⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 ethernetif.c

📁 lwip在ucos上的移植源码
💻 C
字号:
/* * Copyright (c) 2001, Swedish Institute of Computer Science. * All rights reserved.  * * Redistribution and use in source and binary forms, with or without  * modification, are permitted provided that the following conditions  * are met:  * 1. Redistributions of source code must retain the above copyright  *    notice, this list of conditions and the following disclaimer.  * 2. Redistributions in binary form must reproduce the above copyright  *    notice, this list of conditions and the following disclaimer in the  *    documentation and/or other materials provided with the distribution.  * 3. Neither the name of the Institute nor the names of its contributors  *    may be used to endorse or promote products derived from this software  *    without specific prior written permission.  * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF  * SUCH DAMAGE.  * * This file is part of the lwIP TCP/IP stack. *  * Author: Adam Dunkels <adam@sics.se> * * $Id: ethernetif.c,v 1.1.1.1 2003/05/17 05:06:57 chenyu Exp $ *//* * This file is a skeleton for developing Ethernet network interface * drivers for lwIP. Add code to the low_level functions and do a * search-and-replace for the word "ethernetif" to replace it with * something that better describes your network interface. */#include "lwip/debug.h"#include "lwip/opt.h"#include "lwip/def.h"#include "lwip/mem.h"#include "lwip/pbuf.h"#include "lwip/sys.h"#include "netif/arp.h"/* Define those to better describe your network interface. */#define IFNAME0 'e'#define IFNAME1 't'struct ethernetif {  struct eth_addr *ethaddr;  /* Add whatever per-interface state that is needed here. */};static const struct eth_addr ethbroadcast = {{0xff,0xff,0xff,0xff,0xff,0xff}};/* Forward declarations. */static void  ethernetif_input(struct netif *netif);static err_t ethernetif_output(struct netif *netif, struct pbuf *p,			       struct ip_addr *ipaddr);/*-----------------------------------------------------------------------------------*/static voidlow_level_init(struct netif *netif){  struct ethernetif *ethernetif;  ethernetif = netif->state;    /* Obtain MAC address from network interface. */  ethernetif->ethaddr->addr[0] = ;  ethernetif->ethaddr->addr[1] = ;  ethernetif->ethaddr->addr[2] = ;  /* Do whatever else is needed to initialize interface. */  }/*-----------------------------------------------------------------------------------*//* * low_level_output(): * * Should do the actual transmission of the packet. The packet is * contained in the pbuf that is passed to the function. This pbuf * might be chained. * *//*-----------------------------------------------------------------------------------*/static err_tlow_level_output(struct ethernetif *ethernetif, struct pbuf *p){  struct pbuf *q;  initiate transfer();    for(q = p; q != NULL; q = q->next) {    /* Send the data from the pbuf to the interface, one pbuf at a       time. The size of the data in each pbuf is kept in the ->len       variable. */    send data from(q->payload, q->len);  }  signal that packet should be sent();  #ifdef LINK_STATS  stats.link.xmit++;#endif /* LINK_STATS */        return ERR_OK;}/*-----------------------------------------------------------------------------------*//* * low_level_input(): * * Should allocate a pbuf and transfer the bytes of the incoming * packet from the interface into the pbuf. * *//*-----------------------------------------------------------------------------------*/static struct pbuf *low_level_input(struct ethernetif *ethernetif){  struct pbuf *p, *q;  u16_t len;  /* Obtain the size of the packet and put it into the "len"     variable. */  len = ;  /* We allocate a pbuf chain of pbufs from the pool. */  p = pbuf_alloc(PBUF_LINK, len, PBUF_POOL);    if(p != NULL) {    /* We iterate over the pbuf chain until we have read the entire       packet into the pbuf. */    for(q = p; q != NULL; q = q->next) {      /* Read enough bytes to fill this pbuf in the chain. The         avaliable data in the pbuf is given by the q->len         variable. */      read data into(q->payload, q->len);    }    acknowledge that packet has been read();#ifdef LINK_STATS    stats.link.recv++;#endif /* LINK_STATS */        } else {    drop packet();#ifdef LINK_STATS    stats.link.memerr++;    stats.link.drop++;#endif /* LINK_STATS */        }  return p;  }/*-----------------------------------------------------------------------------------*//* * ethernetif_output(): * * This function is called by the TCP/IP stack when an IP packet * should be sent. It calls the function called low_level_output() to * do the actuall transmission of the