st72f561.prm

st7单片机关于can总线设计的源程序,使用ST7单片机的很有用

/*
*******************************************************************************
COPYRIGHT 2003 STMicroelectronics
Source File Name : st72f561.prm
Group            : IPSW, CMG - IPDF
Author           : MCD Application Team
Date First Issued: 08/03/2002
********************************Documentation**********************************
General Purpose -  Mapping file 
********************************RevisionHistory********************************
______________________________________________________________________________
Date :08/03/2002                  Release:1.0 
Date :23/09/2003                  Release:2.0 
******************************************************************************/

/* ************ LINKER OUTPUT FILE *******************************************/

LINK can_mwerks.abs

/************ PROJECT MODULE LIST ********************************************/

NAMES	
      main.o                  
      st72f561_reg.o+
      /*io.o
      spi.o 
      itc.o
      wdg.o
      pwmart.o	   
      timer.o 
      adc.o 
      sci.o
      timer8.o 
      mcc.o*/
      can.o
      user.o
      start07.o                                                                       
      ansi.lib           
END                              


/*  STACK INITIALIZATION *****************************************************/

STACKTOP                0x01FF


/* MEMORY LOCATION SETTING ***************************************************/

SECTIONS
  
       ZRAM = NO_INIT    0x0080 TO 0x00FF; 
       RAM  = READ_WRITE 0x0200 TO 0x087F;    
       ROM  = READ_ONLY  0x1000 TO 0xFFDF;


PLACEMENT
         
/******************** PAGES PLACEMENT  ***************************************/
         DEFAULT_ROM,ROM_VAR,STRINGS                    INTO  ROM;
         DEFAULT_RAM                                    INTO  RAM;
         _ZEROPAGE,_OVERLAP                             INTO ZRAM;
/*****************************************************************************/

END

/* INTERRUPT VECTOR SETTING : ADDRESS <-> ROUTINE ****************************/

VECTOR ADDRESS 0xFFFE _Startup
/*VECTOR ADDRESS 0xFFFC TRAP_IT_Routine
VECTOR ADDRESS 0xFFF8 MCC_IT_Routine
VECTOR ADDRESS 0xFFF6 EI0_IT_Routine 
VECTOR ADDRESS 0xFFF4 EI1_IT_Routine 
VECTOR ADDRESS 0xFFF2 EI2_IT_Routine
VECTOR ADDRESS 0xFFF0 EI3_IT_Routine*/

VECTOR ADDRESS 0xFFEE CanRx_ISR
VECTOR ADDRESS 0xFFEC CanTx_ISR

/*VECTOR ADDRESS 0xFFEA SPI_IT_Routine
VECTOR ADDRESS 0xFFE8 TIMER8_IT_Routine
VECTOR ADDRESS 0xFFE6 TIMER16_IT_Routine

VECTOR ADDRESS 0xFFE4 SCI2_IT_Routine
VECTOR ADDRESS 0xFFE2 SCI1_IT_Routine
VECTOR ADDRESS 0xFFE0 PWMART_IT_Routine*/                                      
/*** (c) 2003  ST Microelectronics ****************** END OF FILE ************/