landzo

【开源】线性CCD自适应性算法攻略

/*---------------------------------------------------------------------------/
/  FatFs - FAT file system module include file  R0.09     (C)ChaN, 2011
/----------------------------------------------------------------------------/
/ FatFs module is a generic FAT file system module for small embedded systems.
/ This is a free software that opened for education, research and commercial
/ developments under license policy of following trems.
/
/  Copyright (C) 2011, ChaN, all right reserved.
/
/ * The FatFs module is a free software and there is NO WARRANTY.
/ * No restriction on use. You can use, modify and redistribute it for
/   personal, non-profit or commercial product UNDER YOUR RESPONSIBILITY.
/ * Redistributions of source code must retain the above copyright notice.
/
/----------------------------------------------------------------------------*/

#ifndef _FATFS
#define _FATFS	6502	/* Revision ID */

#ifdef __cplusplus
extern "C" {
#endif

#include "integer.h"	/* Basic integer types */
#include "ffconf.h"		/* FatFs configuration options */

#if _FATFS != _FFCONF
#error Wrong configuration file (ffconf.h).
#endif



    /* Definitions of volume management */

#if _MULTI_PARTITION		/* Multiple partition configuration */
    typedef struct
    {
        BYTE pd;	/* Physical drive number */
        BYTE pt;	/* Partition: 0:Auto detect, 1-4:Forced partition) */
    } PARTITION;
    extern PARTITION VolToPart[];	/* Volume - Partition resolution table */
#define LD2PD(vol) (VolToPart[vol].pd)	/* Get physical drive number */
#define LD2PT(vol) (VolToPart[vol].pt)	/* Get partition index */

#else						/* Single partition configuration */
#define LD2PD(vol) (vol)	/* Each logical drive is bound to the same physical drive number */
#define LD2PT(vol) 0		/* Always mounts the 1st partition or in SFD */

#endif



    /* Type of path name strings on FatFs API */

#if _LFN_UNICODE			/* Unicode string */
#if !_USE_LFN
#error _LFN_UNICODE must be 0 in non-LFN cfg.
#endif
#ifndef _INC_TCHAR
    typedef WCHAR TCHAR;
#define _T(x) L ## x
#define _TEXT(x) L ## x
#endif

#else						/* ANSI/OEM string */
#ifndef _INC_TCHAR
    typedef char TCHAR;
#define _T(x) x
#define _TEXT(x) x
#endif

#endif




    /* File system object structure (FATFS) */
    typedef struct
    {
        BYTE	fs_type;		/* FAT子类型，一般在mount时用，置0表示未挂载*/
        BYTE	drv;			/* 物理驱动号，一般为0*/
        BYTE	csize;			/* 每个簇的扇区数目(1,2,4...128) */
        BYTE	n_fats;			/* 文件分配表的数目(1,2) */
        /*FAT文件系统依次为：引导扇区、两个文件分配表、根目录区和数据区*/
        BYTE	wflag;			/* 标记文件是否被改动过，为1时要回写*/
        BYTE	fsi_flag;		/* 标记文件系统信息是否被改动过，为1时要回写*/
        WORD	id;				/* 文件系统挂载ID */
        WORD	n_rootdir;		/* 根目录区入口(目录项)的个数(用于FAT12/16)*/
#if _MAX_SS != 512
        WORD	ssize;			/* 每扇区的字节数(用于扇区大于512Byte的flash) */
#endif
#if _FS_REENTRANT
        _SYNC_t	sobj;			/* 允许重入，即定义同步对象，用在tiny中*/
#endif
#if !_FS_READONLY
        DWORD	last_clust;		/* 最后一个被分配的簇*/
        DWORD	free_clust;		/* 空闲簇的个数*/
        DWORD	fsi_sector;		/* 存放fsinfo的扇区(用于FAT32) */
#endif
#if _FS_RPATH
        DWORD	cdir;			/* 允许相对路径时用，存储当前目录起始簇(0:root)*/
#endif
        DWORD	n_fatent;		/* FAT入口数(簇的数目 + 2)*/
        DWORD	fsize;			/* 每个FAT所占扇区*/
        DWORD	fatbase;		/* FAT起始扇区*/
        DWORD	dirbase;		/* 根目录起始扇区(FAT32:Cluster#) */
        DWORD	database;		/* 数据目录起始扇区*/
        DWORD	winsect;		/* 当前缓冲区中存储的扇区号*/
        BYTE	win[_MAX_SS];	/* 单个扇区缓存*/
    } FATFS;




