📄 ozice_d_config.html
字号:
<html>
<head>
<meta HTTP-EQUIV="Htm-Help" Content="ozice_help.html#Main_Contents">
<title>OziExplorerCE Configuration</title>
</head>
<body BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#0000FF" VLINK="#0000FF">
<!-- PegHelp -->
<p><font COLOR="#0000ff"><big><b>Configuration</b></big></font> </p>
<hr size="5" color="#000080">
<ul>
<li><a href="#System">General Settings</a></li>
<li><a href="#Map & Data">Map & Data Files</a></li>
<li><a href="#Map Image">Map Image Files</a></li>
<li><a href="#NMEA">NMEA (GPS)</a></li>
<li><a href="#Moving Map">Moving Map</a></li>
<li><a href="#Track">Tracks</a></li>
<li><a href="#Waypoints">Waypoints</a></li>
<li><a href="#Routes">Routes</a></li>
<li><a href="#Navigation">Navigation</a></li>
<li><a href="#Units">Units</a></li>
<li><a href="#Speed">Speed Monitor</a></li>
</ul>
<hr size="5" color="#000080">
<p><b>Configuration Menu Options</b></p>
<p>
<img src="ozice_cfg_menu.gif" width="217" height="231"
alt="ozice_cfg_menu.gif (4366 bytes)" border="1"></p>
<p>These are the options available to configure OziExplorerCE.</p>
<hr>
<p><font COLOR="#0000ff"><b><a name="System">General Settings</a></b></font></p>
<p><font color="#0000FF"><strong>Operation Settings</strong></font></p>
<p>
<img border="0" src="ozice_cfg_operation.gif" alt="Configure Operation Settings" width="219" height="189"></p>
<p><b>Position Format</b> - How you want the geographic position displayed on the status
line and in other lists. This allows you to select from a list of coordinate formats and
grids.</p>
<p><b>Load Last Map</b> - If this is ticked the last map being used will be loaded when
the software loads. </p>
<p><strong>Load Wp Log</strong> - This will automatically load the waypoint
log file (<strong>ceWaypoints.wpt</strong>) on program start. When creating waypoints in the
software they are automatically logged to the <strong>ceWaypoints.wpt</strong>
file if the Log Waypoints to File menu option on the File / Waypoints menu is
ticked.</p>
<p><strong>Load Track Log</strong> - This will automatically load the track
log file (<strong>ceTrack.plt</strong>) on program start. When in moving map mode (real time
tracking) the track points are automatically logged to the <strong>ceTrack.plt</strong>
file if the Log Track to File menu option on the File / Track Log menu is
ticked.</p>
<p><strong>Toolbar Auto Hide</strong> - Applies to PocketPC's only, this will
automatically hide the toolbar (which is the small toolbar below the menu) when
moving map mode is active, this gives more screen for the map.</p>
<p><font color="#0000FF"><strong>System Settings</strong></font></p>
<p><img border="0" src="ozice_cfg_zoom.gif" width="217" height="189"></p>
<p><b>Extra Map Zooms</b> - These settings allow you to use ozf2 files at
various zoom levels without
including the 75% and 50% zoom levels, this reduces the size of the file
considerably. </p>
<ul>
<li><b>Smooth Zoom </b>- If selected, bilinear filtering used for
smoothing. Slow PDA's may not be able to handle the smooth zoom option.</li>
<li><b>Zoom Levels</b> - If selected, the zoom levels 90%, 80%, 75%, 70%, 60%,
50% and 40%
are created "on the fly" (they do not have to be included in the OZF2 file).</li>
<li>If the 75% and 50% zooms are included in the ozf2 file they will be used in preference to the ones created "on the
fly".</li>
</ul>
<p><img border="0" src="ozice_cfg_other.gif" width="217" height="189"></p>
<p><b>Auto Start GPS Coms</b> - Communication with the GPS will be started
automatically when OziExplorerCE is run.</p>
<p><b>Auto Screen Control</b> - When ticked the Screen Control feature is
automatically activated when communication with the GPS is started.</p>
<p><strong>No ShutDown</strong> - Stops the device from shutting down (suspending) when
running on battery power and communicating with the GPS. This option causes OziExplorerCE
to send a keystroke every 30 seconds which makes the operating system think it is being
used. This does not stop the screen from auto dimming - this must be set in the CE device
System configuration.</p>
<p><b>Show Pixel x,y</b> - When ticked the x, y pixel location of the map image
is displayed in the hint when the stylus is pressed on the map and released
before the popup menu is displayed.</p>
<hr>
<p><a name="Map & Data"><font COLOR="#0000ff"><b>Map & Data Files Configuration</b></font>
</a></p>
<p><img src="ozice_cfg_paths.gif" width="216" height="186" alt="File Paths"></p>
<p><b>Map File Paths (6 Max) </b>- The path to the folders where the maps files are
stored. The first path in the list is used in the Open Map File dialog. All paths are used
when when searching for maps if they are ticked as active. </p>
<p><img src="ozice_b_opendlg.gif" width="15" height="13" alt="Open Dialog"> -
Displays the Get Path Dialog to select your Map or Data file path. Note: OziExplorer file
types (map, wpt, plt, rte) will display icons. An example of the dialog in use is shown
below.</p>
<p><img src="ozice_getpathdlg.gif" width="216" height="250" alt="File Path Dialog"></p>
<p><b>Active</b> - Specifies which Map File Paths are active, only active paths are used
to find maps when using the Map Find function or changing maps in moving map mode. </p>
<p><b>Data File Path </b>- The path (directory/folder) where data files are stored. This
is the default path used when opening and saving data files (waypoints, tracks etc). Any
files which OziExplorer automatically saves are placed in this folder. If no folder is
specified the files are placed in the "root" folder ( \ ).</p>
<hr>
<p><a name="Map Image"><font COLOR="#0000ff"><b>Map Image Files Configuration</b></font> </a></p>
<p><img src="ozice_cfg_image_path.gif" width="216" height="187" alt="Map Image Path"></p>
<p><b>Map Image File Path 1 & 2 </b>- The path to the folder where the map image files
are stored. There are 2 directories and both are checked when a map image is required. The
link to the image path contained within the <strong>.map</strong> file is totally ignored.
2 paths are allowed so you can have 1 path on the device and 1 path on a Flash RAM card
(or anywhere else). Set these path(s) to match the path(s) where you have copied the map
images. Only 1 path need be entered if you are not using both. </p>
<p><img src="ozice_b_opendlg.gif" width="15" height="13" alt="Get Path Dialog"> -
Displays the Get Path Dialog to select your Map Image file path.</p>
<hr>
<p><a name="NMEA"><font COLOR="#0000ff"><b>NMEA (GPS) Configuration</b></font> </a></p>
<p><img src="ozice_cfg_nmea_gps.gif" width="217" height="187" alt="NMEA GPS"></p>
<p><b>Baud</b> - The Baud rate you are using in the GPS. Use as high a Baud rate that your
GPS supports. Most use 4800 only. The Navman GPS sleeve uses a baud rate of
57600.</p>
<p><strong>COM Port</strong> - The COM Port number your CE device is using for
communication with the GPS. The standard serial port on the CE device is Com 1.
<b>Plug in
GPS cards</b> usually use Com 4 or Com 5. The <b>Navman GPS sleeve</b> for iPaqs uses either
Com 4 or Com 5 but there is a also port called <b>Navman</b>, if you are using a
Navman and you select this port
OziExplorerCE will determine the correct com port automatically..</p>
<p><b>Sentence</b> - This is the NMEA sentence which is used to get the position from the
GPS. Other sentences may also be used to obtain additional information not contained in
the selected sentence. If your GPS outputs the GPRMC sentence then this is the preferred
sentence to select. There is also an option for <strong>PVT Garmin</strong> which allows
OziExplorerCE to communicate with Garmin GPS Receivers using PVT mode. To use PVT mode the
following conditions must be met
<ul>
<li>Your Garmin must support the PVT mode (not all do)</li>
<li>The GPS interfce must be set to <strong>Garmin</strong> mode (or GRMN/GRMN)</li>
<li>The Baud rate in OziExplorerCE must be set to 9600</li>
<li>The GPS must be connected and turned on before communiction is started from
OziExplorerCE as commands are sent to the GPS.</li>
</ul>
<p><strong>Use Chk Sum</strong> - The checksum contained in the sentence from your GPS
will be checked. If the checksum is not correct then the sentence is discarded and
the CSM (Checksum) code is displayed on the status line.</p>
<p><strong>Check Valid</strong> - If selected, the valid flag contained in the sentence
from your GPS will be checked and if the reading is not valid it will be discarded.
NF (No Fix) is displayed on the status line if the sentence does not have the valid flag
set on.</p>
<p><b>NMEA Datum</b> - The datum your GPS uses to Output the position in the NMEA data.
Garmins always output in the datum the GPS is set to, Some Magellans (315/320) also output
in the datum the GPS is set to, most other GPS output in WGS 84, you need to find out how
your particular GPS does this. If you see you position on the map is not exactly in the
correct place then this setting may be the cause.</p>
<p><b>Show GPS Fix Data</b> - Shows the type of Fix and the Number of satellites being
tracked on the status line. G = GPS fix, D = DGPS being used.</p>
<p><strong>Say Fix Info</strong> - Information on the GPS satellite fix status will be
voiced.</p>
<p><strong>Show DGPS secs</strong> - Shows the number of seconds on the status line since
the last DGPS update. Only use this if you are using a DGPS.</p>
<p><strong>Tripmate GPS</strong> - Only select this option if you are using a Tripmate
GPS. OziExplorer will automatically send the "ASTRAL" command to start the GPS
and then wait 5 seconds for the GPS to start up.</p>
<hr>
<p><a name="Moving Map"><font color="#0000FF"><strong>Moving Map Configuration</strong></font></a></p>
<p><strong><font color="#0000FF">Operation</font></strong></p>
<p><img border="0" src="ozice_cfg_mm_operation.gif" width="217" height="187"></p>
<p><b>Screen</b><strong> Update</strong> - How often the screen is updated. Example - A
setting of 1 updates on every NMEA sentence, a setting of 2 updates on every 2nd NMEA
sentence. <font color="#FF0000"><b>CAUTION</b></font> - The power of most CE devices is
very low and they cannot process the NMEA sentence, move the map, draw the track etc in
the time between sentences so they lag behind. If this happens set the Update to 2 or 3 or
more to allow more time - this is <font color="#FF0000"><b>IMPORTANT</b></font>. </p>
<p><b>Screen</b><strong> Position</strong> - Sets the position of the "look
ahead" distance in moving map mode. </p>
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -