msp430x42x0_ta_03.s43

MSP430F42x0.zip c语言 例程打包

;******************************************************************************
;   MSP430x42x0 Demo - Timer_A, Toggle P1.0, Overflow ISR, DCO SMCLK
;
;   Description: This program toggles P1.0 using software and the Timer_A
;   overflow ISR. In this example an ISR triggers when TA overflows.
;   Inside the ISR P1.0 is toggled. Toggle rate is 16Hz when using default
;   FLL+ register settings and an external 32kHz watch crystal.	
;   ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = default DCO = 32 x ACLK = 1048576Hz
;   //* An external watch crystal between XIN & XOUT is required for ACLK *//	
;
;                MSP430F4270
;             -----------------
;         /|\|              XIN|-
;          | |                 | 32kHz
;          --|RST          XOUT|-
;            |                 |
;            |             P1.0|-->LED
;
;  L. Westlund / S. Karthikeyan
;  Texas Instruments Inc.
;  June 2005
;  Built with IAR Embedded Workbench Version: 3.30A
;******************************************************************************
#include  <msp430x42x0.h>
;------------------------------------------------------------------------------
            ORG     08000h                  ; Program Start
;------------------------------------------------------------------------------
RESET       mov.w   #300h,SP                ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupFLL    bis.b   #XCAP14PF,&FLL_CTL0     ; Configure load caps
SetupP5     bis.b   #001h,&P1DIR            ; P1.0 output
SetupTA     mov.w   #TASSEL_2+MC_2+TAIE,&TACTL  ; SMCLK, cont. mode, interrupt
                                            ;						
Mainloop    bis.w   #CPUOFF+GIE,SR          ; CPU off, interrupts enabled
            nop                             ; Required only for debugger
                                            ;
;------------------------------------------------------------------------------
TAX_ISR;    Common ISR for CCR1-4 and overflow
;------------------------------------------------------------------------------
            add.w   &TAIV,PC                ; Add Timer_A offset vector
            reti                            ; CCR0 - no source
            reti                            ; CCR1
            reti                            ; CCR2
            reti                            ; CCR3
            reti                            ; CCR4
TA_over     xor.b   #001h,&P1OUT            ; Toggle P1.0
            reti                            ; Return from overflow ISR		
                                            ;
;------------------------------------------------------------------------------
;           Interrupt Vectors
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ; RESET Vector
            DW      RESET                   ;
            ORG     0FFEAh                  ; Timer_AX Vector
            DW      TAX_ISR                 ;
            END