    /* File object structure (FIL) */

    typedef struct
    {
        FATFS	*fs;				/* 所在的fs指针*/
        WORD	id;				/* 所在的fs挂载编号*/
        BYTE	flag;			/* 文件状态*/
        BYTE	pad1;           /* 不知道含义，也未见程序使用*/
        DWORD	fptr;			/* 文件读写指针*/
        DWORD	fsize;			/* 大小*/
        DWORD	sclust;			/* 文件起始簇(fsize=0时为0) */
        DWORD	clust;			/* 当前簇*/
        DWORD	dsect;			/* 当前数据扇区*/
#if !_FS_READONLY
        DWORD	dir_sect;		/* 包含目录项的扇区 */
        BYTE	*dir_ptr;		/* Ponter to the directory entry in the window */
#endif
#if _USE_FASTSEEK
        DWORD	*cltbl;			/*指向簇链接映射表的指针*/
#endif
#if _FS_SHARE
        UINT	lockid;			/* File lock ID (index of file semaphore table) */
#endif
#if !_FS_TINY
        BYTE	buf[_MAX_SS];	/* File data read/write buffer */
#endif
    } FIL;



    /* Directory object structure (DIR) */

    typedef struct
    {
        FATFS	*fs;				/* 同上*/
        WORD	id;
        WORD	index;			/* 当前读写索引号 */
        DWORD	sclust;			/* 文件数据区开始簇*/
        DWORD	clust;			/* 当前簇*/
        DWORD	sect;			/* 当前扇区*/
        BYTE	*dir;			/* 扇区缓存中当前SFN入口指针，SFN含义未知，猜测和LFN类似，与文件名相关*/
        BYTE	*fn;				/* Pointer to the SFN (in/out) {file[8],ext[3],status[1]} */
#if _USE_LFN
        WCHAR	*lfn;			/* Pointer to the LFN working buffer */
        WORD	lfn_idx;		/* Last matched LFN index number (0xFFFF:No LFN) */
#endif
    } DIR;




    /* File status structure (FILINFO) */

    typedef struct
    {
        DWORD	fsize;			/* File size */
        WORD	fdate;			/* Last modified date */
        WORD	ftime;			/* Last modified time */
        BYTE	fattrib;		/* Attribute */
        TCHAR	fname[13];		/* Short file name (8.3 format) */
#if _USE_LFN
        TCHAR	*lfname;			/* Pointer to the LFN buffer */
        UINT 	lfsize;			/* Size of LFN buffer in TCHAR */
#endif
    } FILINFO;



