cfw.c

增加串口,主要是wince方面的

		break;
        
	case SYSINTR_POWER:
		s2410INT->rINTMSK |= BIT_EINT0;
		s2410INT->rINTMSK |= BIT_EINT2;
		break;        

	default:
		break;
	}
	INTERRUPTS_ON();
}


//------------------------------------------------------------------------------
//  
//  @func   BOOL | OEMInterruptDone | Signal completion of interrupt processing
//  @rdesc  none
//  @comm   OEMInterruptDone is called by the Kernel when a device driver
//          calls <f InterruptDone>. The system is not preemtible when this
//          function is called.
//  @xref   <l Overview.Kernel Interrupt Support> <f InterruptDone>
//  
//------------------------------------------------------------------------------
void 
OEMInterruptDone(DWORD idInt)	// @parm Interrupt ID. See <t Interrupt ID's>
                    			// for the list of possible values.
{
	volatile INTreg *s2410INT	= (INTreg *)INT_BASE;
	volatile IOPreg *s2410IOP	= (IOPreg *)IOP_BASE;    

	INTERRUPTS_OFF();
	
	switch (idInt) 
	{

    case SYSINTR_DMA0:
        s2410INT->rINTMSK &= ~BIT_DMA0; // SDIO DMA interrupt
		//RETAILMSG(1,(TEXT("::: SYSINTR_DMA0    OEMInterruptDone\r\n")));
		break;

	case SYSINTR_SDMMC:
		s2410INT->rINTMSK &= ~BIT_MMC;
		//RETAILMSG(1,(TEXT("::: SYSINTR_SDMMC    OEMInterruptDone\r\n")));
		break;

	case SYSINTR_SDMMC_SDIO_INTERRUPT:
		s2410INT->rINTMSK &= ~BIT_MMC;
		//RETAILMSG(1,(TEXT("::: SYSINTR_SDMMC_SDIO_INTERRUPT    OEMInterruptDone\r\n")));
		break;

	case SYSINTR_SDMMC_CARD_DETECT:
		s2410IOP->rEINTMASK &= ~(1 << 18);
		s2410INT->rINTMSK   &= ~BIT_EINT8_23;
		//RETAILMSG(1,(TEXT("::: SYSINTR_SDMMC_CARD_DETECT    OEMInterruptDone\r\n")));
		break;        

    case SYSINTR_TOUCH:
        /*
         * Nothing has to be done here as interrupts are masked and unmasked by the touch
         * handler in the HAL.
         */
		s2410INT->rINTMSK &= ~BIT_TIMER1;
        break;

    case SYSINTR_TOUCH_CHANGED:
        /*
         * Nothing has to be done here as interrupts are masked and unmasked by the touch
         * handler in the HAL.
         */
		s2410INT->rINTMSK &= ~BIT_ADC;
		s2410INT->rINTSUBMSK &= ~INTSUB_TC;
		//RETAILMSG(0,(TEXT("OEMInterruptDone:TOUCH CHANGED\n\r\n")));
        break;

	case SYSINTR_KEYBOARD:
		s2410INT->rINTMSK &= ~BIT_EINT1;
		break;

	case SYSINTR_SERIAL:
		s2410INT->rINTMSK    &= ~BIT_UART0;
		s2410INT->rINTSUBMSK &= ~INTSUB_RXD0;
		break;

	case SYSINTR_SERIAL2:
		s2410INT->rINTMSK    &= ~BIT_UART1;
		s2410INT->rINTSUBMSK &= ~INTSUB_RXD1;
		break;

	case SYSINTR_SERIAL3:
		s2410INT->rINTMSK    &= ~BIT_UART2;
		s2410INT->rINTSUBMSK &= ~INTSUB_RXD2;
		break;

