2410test.c

2410 boot loader,usb ftp

//    ChangeMPllValue(0x66,0x1,0x1);    // FCLK=220MHz   
//    ChangeMPllValue(0x69,0x1,0x1);    // FCLK=226MHz       
//    ChangeMPllValue(0x96,0x2,0x1);    // FCLK=237MHz
    
    //Port_Init();
    //Isr_Init();
//    Rtc_Init();
    //Uart_Init2(0,115200);
    //Uart_Select(0);

    //Check whether or not the POWER_OFF wake-up.
    Delay(0);	//calibrate Delay()
    Uart_Printf("\n\n");
    
    //Check_PowerOffWakeUp();  //It's needed for power-off STOP mode test.   

//SJS July 15, 2002
    //Turn on LCD. All test will be done while the LCD is turned on.
    //PWR_Lcd_Tft_16Bit_240320_On();

    //Save the wasted power consumption on GPIO.
    rIISPSR=(2<<5)|(2<<0); //IIS_LRCK=44.1Khz @384fs,PCLK=50Mhz.
    rGPHCON = rGPHCON & ~(0xf<<18)|(0x5<<18);   //CLKOUT 0,1=OUTPUT to reduce the power consumption.


//SJS July 15, 2002
    //Turn on LCD. All test will be done while the LCD is turned on.
    //Test_Lcd_Tft_8Bit_240320_On();
    while(1)
    {
    	int key;
        i = 0;
        

        //GPG4 Output Port [9:8] 00      -> LCD power off
//        rGPGCON = (rGPGCON & 0xfffffcff) | (1<<8);
//        rGPGDAT &= 0xffef;        
        
        Uart_Printf("\n\nSMDK2410 Board (MCU S3C2410) Test Program Ver 1.1(20020801) FCLK = %d Hz\n\n", FCLK);
        
        while(1)
        {   //display menu
            Uart_Printf("%2d:%s ",i,function[i][1]);
            i++;
            if((int)(function[i][0])==0)
            {
                Uart_Printf("\n");
                break;
            }
            if((i%4)==0)
            Uart_Printf("\n");
        }
        Uart_Printf("\n99 Exit\n");
        Uart_Printf("\nSelect the function to test : ");
        key = Uart_GetIntNum();
        if(key==99) return;
        else i=key;
        Uart_SendString("\n");

        //GPG4 Output Port [9:8] 01      -> LCD power On
        rGPGCON = (rGPGCON & 0xfffffcff) | (1<<8);
        rGPGDAT = (rGPGDAT & 0xffef) | (1<<4);        
        
        if(i>=0 && (i<(sizeof(function)/8)) ) 
            ( (void (*)(void)) (function[i][0]) )();            
    }
}

//===================================================================
void u241test_easy(int sel)
{
    int i;
    

    u241test_easymode = sel;
   
    Led_Display(15);
    
    //MMU_Init();
   
#if ADS10   
    __rt_lib_init();                //for ADS 1.0
#endif
    
//    ChangeClockDivider(0,0);          // 1:1:1    
//    ChangeClockDivider(1,0);          // 1:2:2    
    //ChangeClockDivider(1,1);          // 1:2:4    

//    ChangeMPllValue(0x92,0x4,0x2);    // FCLK=50MHz    
//    ChangeMPllValue(0x96,0x5,0x1);    // FCLK=135428571Hz 
//    ChangeMPllValue(0x2a,0x1,0x0);    // FCLK=200MHz   
//    ChangeMPllValue(0x5c,0x1,0x1);    // FCLK=200MHz
//    ChangeMPllValue(0x5c,0x4,0x0);    // FCLK=200MHz
//    ChangeMPllValue(0x8e,0x7,0x0);    // FCLK=200MHz        
    //ChangeMPllValue(0xa1,0x3,0x1);    // FCLK=202.8MHz  
//    ChangeMPllValue(0x66,0x1,0x1);    // FCLK=220MHz   
//    ChangeMPllValue(0x69,0x1,0x1);    // FCLK=226MHz       
//    ChangeMPllValue(0x96,0x2,0x1);    // FCLK=237MHz
    
    //Port_Init();
    Isr_Init();
//    Rtc_Init();
    //Uart_Init2(0,115200);
    //Uart_Select(0);

    //Check whether or not the POWER_OFF wake-up.
    Delay(0);	//calibrate Delay()
    Uart_Printf("\n\n");
    //Check_PowerOffWakeUp();  //It's needed for power-off STOP mode test.   

