u241mon.c

2410 boot loader,usb ftp

            if(Uart_Getch()!='1')
            {
	    	*pMagicNum=0x0;
		Uart_SendString("UART ch.0 will be used for console at next boot.\n");        	    	
	    }
	    else
	    {
	        *pMagicNum=0x12345678;
 		Uart_SendString("UART ch.1 will be used for console at next boot.\n");        
                Uart_SendString("UART ch.0 will be used after long power-off.\n");
	    }
            Uart_SendString("System is waiting for a reset. Please, Reboot!!!\n");
            while(1);
            break;
        case '4':
        	      menuUsed=-1;
        	      return;    
        default:
            break;
	}	
    }	    

}


int WaitDownload(void)
{
    U32 i;
    U32 j;
    U16 cs;
    U32 temp;
    U16 dnCS;
    int first=1;
    float time;
    U8 tempMem[16];
    U8 key, easy=0;

    
    checkSum=0;
    downloadAddress=(U32)tempMem; //_RAM_STARTADDRESS; 
    downPt=(unsigned char *)downloadAddress;
	//This address is used for receiving first 8 byte.
    downloadFileSize=0;
    
#if 0
    MMU_DisableICache(); 
        //For multi-ICE. 
        //If ICache is not turned-off, debugging is started with ICache-on.
#endif

    /*******************************/
    /*    Test program download    */
    /*******************************/
    j=0;

    if(isUsbdSetConfiguration==0)
    {
	Uart_SendString("USB host is not connected yet.\n");
    }

    while(downloadFileSize==0)
    {
    	
        if(first==1 && isUsbdSetConfiguration!=0)
        {
            Uart_SendString("USB host is connected. Waiting a download.\n");
            first=0;
        }
        else if(j==(0xff00*4) && first)
        {
            Uart_SendString("Unable to connect USB host!!\n");
            return 0;	
        }
        

	if(j%0x50000==0)Led_Display(0x6);
	if(j%0x50000==0x28000)Led_Display(0x9);
	j++;

    if(!easymode)
	 key=Uart_GetKey();
	else
	{
	 Delay(100);	
	 key=1;
	}
	 
	if(key!=0 && !easy)
	{
	    if(!easymode)
	     Menu();
            first=1; //To display the message,"USB host ...."
        if(easymode)
         easy=1;

        if(menuUsed==-1) return 0;             
	}

    }

    Timer_InitEx();      
    Timer_StartEx();  

#if USBDMA    

    rINTMSK&=~(BIT_DMA2);  

    ClearEp3OutPktReady(); 
    	// indicate the first packit is processed.
    	// has been delayed for DMA2 cofiguration.

    if(downloadFileSize>EP3_PKT_SIZE)
    {
        if(downloadFileSize<=(0x80000))
        {
      	    ConfigEp3DmaMode(downloadAddress+EP3_PKT_SIZE-8,downloadFileSize-EP3_PKT_SIZE);	
  	    //wait until DMA reload occurs.
	    while((rDSTAT2&0xfffff)==0);

      	    //will not be used.
       	    rDIDST2=(downloadAddress+downloadFileSize-EP3_PKT_SIZE);  
       	    rDIDSTC2=(0<<1)|(0<<0);  
	    rDCON2=rDCON2&~(0xfffff)|(0);        	    
	}
      	else
      	{
      	    ConfigEp3DmaMode(downloadAddress+EP3_PKT_SIZE-8,0x80000-EP3_PKT_SIZE);
  	    //wait until DMA reload occurs.
	    while((rDSTAT2&0xfffff)==0);
      	    
    	    if(downloadFileSize>(0x80000*2))//for 1st autoreload
    	    {
        	rDIDST2=(downloadAddress+0x80000-8);  //for 1st autoreload.
        	rDIDSTC2=(0<<1)|(0<<0);  
    	        rDCON2=rDCON2&~(0xfffff)|(0x80000);        	  

  		while(rEP3_DMA_TTC<0xfffff)
  		{
  		    rEP3_DMA_TTC_L=0xff; 
  		    rEP3_DMA_TTC_M=0xff;
  		    rEP3_DMA_TTC_H=0xf;
  		}
    	    }	
 	    else
 	    {
 	        rDIDST2=(downloadAddress+0x80000-8);  //for 1st autoreload.
      	        rDIDSTC2=(0<<1)|(0<<0);  
 	        rDCON2=rDCON2&~(0xfffff)|(downloadFileSize-0x80000); 		

  		while(rEP3_DMA_TTC<0xfffff)
  		{
  		    rEP3_DMA_TTC_L=0xff; 
  		    rEP3_DMA_TTC_M=0xff;
  		    rEP3_DMA_TTC_H=0xf;
  		}
	    }
	}
 	totalDmaCount=0;
    }
    else
    {
	totalDmaCount=downloadFileSize;
    }
#endif