/*	case SYSINTR_IR:
		s2410INT->rINTMSK    &= ~BIT_UART2;
		s2410INT->rINTSUBMSK &= ~INTSUB_RXD2;
		break;*/

	case SYSINTR_AUDIO:
		// DMA1 is for audio input.
		// DMA2 is for audio output.
		s2410INT->rSRCPND = (BIT_DMA1 | BIT_DMA2); 
		if (s2410INT->rINTPND & BIT_DMA1) s2410INT->rINTPND = BIT_DMA1;
		if (s2410INT->rINTPND & BIT_DMA2) s2410INT->rINTPND = BIT_DMA2;
        s2410INT->rINTMSK &= ~BIT_DMA1;
        s2410INT->rINTMSK &= ~BIT_DMA2;
		break;

	case SYSINTR_ADC:
		break;

	case SYSINTR_PCMCIA_LEVEL:
		s2410INT->rSRCPND	= BIT_EINT8_23;
		if (s2410INT->rINTPND & BIT_EINT8_23) s2410INT->rINTPND = BIT_EINT8_23; 
		s2410INT->rINTMSK   &= ~BIT_EINT8_23;
		s2410IOP->rEINTMASK &= ~(1<<8);
		//RETAILMSG(1,(TEXT("::: SYSINTR_PCMCIA_LEVEL    OEMInterruptDone\r\n")));
		break;

	case SYSINTR_PCMCIA_EDGE:
		//RETAILMSG(1,(TEXT("::: SYSINTR_PCMCIA_EDGE    OEMInterruptDone\r\n")));
		break;

	case SYSINTR_PCMCIA_STATE:
		s2410INT->rINTMSK &= ~BIT_EINT3;
		//RETAILMSG(1,(TEXT("::: SYSINTR_PCMCIA_STATE    OEMInterruptDone\r\n")));
		break;

	case SYSINTR_ETHER:
		s2410INT->rINTMSK   &= ~BIT_EINT8_23;
		s2410IOP->rEINTMASK &= ~0x200;
		break;
			        
	case SYSINTR_USB:
		s2410INT->rINTMSK &= ~BIT_USBH;
		break;

	case SYSINTR_USBD:
		s2410INT->rINTMSK &= ~BIT_USBD;
		//RETAILMSG(1,(TEXT("::: SYSINTR_USBD    OEMInterruptDone\r\n")));
		break;
        
	case SYSINTR_POWER:
		s2410INT->rSRCPND = BIT_EINT0;
		// S3C2410X Developer Notice (page 4) warns against writing a 1 to a 0 bit in the INTPND register.
		if (s2410INT->rINTPND & BIT_EINT0) s2410INT->rINTPND = BIT_EINT0;
		s2410INT->rINTMSK &= ~BIT_EINT0;
		s2410INT->rSRCPND = BIT_EINT2;
		// S3C2410X Developer Notice (page 4) warns against writing a 1 to a 0 bit in the INTPND register.
		if (s2410INT->rINTPND & BIT_EINT2) s2410INT->rINTPND = BIT_EINT2;
		s2410INT->rINTMSK &= ~BIT_EINT2;
		break;

	}
    INTERRUPTS_ON();	
}


//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
BOOL 
OEMGetExtensionDRAM(
    LPDWORD lpMemStart, 
    LPDWORD lpMemLen
    ) 
{
    return FALSE; // no extension DRAM
}


//------------------------------------------------------------------------------
//
//  OEMQueryPerformanceCounter
//  
//      The OEMQueryPerformanceCounter function retrieves the current value of 
//      the high-resolution performance counter, if one exists. 
//  
//  BOOL QueryPerformanceCounter(
//  
//      LARGE_INTEGER  *lpliPerformanceCount    // address of current counter value
//     );   
//  
//  Parameters
//  
//  lpliPerformanceCount
//  
//      Points to a variable that the function sets, in counts, to the current 
//      performance-counter value. If the installed hardware does not support 
//      a high-resolution performance counter, this parameter can be to zero. 
//  
//  Return Value
//  
//      If the installed hardware supports a high-resolution performance 
//      counter, the return value is TRUE.
//      If the installed hardware does not support a high-resolution 
//      performance counter, the return value is FALSE.   
//  
//  If this function is implemented by the OEM, the pointer pQueryPerformanceCounter
//  should be initialized as follows:
//  
//  BOOL (*pQueryPerformanceCounter)(LARGE_INTEGER *lpliPerformanceCount)=OEMQueryPerformanceCounter;
//
//------------------------------------------------------------------------------
BOOL 
OEMQueryPerformanceCounter(
    LARGE_INTEGER *lpliPerformanceCount
    )
{
    extern DWORD PerfCountSinceTick();
    
    ULARGE_INTEGER liBase;
    DWORD dwCurCount;

	// Make sure CurTicks is the same before and after read of counter to account for
	// possible rollover
    do {
        liBase = CurTicks;
        dwCurCount = PerfCountSinceTick();
    } while  (liBase.LowPart != CurTicks.LowPart) ;  

    lpliPerformanceCount->QuadPart = liBase.QuadPart + dwCurCount;
    
    return TRUE;
}



//------------------------------------------------------------------------------
//
//  OEMQueryPerformanceFrequency
//  
//      The OEMQueryPerformanceFrequency function retrieves the frequency of 
//      the high-resolution performance counter, if one exists. 
//  
//  BOOL OEMQueryPerformanceFrequency(
//  
//      LARGE_INTEGER  *lpliPerformanceFreq     // address of current frequency
//     );   
//  
//  Parameters
//  
//  lpliPerformanceFreq
//  
//      Points to a variable that the function sets, in counts per second, to 
//      the current performance-counter frequency. If the installed hardware 
//      does not support a high-resolution performance counter, this parameter
//      can be to zero. 
//  
//  Return Value
//  
//      If the installed hardware supports a high-resolution performance 
//      counter, the return value is TRUE.
//      If the installed hardware does not support a high-resolution 
//      performance counter, the return value is FALSE.
//  
//  If this function is implemented by the OEM, the pointer pQueryPerformanceFrequency
//  should be initialized as follows:
//  
//  BOOL (*pQueryPerformanceFrequency)(LARGE_INTEGER *lpPerformanceFrequency)=OEMQueryPerformanceFrequency;
//
//------------------------------------------------------------------------------
BOOL 
OEMQueryPerformanceFrequency(
    LARGE_INTEGER *lpliPerformanceFreq
    ) 
{
    extern DWORD PerfCountFreq();
    
    lpliPerformanceFreq->HighPart = 0;
    lpliPerformanceFreq->LowPart  = PerfCountFreq();
    return TRUE;
}

// set pointers to OEM functions
BOOL (*pQueryPerformanceCounter)(LARGE_INTEGER *lpliPerformanceCount)=OEMQueryPerformanceCounter;
BOOL (*pQueryPerformanceFrequency)(LARGE_INTEGER *lpliPerformanceFreq)=OEMQueryPerformanceFrequency;


//
// CPU-specific functions for OEMIdle
//
extern void  CPUEnterIdle(DWORD dwIdleParam);
extern DWORD CPUGetSysTimerCountMax(DWORD dwIdleMSecRequested);
extern void  CPUSetSysTimerCount(DWORD dwIdleMSec);
extern BOOL CPUClearSysTimerIRQ(void);


//
// dougfir or later
//
extern DWORD
CPUGetSysTimerCountElapsed(
    DWORD dwTimerCountdownMSec,
    volatile DWORD *pCurMSec,
    DWORD *pPartialCurMSec,
    volatile ULARGE_INTEGER *pCurTicks
    );

//------------------------------------------------------------------------------
//
//  This routine is called by the kernel when there are no threads ready to
//  run. The CPU should be put into a reduced power mode and halted. It is 
//  important to be able to resume execution quickly upon receiving an interrupt.
//  Note: It is assumed that interrupts are off when OEMIdle is called.  Interrrupts
//  are turned off when OEMIdle returns.
//
//------------------------------------------------------------------------------
static DWORD dwPartialCurMSec = 0;           // Keep CPU-specific sub-millisecond leftover.
void
OEMIdle(
    DWORD dwIdleParam
    )
{
    DWORD dwIdleMSec;
    DWORD dwPrevMSec = *pCurMSec;

    // Use for 64-bit math
    ULARGE_INTEGER currIdle = {
        curridlelow,
        curridlehigh
    };

    if ((int) (dwIdleMSec = dwReschedTime - dwPrevMSec) <= 0) {
        // already time to wakeup
        return;
    }

    // just idle till tick if profiling or running iltiming
    if (bProfileTimerRunning || fIntrTime) {  // fIntrTime : Interrupt Latency timeing.

        // idle till end of 'tick'

        CPUEnterIdle(dwIdleParam);

        // Update global idle time and return
        currIdle.QuadPart += RESCHED_PERIOD;