//SJS July 15, 2002
    //Turn on LCD. All test will be done while the LCD is turned on.
    //PWR_Lcd_Tft_16Bit_240320_On();

    //Save the wasted power consumption on GPIO.
    //rIISPSR=(2<<5)|(2<<0); //IIS_LRCK=44.1Khz @384fs,PCLK=50Mhz.
    //rGPHCON = rGPHCON & ~(0xf<<18)|(0x5<<18);   //CLKOUT 0,1=OUTPUT to reduce the power consumption.

//SJS July 15, 2002
    //Turn on LCD. All test will be done while the LCD is turned on.
    //Test_Lcd_Tft_8Bit_240320_On();
    //while(1)
    {
        i = 0;
      
        //GPG4 Output Port [9:8] 00      -> LCD power off
//        rGPGCON = (rGPGCON & 0xfffffcff) | (1<<8);
//        rGPGDAT &= 0xffef;        
        
        //Uart_Printf("\n\nSMDK2410 Board (MCU S3C2410) Test Program Ver 1.1(20020801) FCLK = %d Hz\n\n", FCLK);
        /*
        while(1)
        {   //display menu
            Uart_Printf("%2d:%s",i,function[i][1]);
            i++;
            if((int)(function[i][0])==0)
            {
                Uart_Printf("\n");
                break;
            }
            if((i%4)==0)
            Uart_Printf("\n");
        }
        
        Uart_Printf("\nSelect the function to test : ");
        */
        //i = Uart_GetIntNum();
        i = 85;
        //Uart_Printf("85\n");

        //GPG4 Output Port [9:8] 01      -> LCD power On
        //rGPGCON = (rGPGCON & 0xfffffcff) | (1<<8);
        //rGPGDAT = (rGPGDAT & 0xffef) | (1<<4);        
        
        if(i>=0 && (i<(sizeof(function)/8)) ) 
            ( (void (*)(void)) (function[i][0]) )();            
    }
    
    
    u241test_easymode = 0;
}



//===================================================================
static void Isr_Init(void)
{
    pISR_UNDEF  = (unsigned)HaltUndef;
    pISR_SWI    = (unsigned)HaltSwi;
    pISR_PABORT = (unsigned)HaltPabort;
    pISR_DABORT = (unsigned)HaltDabort;
    
    rINTMOD     = 0x0;                     //All=IRQ mode
//    rINTCON=0x5;                           //Non-vectored,IRQ enable,FIQ disable    
    rINTMSK     = BIT_ALLMSK;              //All interrupt is masked.
    rINTSUBMSK  = BIT_SUB_ALLMSK;          //All sub-interrupt is masked. <- April 01, 2002 SOP

//    rINTSUBMSK  = ~(BIT_SUB_RXD0);         //Enable Rx0 Default value=0x7ff
//    rINTMSK     = ~(BIT_UART0);            //Enable UART0 Default value=0xffffffff    
    
//    pISR_UART0=(unsigned)RxInt;            //pISR_FIQ,pISR_IRQ must be initialized
}

/*
//===================================================================
void HaltUndef(void)
{
    Uart_SendString("Undefined instruction exception.\n");
    while(1);
}

//===================================================================
void HaltSwi(void)
{
    Uart_SendString("SWI exception.\n");
    while(1);
}

//===================================================================
void HaltPabort(void)
{
    Uart_SendString("Pabort exception.\n");
    while(1);
}

//===================================================================
void HaltDabort(void)
{
    Uart_SendString("Dabort exception.\n");
    while(1);
}
*/

//===================================================================
void Not_Support(void)
{
    Uart_SendString("Unable to use selected function.\n");
}



/*
//=========================
    while(1)
    {
       Led_Display(3);
    }
//=========================    
*/
/*
//=========================
    while(1)
    {
       Led_Display(1);
       Delay(1500);   
       Led_Display(2);
       Delay(1500);             
       Led_Display(4);
       Delay(1500);   
       Led_Display(8);
       Delay(1500);                
    }
//=========================   
*/