📄 pci.c
字号:
/* * (C) Copyright 2001 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <ppcboot.h>#include <ppc4xx.h>#include <asm/processor.h>/* PCI Registers. */#define PCI_VENDOR_ID 0x00#define PCI_COMMAND 0x04#define PCI_CLASS_REVISION 0x08#define PCI_LATENCY_TIMER 0x0d#define PCI_BASE_ADDRESS_0 0x10#define PCI_BASE_ADDRESS_1 0x14#define PCI_BASE_ADDRESS_2 0x18#define PCI_CFDA_PSM 0x43#define PCI_COMMAND_IO 0x1#define PCI_COMMAND_MEM 0x2#define PCI_COMMAND_MASTER 0x4#define CBIO_MASK -128u_long pci9054_iobase;#define PCI_PRIMARY_CAR (0x500000dc) /* PCI config address reg */#define PCI_PRIMARY_CDR (0x80000000) /* PCI config data reg *//*-----------------------------------------------------------------------------+| Subroutine: PCI_Read_CFG_Reg| Description: Read a PCI configuration register| Inputs:| BusDevFunc PCI Bus+Device+Function number| Reg Configuration register number| Width Number of bytes to read (1, 2, or 4)| Return value:| (unsigned int) Value of the configuration register read.| For reads shorter than 4 bytes, return value| is LSB-justified+-----------------------------------------------------------------------------*/unsigned int PCI_Read_CFG_Reg(int BusDevFunc, int Reg, int Width){ unsigned long conAdrVal; unsigned long val; unsigned long Value; /* generate coded value for CON_ADR register */ conAdrVal = BusDevFunc | (Reg & 0xfc) | 0x80000000; /* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */ *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal; /* Note: *pResult comes back as -1 if machine check happened */ val = in32r(PCI_PRIMARY_CDR); /* shift to position */ switch (Width) { case 1: val >>= ((Reg & 0x03) * 8); val &= 0xff; Value = (unsigned char) val; break; case 2: val >>= ((Reg & (int)(0x02) ) * 8); val &= 0xffff; Value = (unsigned short) val; break; case 4: Value = (unsigned long) val; break; } out32r(PCI_PRIMARY_CAR, 0); if ((*(unsigned long *)0x50000304) & 0x60000000) { /* clear pci master/target abort bits */ *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304; } return (Value);}/*-----------------------------------------------------------------------------+| Subroutine: PCI_Write_CFG_Reg| Description: Write a PCI configuration register.| Inputs:| BusDevFunc PCI Bus+Device+Function number| Reg Configuration register number| Value Configuration register value| Width Number of bytes to write (1, 2, or 4)| Return value:| 0 Successful| Updated for pass2 errata #6. Need to disable interrupts and clear the| PCICFGADR reg after writing the PCICFGDATA reg.+-----------------------------------------------------------------------------*/int PCI_Write_CFG_Reg(int BusDevFunc, int Reg, unsigned int Value, int Width){ unsigned long conAdrVal; unsigned long val; conAdrVal = BusDevFunc | (Reg & 0xfc) | 0x80000000; /* shift to position */ { unsigned long ldata; int mask; val = PCI_Read_CFG_Reg(BusDevFunc, Reg & ~3, 4); switch (Width) { case 1: mask = 0x000000ff; ldata = (((unsigned long)Value) & mask) << ((Reg & (int)0x03) * 8); mask <<= ((Reg & 0x03) * 8); Value = (val & ~mask) | ldata; break; case 2: mask = 0x0000ffff; ldata = (((unsigned long)Value) & mask) << ((Reg & (int)0x02) * 8); mask <<= ((Reg & (int)0x02) * 8); Value = (val & ~mask) | ldata; break; case 4: break; } } *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal; out32r(PCI_PRIMARY_CDR, Value); out32r(PCI_PRIMARY_CAR, 0); /* clear pci master/target abort bits */ *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304; return (0);}
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -