ssc

unix v7是最后一个广泛发布的研究型UNIX版本

.SH
Appendix C: An Advanced Example
.PP
This Appendix gives an example of a grammar using some
of the advanced features discussed in Section 10.
The desk calculator example in Appendix A is
modified to provide a desk calculator that
does floating point interval arithmetic.
The calculator understands floating point
constants, the arithmetic operations +, \-, *, /,
unary \-, and = (assignment), and has 26 floating
point variables, ``a'' through ``z''.
Moreover, it also understands
.I intervals ,
written
.DS
	( x , y )
.DE
where
.I x
is less than or equal to
.I y .
There are 26 interval valued variables ``A'' through ``Z''
that may also be used.
The usage is similar to that in Appendix A; assignments
return no value, and print nothing, while expressions print
the (floating or interval) value.
.PP
This example explores a number of interesting features
of Yacc and C.
Intervals are represented by a structure, consisting of the
left and right endpoint values, stored as
.I double 's.
This structure is given a type name, INTERVAL, by using
.I typedef .
The Yacc value stack can also contain floating point scalars, and
integers (used to index into the arrays holding the variable values).
Notice that this entire strategy depends strongly on being able to
assign structures and unions in C.
In fact, many of the actions call functions that return structures
as well.
.PP
It is also worth noting the use of YYERROR to handle error conditions:
division by an interval containing 0, and an interval presented in
the wrong order.
In effect, the error recovery mechanism of Yacc is used to throw away the
rest of the offending line.
.PP
In addition to the mixing of types on the value stack,
this grammar also demonstrates an interesting use of syntax to
keep track of the type (e.g. scalar or interval) of intermediate
expressions.
Note that a scalar can be automatically promoted to an interval if
the context demands an interval value.
This causes a large number of conflicts when the grammar is run through
Yacc: 18 Shift/Reduce and 26 Reduce/Reduce.
The problem can be seen by looking at the two input lines:
.DS
	2.5 + ( 3.5 \- 4. )
.DE
and
.DS
	2.5 + ( 3.5 , 4. )
.DE
Notice that the 2.5 is to be used in an interval valued expression
in the second example, but this fact is not known until
the ``,'' is read; by this time, 2.5 is finished, and the parser cannot go back
and change its mind.
More generally, it might be necessary to look ahead an arbitrary number of
tokens to decide whether to convert a scalar to an interval.
This problem is evaded by having two rules for each binary interval
valued operator: one when the left operand is a scalar, and one when
the left operand is an interval.
In the second case, the right operand must be an interval,
so the conversion will be applied automatically.
Despite this evasion, there are still many cases where the
conversion may be applied or not, leading to the above
conflicts.
They are resolved by listing the rules that yield scalars first
in the specification file; in this way, the conflicts will
be resolved in the direction of keeping scalar
valued expressions scalar valued until they are forced to become
intervals.
.PP
This way of handling multiple types is very instructive, but not very general.
If there were many kinds of expression types, instead of just two,
the number of rules needed would increase dramatically, and the conflicts
even more dramatically.
Thus, while this example is instructive, it is better practice in a
more normal programming language environment to
keep the type information as part of the value, and not as part
of the grammar.
.PP
Finally, a word about the lexical analysis.
The only unusual feature is the treatment of floating point constants.
The C library routine
.I atof
is used to do the actual conversion from a character string
to a double precision value.
If the lexical analyzer detects an error,
it responds by returning a token that
is illegal in the grammar, provoking a syntax error
in the parser, and thence error recovery.
.DS L

%{

#  include  <stdio.h>
#  include  <ctype.h>

typedef  struct  interval  {
	double  lo,  hi;
	}  INTERVAL;

INTERVAL  vmul(),  vdiv();

double  atof();

double  dreg[ 26 ];
INTERVAL  vreg[ 26 ];

%}

%start    lines

%union    {
	int  ival;
	double  dval;
	INTERVAL  vval;
	}

%token  <ival>  DREG  VREG	/*  indices  into  dreg,  vreg  arrays  */

%token  <dval>  CONST		/*  floating  point  constant  */

%type  <dval>  dexp		/*  expression  */

%type  <vval>  vexp		/*  interval  expression  */

	/*  precedence  information  about  the  operators  */

%left	\'+\'  \'\-\'
%left	\'*\'  \'/\'
%left	UMINUS        /*  precedence  for  unary  minus  */

%%

lines	:	/*  empty  */
	|	lines  line
	;

line	:	dexp  \'\en\'
			{	printf(  "%15.8f\en",  $1  );  }
	|	vexp  \'\en\'
			{	printf(  "(%15.8f  ,  %15.8f  )\en",  $1.lo,  $1.hi  );  }
	|	DREG  \'=\'  dexp  \'\en\'
			{	dreg[$1]  =  $3;  }
	|	VREG  \'=\'  vexp  \'\en\'
			{	vreg[$1]  =  $3;  }
	|	error  \'\en\'
			{	yyerrok;  }
	;

dexp	:	CONST
	|	DREG
			{	$$  =  dreg[$1];  }
	|	dexp  \'+\'  dexp
			{	$$  =  $1  +  $3;  }
	|	dexp  \'\-\'  dexp
			{	$$  =  $1  \-  $3;  }
	|	dexp  \'*\'  dexp
			{	$$  =  $1  *  $3;  }
	|	dexp  \'/\'  dexp
			{	$$  =  $1  /  $3;  }
	|	\'\-\'  dexp	%prec  UMINUS
			{	$$  =  \- $2;  }
	|	\'(\'  dexp  \')\'
			{	$$  =  $2;  }
	;