packet. * *//*-----------------------------------------------------------------------------------*/static err_tethernetif_output(struct netif *netif, struct pbuf *p,		  struct ip_addr *ipaddr){  struct ethernetif *ethernetif;  struct pbuf *q;  struct eth_hdr *ethhdr;  struct eth_addr *dest, mcastaddr;  struct ip_addr *queryaddr;  err_t err;  u8_t i;    ethernetif = netif->state;  /* Make room for Ethernet header. */  if(pbuf_header(p, 14) != 0) {    /* The pbuf_header() call shouldn't fail, but we allocate an extra       pbuf just in case. */    q = pbuf_alloc(PBUF_LINK, 14, PBUF_RAM);    if(q == NULL) {#ifdef LINK_STATS      stats.link.drop++;      stats.link.memerr++;#endif /* LINK_STATS */            return ERR_MEM;    }    pbuf_chain(q, p);    p = q;  }  /* Construct Ethernet header. Start with looking up deciding which     MAC address to use as a destination address. Broadcasts and     multicasts are special, all other addresses are looked up in the     ARP table. */  queryaddr = ipaddr;  if(ip_addr_isany(ipaddr) ||     ip_addr_isbroadcast(ipaddr, &(netif->netmask))) {    dest = (struct eth_addr *)&ethbroadcast;  } else if(ip_addr_ismulticast(ipaddr)) {    /* Hash IP multicast address to MAC address. */    mcastaddr.addr[0] = 0x01;    mcastaddr.addr[1] = 0x0;    mcastaddr.addr[2] = 0x5e;    mcastaddr.addr[3] = ip4_addr2(ipaddr) & 0x7f;    mcastaddr.addr[4] = ip4_addr3(ipaddr);    mcastaddr.addr[5] = ip4_addr4(ipaddr);    dest = &mcastaddr;  } else {    if(ip_addr_maskcmp(ipaddr, &(netif->ip_addr), &(netif->netmask))) {      /* Use destination IP address if the destination is on the same         subnet as we are. */      queryaddr = ipaddr;    } else {      /* Otherwise we use the default router as the address to send         the Ethernet frame to. */      queryaddr = &(netif->gw);    }    dest = arp_lookup(queryaddr);  }  /* If the arp_lookup() didn't find an address, we send out an ARP     query for the IP address. */  if(dest == NULL) {    q = arp_query(netif, ethernetif->ethaddr, queryaddr);    if(q != NULL) {      err = low_level_output(ethernetif, q);      pbuf_free(q);      return err;    }#ifdef LINK_STATS    stats.link.drop++;    stats.link.memerr++;#endif /* LINK_STATS */              return ERR_MEM;  }  ethhdr = p->payload;  for(i = 0; i < 6; i++) {    ethhdr->dest.addr[i] = dest->addr[i];    ethhdr->src.addr[i] = ethernetif->ethaddr->addr[i];  }    ethhdr->type = htons(ETHTYPE_IP);    return low_level_output(ethernetif, p);}/*-----------------------------------------------------------------------------------*//* * ethernetif_input(): * * This function should be called when a packet is ready to be read * from the interface. It uses the function low_level_input() that * should handle the actual reception of bytes from the network * interface. * *//*-----------------------------------------------------------------------------------*/static voidethernetif_input(struct netif *netif){  struct ethernetif *ethernetif;  struct eth_hdr *ethhdr;  struct pbuf *p;  ethernetif = netif->state;    p = low_level_input(ethernetif);  if(p != NULL) {#ifdef LINK_STATS    stats.link.recv++;#endif /* LINK_STATS */    ethhdr = p->payload;        switch(htons(ethhdr->type)) {    case ETHTYPE_IP:      arp_ip_input(netif, p);      pbuf_header(p, -14);      netif->input(p, netif);      break;    case ETHTYPE_ARP:      p = arp_arp_input(netif, ethernetif->ethaddr, p);      if(p != NULL) {	low_level_output(ethernetif, p);	pbuf_free(p);      }      break;    default:      pbuf_free(p);      break;    }  }}/*-----------------------------------------------------------------------------------*/static voidarp_timer(void *arg){  arp_tmr();  sys_timeout(ARP_TMR_INTERVAL, (sys_timeout_handler)arp_timer, NULL);}/*-----------------------------------------------------------------------------------*//* * ethernetif_init(): * * Should be called at the beginning of the program to set up the * network interface. It calls the function low_level_init() to do the * actual setup of the hardware. * *//*-----------------------------------------------------------------------------------*/voidethernetif_init(struct netif *netif){  struct ethernetif *ethernetif;      ethernetif = mem_malloc(sizeof(struct ethernetif));  netif->state = ethernetif;  netif->name[0] = IFNAME0;  netif->name[1] = IFNAME1;  netif->output = ethernetif_output;  netif->linkoutput = low_level_output;    ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]);    low_level_init(netif);  arp_init();  sys_timeout(ARP_TMR_INTERVAL, (sys_timeout_handler)arp_timer, NULL);}/*-----------------------------------------------------------------------------------*/

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -