeNetLengths
          MenuItem '包地(&J) '  PCB:OutlineSelectedObjects
          MenuItem SEPARATOR
          MenuItem '查找放置测试点(&F)'  PCB:FindTestPoints
          MenuItem '清除所有测试点(&S)'  'PCB:FindTestPoints(Action=ClearAllTestPoints)'
          MenuItem SEPARATOR
          MenuItem '优选项(&P)'  PCB:SetupPreferences
     End
     Popup '自动布线(&A) {A}'
     Begin
          MenuItem '全部(&A)'  'PCB:Autoroute(Action=Start)'
          MenuItem SEPARATOR
          MenuItem '网络(&N)'  'PCB:Autoroute(Action=Net)'
          MenuItem '连接(&C)'  'PCB:Autoroute(Action=Connection)'
          MenuItem '元件(&O)'  'PCB:Autoroute(Action=Component)'
          MenuItem '区域(&R)'  'PCB:Autoroute(Action=Area)'
          MenuItem SEPARATOR
          MenuItem '设置(&S)...'  'PCB:Autoroute(Action=Start)'
          MenuItem '停止(&T)'  'PCB:Autoroute(Action=Stop)'
          MenuItem '复位'  'PCB:Autoroute(Action=Reset)'
          MenuItem '暂停(&P)'  'PCB:Autoroute(Action=Pause)'
          MenuItem '重开始(&E)'  'PCB:Autoroute(Action=Restart)'
          MenuItem SEPARATOR
          Popup 'Specctra 接口(&I)'
          Begin
               MenuItem '导向器(&W)...'  RouteCCT:RunWizard
               MenuItem '设置输出选项(&S)'  RouteCCT:Setup
               MenuItem '输出设计文件(&E)'  RouteCCT:ExportDesignFile
               MenuItem SEPARATOR
               MenuItem '输入布线文件(&I)...'  RouteCCT:ImportRouteFile
          End
     End
     Popup '报告(&R) {R}'
     Begin
          MenuItem '选中的管脚(&E)...'  PCB:ListAllSelectedPins
          MenuItem '板信息(&B)...'  PCB:BoardInformation
          MenuItem SEPARATOR
          MenuItem '材料清单(&I)'  PCBBOM:RunWizard
          MenuItem '设计层次(&H)'  Client:ReportProjectHierarchy
          MenuItem '网络状态(&L)'  PCB:ReportNetlistStatus
          MenuItem '信号完整性(&G)'  SignalIntegrity:GenerateReport
          MenuItem '网络表比较(&N)...'  Sch:NetlistCompare 
          MenuItem SEPARATOR
          MenuItem '数控钻孔文件(&N)'  PCB:GenerateNCDrill
          MenuItem '插置文件(&K)'  PCB:ReportPickPlace
          MenuItem SEPARATOR
          MenuItem '测量距离(&M)'  PCB:MeasureDistance
          MenuItem '测量图素间距(&P)'  'PCB:MeasureDistance(Primitives=True)'
     End
     Popup '窗口(&W) {W}'
     Begin
          MenuItem '平铺(&T)\tShift+F4'  Client:TileAllOpenDocuments
          MenuItem '级联(&C)\tShift+F5'  Client:CascadeAllOpenDocuments
          MenuItem SEPARATOR
          MenuItem '水平平铺(&H)'  'Client:TileAllOpenDocuments(Mode=Horizontal)'
          MenuItem '垂直平铺(&V)'  'Client:TileAllOpenDocuments(Mode=Vertical)'
          MenuItem SEPARATOR
          MenuItem '排列图标(&I)'  Client:WindowArrangeIcons
          MenuItem '关闭全部文件(&A)'  Client:CloseAllOpenDocuments
     End
     Popup '帮助(&H) {H}'
     Begin
          MenuItem '内容(&C)'  'Client:RunHelpTopic(FileName=\Help\Protel.hlp|Topic=contents)'
          MenuItem 'PCB主题(&P)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=Contents)'
          MenuItem SEPARATOR
          Popup '主题(&O)'
          Begin
               MenuItem 'PCB设计实体(&O)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=DesignObjects)'
               MenuItem 'PCB设计层(&L)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=Layers)'
               MenuItem '定义新的PCB(&N)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=DefiningTheBoard)'
               MenuItem '原理图同步(&Z)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=LinkingToAdvancedSchematic)'
               MenuItem 'PCB元件(&C)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=ComponentsAndLibraries)'
               MenuItem 'PCB库(&B)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=LibraryEditor)'
               MenuItem '设计规则(&R)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=IntroducingDesignRules)'
               MenuItem '放置元件(&P)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=ComponentPlacement)'
               MenuItem '内电层(&W)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=PowerPlanes)'
               MenuItem '手动布线(&M)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=RoutingManually)'
               MenuItem '自动布线(&A)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=Autorouting)'
               MenuItem '到Specctra布线器接口(&I)'  'Client:RunHelpTopic(Filename=\Help\Cct.hlp|Topic=SetupSpecctraRouter)'
               MenuItem '设计验证(&V)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=DesignVerification)'
          End
          MenuItem '快捷键(&S)'  'Client:RunHelpTopic(FileName=\Help\pcbusr.hlp|Topic=KeyboardShortcutsTips)'
          MenuItem '过程参考(&R)'  'Client:RunHelpTopic(FileName=\Help\AdvPCB.hlp | Topic=contents)'
          MenuItem SEPARATOR
          Popup '宏(&M)'
          Begin
               MenuItem '层集(&L)'  'Macro:RunMacro(DesignName=\system\templates.ddb | DocumentName=macros\PcbLayer.bas | Language=ClientBasic)'
               MenuItem '配色方案(&)C...'  'Macro:RunMacro(DesignName=\system\templates.ddb | DocumentName=macros\PcbColor.bas | Language=ClientBasic)'
               MenuItem SEPARATOR
               MenuItem '参考(&R)'  'Client:RunHelpTopic(FileName=\Help\macusr.hlp|Topic=contents)'
          End
          Popup '弹射(&P)'
          Begin
               Popup '捕获网格(&G){G}'
               Begin
                    MenuItem '1 Mil'  'PCB:SnapGrid(Size=1Mil)'
                    MenuItem '5 Mil'  'PCB:SnapGrid(Size=5Mil)'
                    MenuItem '10 Mil'  'PCB:SnapGrid(Size=10Mil)'
                    MenuItem '20 Mil'  'PCB:SnapGrid(Size=20Mil)'
                    MenuItem '25 Mil'  'PCB:SnapGrid(Size=25Mil)'
                    MenuItem '50 Mil'  'PCB:SnapGrid(Size=50Mil)'
                    MenuItem '100 Mil'  'PCB:SnapGrid(Size=100Mil)'
                    MenuItem '0.025 mm'  'PCB:SnapGrid(Size=0.025MM)'
                    MenuItem '0.100 mm'  'PCB:SnapGrid(Size=0.100MM)'
                    MenuItem '0.250 mm'  'PCB:SnapGrid(Size=0.250MM)'
                    MenuItem '0.500 mm'  'PCB:SnapGrid(Size=0.500MM)'
                    MenuItem '1.000 mm'  'PCB:SnapGrid(Size=1.000MM)'
                    MenuItem '2.500 mm'  'PCB:SnapGrid(Size=2.500MM)'
                    MenuItem '其它(&O)...'  PCB:SnapGrid
                    MenuItem SEPARATOR
                    Popup '捕获网格X(&X)'
                    Begin
                         MenuItem '1 Mil'  'PCB:SnapGridXY(Axis=X|Value=1Mil)'
                         MenuItem '5 Mil'  'PCB:SnapGridXY(Axis=X|Value=5Mil)'
                         MenuItem '10 Mil'  'PCB:SnapGridXY(Axis=X|Value=10Mil)'
                         MenuItem '20 Mil'  'PCB:SnapGridXY(Axis=X|Value=20Mil)'
                         MenuItem '25 Mil'  'PCB:SnapGridXY(Axis=X|Value=25Mil)'
                         MenuItem '50 Mil'  'PCB:SnapGridXY(Axis=X|Value=50Mil)'
                         MenuItem '100 Mil'  'PCB:SnapGridXY(Axis=X|Value=100Mil)'
                         MenuItem '0.025 mm'  'PCB:SnapGridXY(Axis=X|Value=0.025MM)'
                         MenuItem '0.100 mm'  'PCB:SnapGridXY(Axis=X|Value=0.100MM)'
                         MenuItem '0.250 mm'  'PCB:SnapGridXY(Axis=X|Value=0.250MM)'
                         MenuItem '0.500 mm'  'PCB:SnapGridXY(Axis=X|Value=0.500MM)'
                         MenuItem '1.000 mm'  'PCB:SnapGridXY(Axis=X|Value=1.000MM)'
                         MenuItem '2.500 mm'  'PCB:SnapGridXY(Axis=X|Value=2.500MM)'
                         MenuItem '其它(&O)...'  'PCB:SnapGridXY(Axis=X)'
                    End
                    Popup '捕获网格Y(&Y)'
                    Begin
                         MenuItem '1 Mil'  'PCB:SnapGridXY(Axis=Y|Value=1Mil)'
                         MenuItem '5 Mil'  'PCB:SnapGridXY(Axis=Y|Value=5Mil)'