fyd12864+ds1820.opt

此程序是我用AT89S52单片机来控制显示屏FYD12864,采用C语言编写的可以显示图形,我调试了一周,在此和大家一起分享

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,436207617,0,16,16,0,<.\Display.c><Display.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,0,0,0,0,0,0,0,0,182,2,0,0,54,1,0,0 }
OPTFFF 1,2,1,436207617,0,1,1,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,22,0,0,0,22,0,0,0,204,2,0,0,76,1,0,0 }
OPTFFF 1,3,1,419430403,0,1,1,0,<.\ds18b20.c><ds18b20.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,44,0,0,0,44,0,0,0,226,2,0,0,98,1,0,0 }

ExtF <.\LCD.H> 209,209,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,66,0,0,0,66,0,0,0,252,2,0,0,124,1,0,0 }
ExtF <.\MAIN.H> 55,55,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,88,0,0,0,88,0,0,0,18,3,0,0,146,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=12000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTDL (S8051.DLL)()(DP51.DLL)(-pAT52)(S8051.DLL)()(TP51.DLL)(-pAT52)
  OPTDBG 48125,0,()()()()()()()()()() ()()()()
  OPTDF 0x0
  OPTLE <>
  OPTLC <>
EndOpt