    Uart_Printf("\nNow, Downloading [ADDRESS:%xh,TOTAL:%d]\n",
    		downloadAddress,downloadFileSize);
    Uart_Printf("RECEIVED SIZE: %8d",0);

#if USBDMA    
    j=0x10000;

    while(1)
    {
    	if( (rDCDST2-(U32)downloadAddress+8)>=j)
	{
	    Uart_Printf("\b\b\b\b\b\b\b\b%8d",j);
   	    j+=0x10000;
   	    Led_Round();
	}
	if(totalDmaCount>=downloadFileSize)break;
    }

#else
    j=0x10000;

    while(((U32)downPt-downloadAddress)<(downloadFileSize-8))
    {
	if( ((U32)downPt-downloadAddress)>=j)
	{
	    Uart_Printf("\b\b\b\b\b\b\b\b%8d",j);
   	    j+=0x10000;
   	    Led_Round();
	}
    }
#endif
    time=Timer_StopEx();
    Uart_Printf("\b\b\b\b\b\b\b\b%8d",downloadFileSize);	
    //Uart_Printf("(%5.1fKB/S,%3.1fS)\n",(float)(downloadFileSize/time/1000.),time);
    Uart_Printf("\n");
    
#if USBDMA    
    /*******************************/
    /*     Verify check sum        */
    /*******************************/

    Uart_SendString("Now, Checksum calculation\n");

    cs=0;    
    i=(downloadAddress);
    j=(downloadAddress+downloadFileSize-10)&0xfffffffc;
    while(i<j)
    {
    	temp=*((U32 *)i);
    	i+=4;
    	cs+=(U16)(temp&0xff);
    	cs+=(U16)((temp&0xff00)>>8);
    	cs+=(U16)((temp&0xff0000)>>16);
    	cs+=(U16)((temp&0xff000000)>>24);
    }

    i=(downloadAddress+downloadFileSize-10)&0xfffffffc;
    j=(downloadAddress+downloadFileSize-10);
    while(i<j)
    {
  	cs+=*((U8 *)i++);
    }
    
    checkSum=cs;
#else
    //checkSum was calculated including dnCS. So, dnCS should be subtracted.
    checkSum=checkSum - *((unsigned char *)(downloadAddress+downloadFileSize-8-2))
	     - *( (unsigned char *)(downloadAddress+downloadFileSize-8-1) );	
#endif	  

    dnCS=*((unsigned char *)(downloadAddress+downloadFileSize-8-2))+
	(*( (unsigned char *)(downloadAddress+downloadFileSize-8-1) )<<8);

    if(checkSum!=dnCS)
    {
	Uart_Printf("Checksum Error!!! MEM:%x DN:%x\n",checkSum,dnCS);
	downloadFileSize = 0;
	return 0;
    }

    Uart_SendString("Download O.K.\n\n");
    Uart_TxEmpty(consoleNum);


    if(download_run==1)
    {
        rINTMSK=BIT_ALLMSK;
    	run=(void (*)(void))downloadAddress;
	run();
    }
    
    return 1;
    
}




static void Isr_Init(void)
{
    pISR_UNDEF=(unsigned)HaltUndef;
    pISR_SWI  =(unsigned)HaltSwi;
    pISR_PABORT=(unsigned)HaltPabort;
    pISR_DABORT=(unsigned)HaltDabort;
    rINTMOD=0x0;	  // All=IRQ mode
    rINTMSK=BIT_ALLMSK;	  // All interrupt is masked.

    //pISR_URXD0=(unsigned)Uart0_RxInt;	
    //rINTMSK=~(BIT_URXD0);   //enable UART0 RX Default value=0xffffffff

#if 1
    pISR_USBD =(unsigned)IsrUsbd;
    pISR_DMA2 =(unsigned)IsrDma2;
#else
    pISR_IRQ =(unsigned)IsrUsbd;	
    	//Why doesn't it receive the big file if use this. (???)
    	//It always stops when 327680 bytes are received.
#endif    
    ClearPending(BIT_DMA2);
    ClearPending(BIT_USBD);
    //rINTMSK&=~(BIT_USBD);  
   
    //pISR_FIQ,pISR_IRQ must be initialized
}


void HaltUndef(void)
{
    Uart_Printf("Undefined instruction exception!!!\n");
    while(1);
}

void HaltSwi(void)
{
    Uart_Printf("SWI exception!!!\n");
    while(1);
}

void HaltPabort(void)
{
    Uart_Printf("Pabort exception!!!\n");
    while(1);
}

void HaltDabort(void)
{
    Uart_Printf("Dabort exception!!!\n");
    while(1);
}