vexp	:	dexp
			{	$$.hi  =  $$.lo  =  $1;  }
	|	\'(\'  dexp  \',\'  dexp  \')\'
			{
			$$.lo  =  $2;
			$$.hi  =  $4;
			if(  $$.lo  >  $$.hi  ){
				printf(  "interval  out  of  order\en"  );
				YYERROR;
				}
			}
	|	VREG
			{	$$  =  vreg[$1];    }
	|	vexp  \'+\'  vexp
			{	$$.hi  =  $1.hi  +  $3.hi;
				$$.lo  =  $1.lo  +  $3.lo;    }
	|	dexp  \'+\'  vexp
			{	$$.hi  =  $1  +  $3.hi;
				$$.lo  =  $1  +  $3.lo;    }
	|	vexp  \'\-\'  vexp
			{	$$.hi  =  $1.hi  \-  $3.lo;
				$$.lo  =  $1.lo  \-  $3.hi;    }
	|	dexp  \'\-\'  vexp
			{	$$.hi  =  $1  \-  $3.lo;
				$$.lo  =  $1  \-  $3.hi;    }
	|	vexp  \'*\'  vexp
			{	$$  =  vmul(  $1.lo,  $1.hi,  $3  );  }
	|	dexp  \'*\'  vexp
			{	$$  =  vmul(  $1,  $1,  $3  );  }
	|	vexp  \'/\'  vexp
			{	if(  dcheck(  $3  )  )  YYERROR;
				$$  =  vdiv(  $1.lo,  $1.hi,  $3  );  }
	|	dexp  \'/\'  vexp
			{	if(  dcheck(  $3  )  )  YYERROR;
				$$  =  vdiv(  $1,  $1,  $3  );  }
	|	\'\-\'  vexp	%prec  UMINUS
			{	$$.hi  =  \-$2.lo;    $$.lo  =  \-$2.hi;    }
	|	\'(\'  vexp  \')\'
			{	$$  =  $2;  }
	;

%%

#  define  BSZ  50        /*  buffer  size  for  floating  point  numbers  */

	/*  lexical  analysis  */

yylex(){
	register  c;

	while(  (c=getchar())  ==  \' \'  ){  /*  skip  over  blanks  */  }

	if(  isupper(  c  )  ){
		yylval.ival  =  c  \-  \'A\';
		return(  VREG  );
		}
	if(  islower(  c  )  ){
		yylval.ival  =  c  \-  \'a\';
		return(  DREG  );
		}

	if(  isdigit(  c  )  ||  c==\'.\'  ){
		/*  gobble  up  digits,  points,  exponents  */

		char  buf[BSZ+1],  *cp  =  buf;
		int  dot  =  0,  exp  =  0;

		for(  ;  (cp\-buf)<BSZ  ;  ++cp,c=getchar()  ){

			*cp  =  c;
			if(  isdigit(  c  )  )  continue;
			if(  c  ==  \'.\'  ){
				if(  dot++  ||  exp  )  return(  \'.\'  );    /*  will  cause  syntax  error  */
				continue;
				}

			if(  c  ==  \'e\'  ){
				if(  exp++  )  return(  \'e\'  );    /*  will  cause  syntax  error  */
				continue;
				}

			/*  end  of  number  */
			break;
			}
		*cp  =  \'\e0\';
		if(  (cp\-buf)  >=  BSZ  )  printf(  "constant  too  long:  truncated\en"  );
		else  ungetc(  c,  stdin  );    /*  push  back  last  char  read  */
		yylval.dval  =  atof(  buf  );
		return(  CONST  );
		}
	return(  c  );
	}

INTERVAL  hilo(  a,  b,  c,  d  )  double  a,  b,  c,  d;  {
	/*  returns  the  smallest  interval  containing  a,  b,  c,  and  d  */
	/*  used  by  *,  /  routines  */
	INTERVAL  v;

	if(  a>b  )  {  v.hi  =  a;    v.lo  =  b;  }
	else  {  v.hi  =  b;    v.lo  =  a;  }

	if(  c>d  )  {
		if(  c>v.hi  )  v.hi  =  c;
		if(  d<v.lo  )  v.lo  =  d;
		}
	else  {
		if(  d>v.hi  )  v.hi  =  d;
		if(  c<v.lo  )  v.lo  =  c;
		}
	return(  v  );
	}

INTERVAL  vmul(  a,  b,  v  )  double  a,  b;    INTERVAL  v;  {
	return(  hilo(  a*v.hi,  a*v.lo,  b*v.hi,  b*v.lo  )  );
	}

dcheck(  v  )  INTERVAL  v;  {
	if(  v.hi  >=  0.  &&  v.lo  <=  0.  ){
		printf(  "divisor  interval  contains  0.\en"  );
		return(  1  );
		}
	return(  0  );
	}

INTERVAL  vdiv(  a,  b,  v  )  double  a,  b;    INTERVAL  v;  {
	return(  hilo(  a/v.hi,  a/v.lo,  b/v.hi,  b/v.lo  )  );
	}
.DE
.bp