    /* File function return code (FRESULT) */

    typedef enum
    {
        FR_OK = 0,				/* (0) Succeeded */
        FR_DISK_ERR,			/* (1) A hard error occured in the low level disk I/O layer */
        FR_INT_ERR,				/* (2) Assertion failed */
        FR_NOT_READY,			/* (3) The physical drive cannot work */
        FR_NO_FILE,				/* (4) Could not find the file */
        FR_NO_PATH,				/* (5) Could not find the path */
        FR_INVALID_NAME,		/* (6) The path name format is invalid */
        FR_DENIED,				/* (7) Acces denied due to prohibited access or directory full */
        FR_EXIST,				/* (8) Acces denied due to prohibited access */
        FR_INVALID_OBJECT,		/* (9) The file/directory object is invalid */
        FR_WRITE_PROTECTED,		/* (10) The physical drive is write protected */
        FR_INVALID_DRIVE,		/* (11) The logical drive number is invalid */
        FR_NOT_ENABLED,			/* (12) The volume has no work area */
        FR_NO_FILESYSTEM,		/* (13) There is no valid FAT volume */
        FR_MKFS_ABORTED,		/* (14) The f_mkfs() aborted due to any parameter error */
        FR_TIMEOUT,				/* (15) Could not get a grant to access the volume within defined period */
        FR_LOCKED,				/* (16) The operation is rejected according to the file shareing policy */
        FR_NOT_ENOUGH_CORE,		/* (17) LFN working buffer could not be allocated */
        FR_TOO_MANY_OPEN_FILES,	/* (18) Number of open files > _FS_SHARE */
        FR_INVALID_PARAMETER	/* (19) Given parameter is invalid */
    } FRESULT;



    /*--------------------------------------------------------------*/
    /* FatFs module application interface                           */

    FRESULT f_mount (BYTE, FATFS *);						/* Mount/Unmount a logical drive */
    FRESULT f_open (FIL *, const TCHAR *, BYTE);			/* Open or create a file */
    FRESULT f_read (FIL *, void *, UINT, UINT *);			/* Read data from a file */
    FRESULT f_lseek (FIL *, DWORD);						/* Move file pointer of a file object */
    FRESULT f_close (FIL *);								/* Close an open file object */
    FRESULT f_opendir (DIR *, const TCHAR *);				/* Open an existing directory */
    FRESULT f_readdir (DIR *, FILINFO *);					/* Read a directory item */
    FRESULT f_stat (const TCHAR *, FILINFO *);			/* Get file status */
    FRESULT f_write (FIL *, const void *, UINT, UINT *);	/* Write data to a file */
    FRESULT f_getfree (const TCHAR *, DWORD *, FATFS **);	/* Get number of free clusters on the drive */
    FRESULT f_truncate (FIL *);							/* Truncate file */
    FRESULT f_sync (FIL *);								/* Flush cached data of a writing file */
    FRESULT f_unlink (const TCHAR *);					/* Delete an existing file or directory */
    FRESULT	f_mkdir (const TCHAR *);						/* Create a new directory */
    FRESULT f_chmod (const TCHAR *, BYTE, BYTE);			/* Change attriburte of the file/dir */
    FRESULT f_utime (const TCHAR *, const FILINFO *);		/* Change timestamp of the file/dir */
    FRESULT f_rename (const TCHAR *, const TCHAR *);		/* Rename/Move a file or directory */
    FRESULT f_chdrive (BYTE);							/* Change current drive */
    FRESULT f_chdir (const TCHAR *);						/* Change current directory */
    FRESULT f_getcwd (TCHAR *, UINT);					/* Get current directory */
    FRESULT f_forward (FIL *, UINT( *)(const BYTE *, UINT), UINT, UINT *);	/* Forward data to the stream */
    FRESULT f_mkfs (BYTE, BYTE, UINT);					/* Create a file system on the drive */
    FRESULT	f_fdisk (BYTE, const DWORD[], void *);		/* Divide a physical drive into some partitions */
    int f_putc (TCHAR, FIL *);							/* Put a character to the file */
    int f_puts (const TCHAR *, FIL *);					/* Put a string to the file */
    int f_printf (FIL *, const TCHAR *, ...);				/* Put a formatted string to the file */
    TCHAR *f_gets (TCHAR *, int, FIL *);					/* Get a string from the file */

#define f_eof(fp) (((fp)->fptr == (fp)->fsize) ? 1 : 0)
#define f_error(fp) (((fp)->flag & FA__ERROR) ? 1 : 0)
#define f_tell(fp) ((fp)->fptr)
#define f_size(fp) ((fp)->fsize)

#ifndef EOF
#define EOF (-1)
#endif




    /*--------------------------------------------------------------*/
    /* Additional user defined functions                            */

