main.c

ARM7的一些试验程序

#include "option.h"
#include "def.h"
#include "44b.h"
#include "44blib.h"

void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);      
void HaltDabort(void);

void Main(void)
{char aa;
    U8 which_key;		

    rSYSCFG=SYSCFG_8KB;
#if (PLLON==1)
    ChangePllValue(PLL_M,PLL_P,PLL_S);
#endif

    Isr_Init();
    Port_Init();
    Uart_Init(0,115200);
    Uart_Select(0);
     Uart_Printf("\n*                            杭州莱顿电子                               *");
	Uart_Printf("\n*                     -S3C44B0X功能部件:键盘实验测试-                    *");
	Uart_Printf("\n*                            Version 1.1                                 *");    
	Uart_Printf("\n*                        Email:[e-mail]                            *");
	Uart_Printf("\n*             UART Config--COM:115.2kbps,8Bit,NP,UART0                   *");
	Uart_Printf("\n*------------------Begin to Start 键盘实验测试,OK? (Y/N)-----------------*");
Uart_Printf("\n");
    aa= Uart_Getch();
	if((aa=='Y')||(aa=='y'))
	
    rPCONG=0x00ff;	//EINT7~0
    rPUPG=0x0;		//pull up enable    

    Uart_Printf("\n start \n");
     while(1)
    {
    	while((rPDATG & 0xf0)==0xf0);
    	which_key=rPDATG&0xf0;
        switch(which_key)
        {
    	case 0xe0:
    	    Led_Display(0x1);
    	    Uart_Printf("\n 键盘1 \n");
    	    break;
    	case 0xd0:
    	    Led_Display(0x2);
    	    Uart_Printf("\n 键盘2 \n");
    	    break;
    	case 0xb0:
    	    Led_Display(0x4);
    	    Uart_Printf("\n 键盘3 \n");
    	    break;
    	case 0x70:
    	    Led_Display(0x7);
    	    Uart_Printf("\n 键盘4 \n");
    	    break;
    	default :
    	    break;
        }
    }
}

void Isr_Init(void)
{
    U32 i;
    
    pISR_UNDEF=(unsigned)HaltUndef;
    pISR_SWI  =(unsigned)HaltSwi;
    pISR_PABORT=(unsigned)HaltPabort;
    pISR_DABORT=(unsigned)HaltDabort;
    
     for(i=_RAM_STARTADDRESS;i<(_RAM_STARTADDRESS+0x20);i+=4)
    {
	*((volatile unsigned *)i)=0xEA000000+0x1FFE;
    }

    rINTCON=0x5;	  // Non-vectored,IRQ enable,FIQ disable    

    rINTMOD=0x0;	  // All=IRQ mode
    rINTMSK|=BIT_GLOBAL|BIT_EINT3;	  // All interrupt is masked.
}


void HaltUndef(void)
{
    Uart_Printf("Undefined instruction exception!!!\n");
    while(1);
}

void HaltSwi(void)
{
    Uart_Printf("SWI exception!!!\n");
    while(1);
}

void HaltPabort(void)
{
    Uart_Printf("Pabort exception!!!\n");
    while(1);
}

void HaltDabort(void)
{
    Uart_Printf("Dabort exception!!!\n");
    while(1);
}