oalintr.h

增加串口,主要是wince方面的

/*++
THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE.
Copyright (c) 2001. Samsung Electronics, co. ltd  All rights reserved.

Module Name:  

Abstract:

    ARM920(S3C2400) interrupt definitions

rev:
	2002.1.28	: initial version (kwangyoon LEE, [e-mail])

Notes: 
--*/

// These are the 'standard' interrupts
#define SYSINTR_KEYBOARD    	(SYSINTR_FIRMWARE+0)
#define SYSINTR_TOUCH       	(SYSINTR_FIRMWARE+1)
#define SYSINTR_ADC         	(SYSINTR_FIRMWARE+2)
#define SYSINTR_SERIAL      	(SYSINTR_FIRMWARE+3)
#define SYSINTR_AUDIO       	(SYSINTR_FIRMWARE+4)
#define SYSINTR_PCMCIA_STATE    (SYSINTR_FIRMWARE+5)
#define SYSINTR_PCMCIA_EDGE     (SYSINTR_FIRMWARE+6)
#define SYSINTR_PCMCIA_LEVEL    (SYSINTR_FIRMWARE+7)
#define SYSINTR_TOUCH_CHANGED   (SYSINTR_FIRMWARE+8)
#define SYSINTR_SERIAL3        	(SYSINTR_FIRMWARE+9)
#define SYSINTR_ETHER       	(SYSINTR_FIRMWARE+10)

// Register USB host interrupt
#define SYSINTR_USB         	(SYSINTR_FIRMWARE+11)
// Register USB device interrupt
#define SYSINTR_USBD        	(SYSINTR_FIRMWARE+12)
#define SYSINTR_POWER        	(SYSINTR_FIRMWARE+13)

/////////////////////////////////////////////////////////////
// charlie, SDIO
#define	SYSINTR_SDMMC				 (SYSINTR_FIRMWARE+14)
#define SYSINTR_SDMMC_CARD_DETECT	 (SYSINTR_FIRMWARE+15)
#define SYSINTR_SDMMC_SDIO_INTERRUPT (SYSINTR_FIRMWARE+16)
/////////////////////////////////////////////////////////////
#define SYSINTR_BUTTON               (SYSINTR_FIRMWARE+17)
#define	SYSINTR_DMA0				 (SYSINTR_FIRMWARE+18)
#define SYSINTR_SERIAL2        	(SYSINTR_FIRMWARE+19)



// I get the follow MapIrq2SysIntr inline function from CEPC include directory. hjcho.
//
// CEPC device drivers should get their IRQ number from the registry and use
// MapIrq2SysIntr to get the appropriate SYSINTR_* number to use.
_inline
DWORD
MapIrq2SysIntr(DWORD _Irq)
{
    if( _Irq<=19 )
        return ( SYSINTR_FIRMWARE + _Irq );
    else
        return (0xffffffff);
}


// Here are the names of the values stored in the registry
#define PC_REG_IRQ_VAL_NAME TEXT("IRQ") 
#define PC_REG_IRQ_VAL_LEN  sizeof( DWORD )

#define PC_REG_IOBASE_VAL_NAME TEXT("IoBase") 
#define PC_REG_IOBASE_VAL_LEN  sizeof( DWORD )
#define PC_REG_IOLEN_VAL_NAME TEXT("IoLen") 
#define PC_REG_IOLEN_VAL_LEN  sizeof( DWORD )

#define PC_REG_CONFIGBASE_VAL_NAME TEXT("ConfigBase") 
#define PC_REG_CONFIGBASE_VAL_LEN  sizeof( DWORD )
#define PC_REG_CONFIGLEN_VAL_NAME TEXT("ConfigLen") 
#define PC_REG_CONFIGLEN_VAL_LEN  sizeof( DWORD )

#define PC_REG_DMA_VAL_NAME TEXT("DMA") 
#define PC_REG_DMA_VAL_LEN  sizeof( DWORD )

#define PC_REG_DEVINDEX_VAL_NAME TEXT("DeviceArrayIndex") 
#define PC_REG_DEVINDEX_VAL_LEN  sizeof( DWORD )