    /* RTC function */
#if !_FS_READONLY
    DWORD get_fattime (void);
#endif

    /* Unicode support functions */
#if _USE_LFN						/* Unicode - OEM code conversion */
    WCHAR ff_convert (WCHAR, UINT);		/* OEM-Unicode bidirectional conversion */
    WCHAR ff_wtoupper (WCHAR);			/* Unicode upper-case conversion */
#if _USE_LFN == 3					/* Memory functions */
    void *ff_memalloc (UINT);			/* Allocate memory block */
    void ff_memfree (void *);			/* Free memory block */
#endif
#endif

    /* Sync functions */
#if _FS_REENTRANT
    int ff_cre_syncobj (BYTE, _SYNC_t *); /* Create a sync object */
    int ff_req_grant (_SYNC_t);			/* Lock sync object */
    void ff_rel_grant (_SYNC_t);		/* Unlock sync object */
    int ff_del_syncobj (_SYNC_t);		/* Delete a sync object */
#endif




    /*--------------------------------------------------------------*/
    /* Flags and offset address                                     */


    /* File access control and file status flags (FIL.flag) */

#define	FA_READ				0x01
#define	FA_OPEN_EXISTING	0x00
#define FA__ERROR			0x80

#if !_FS_READONLY
#define	FA_WRITE			0x02
#define	FA_CREATE_NEW		0x04
#define	FA_CREATE_ALWAYS	0x08
#define	FA_OPEN_ALWAYS		0x10
#define FA__WRITTEN			0x20
#define FA__DIRTY			0x40
#endif


    /* FAT sub type (FATFS.fs_type) */

#define FS_FAT12	1
#define FS_FAT16	2
#define FS_FAT32	3


    /* File attribute bits for directory entry */

#define	AM_RDO	0x01	/* Read only */
#define	AM_HID	0x02	/* Hidden */
#define	AM_SYS	0x04	/* System */
#define	AM_VOL	0x08	/* Volume label */
#define AM_LFN	0x0F	/* LFN entry */
#define AM_DIR	0x10	/* Directory */
#define AM_ARC	0x20	/* Archive */
#define AM_MASK	0x3F	/* Mask of defined bits */


    /* Fast seek feature */
#define CREATE_LINKMAP	0xFFFFFFFF



    /*--------------------------------*/
    /* Multi-byte word access macros  */

#if _WORD_ACCESS == 1	/* Enable word access to the FAT structure */
#define	LD_WORD(ptr)		(WORD)(*(WORD*)(BYTE*)(ptr))
#define	LD_DWORD(ptr)		(DWORD)(*(DWORD*)(BYTE*)(ptr))
#define	ST_WORD(ptr,val)	*(WORD*)(BYTE*)(ptr)=(WORD)(val)
#define	ST_DWORD(ptr,val)	*(DWORD*)(BYTE*)(ptr)=(DWORD)(val)
#else					/* Use byte-by-byte access to the FAT structure */
#define	LD_WORD(ptr)		(WORD)(((WORD)*((BYTE*)(ptr)+1)<<8)|(WORD)*(BYTE*)(ptr))
#define	LD_DWORD(ptr)		(DWORD)(((DWORD)*((BYTE*)(ptr)+3)<<24)|((DWORD)*((BYTE*)(ptr)+2)<<16)|((WORD)*((BYTE*)(ptr)+1)<<8)|*(BYTE*)(ptr))
#define	ST_WORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8)
#define	ST_DWORD(ptr,val)	*(BYTE*)(ptr)=(BYTE)(val); *((BYTE*)(ptr)+1)=(BYTE)((WORD)(val)>>8); *((BYTE*)(ptr)+2)=(BYTE)((DWORD)(val)>>16); *((BYTE*)(ptr)+3)=(BYTE)((DWORD)(val)>>24)
#endif

#ifdef __cplusplus
}
#endif

#endif /* _FATFS */