📄 ar405.c
字号:
/* * (C) Copyright 2001 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <ppcboot.h>#include "ar405.h"#include <asm/processor.h>#include <command.h>#include <cmd_boot.h>/* ------------------------------------------------------------------------- */#if 0#define FPGA_DEBUG#endif/* fpga configuration data - generated by bin2cc */const unsigned char fpgadata[] ={#include "fpgadata.c"};/* * include common fpga code (for esd boards) */#include "../common/fpga.c"int board_pre_init (void){ int index, len, i;#ifdef FPGA_DEBUG /* set up serial port with default baudrate */ serial_init(0, CONFIG_BAUDRATE); console_init_f();#endif /* * Boot onboard FPGA */ if (fpga_boot_compressed() != 0) { /* booting FPGA failed */#ifndef FPGA_DEBUG /* set up serial port with default baudrate */ serial_init(0, CONFIG_BAUDRATE); console_init_f();#endif printf("\nFPGA: Booting failed!\n "); /* display infos on fpgaimage */ index = 15; for (i=0; i<4; i++) { len = fpgadata[index]; printf("FPGA: %s\n", &(fpgadata[index+1])); index += len+3; } putc ('\n'); /* delayed reboot */ for (i=20; i>0; i--) { printf("Rebooting in %2d seconds \r",i); for (index=0;index<1000;index++) udelay(1000); } putc ('\n'); do_reset(NULL, NULL, 0, 0, NULL); } /* * IRQ 0-15 405GP internally generated; active high; level sensitive * IRQ 16 405GP internally generated; active low; level sensitive * IRQ 17-24 RESERVED * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */ mtdcr(uictr, 0x10000000); /* set int trigger levels */ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ *(ushort *)0xf03000ec = 0x0fff; /* enable all interrupts in fpga */ return 0;}/* ------------------------------------------------------------------------- *//* * Check Board Identity: */int checkboard (void){ unsigned char *s = getenv("serial#"); unsigned char *e; int i; int index; int len; if (!s || strncmp(s, "AR405", 5)) { printf ("### No HW ID - assuming AR405"); } else { for (e=s; *e; ++e) { if (*e == ' ') break; } for ( ; s<e; ++s) { putc (*s); } } printf("\nFPGA: "); /* display infos on fpgaimage */ index = 15; for (i=0; i<4; i++) { len = fpgadata[index]; printf("%s ", &(fpgadata[index+1])); index += len+3; } putc ('\n'); return (0);}/* ------------------------------------------------------------------------- */long int initdram (int board_type){ return (16 * 1024*1024);}/* ------------------------------------------------------------------------- */int testdram (void){ /* TODO: XXX XXX XXX */ printf ("test: 16 MB - ok\n"); return (0);}/* ------------------------------------------------------------------------- */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -