msp430x42x0_fll_02.s43

MSP430F42x0.zip c语言 例程打包

;*******************************************************************************
;   MSP430x42x0 Demo - FLL+, Runs Internal DCO at 8MHz
;
;   Description: This program demonstrates setting the internal
;   DCO to run at 8Mhz with auto-calibration by the FLL+.
;   ACLK = LFXT1 = 32768Hz, MCLK = SMCLK = DCO = (121+1) x 2 x ACLK = 7995392Hz
;   //* An external watch crystal between XIN & XOUT is required for ACLK *//	
;
;                MSP430F4270
;             -----------------
;         /|\|              XIN|-
;          | |                 | 32kHz
;          --|RST          XOUT|-
;            |                 |
;            |        P1.1/MCLK|--> MCLK = 8Mhz
;            |                 |
;            |        P1.5/ACLK|--> ACLK = 32kHz
;            |                 |
;
;  L. Westlund / S. Karthikeyan
;  Texas Instruments Inc.
;  June 2005
;  Built with IAR Embedded Workbench Version: 3.30A
;******************************************************************************
#include  <msp430x42x0.h>
;------------------------------------------------------------------------------
            ORG     08000h                  ; Program Start
;------------------------------------------------------------------------------
RESET       mov.w   #300h,SP                ; Initialize stackpointer
SetupWDT    mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupFLL2   bis.b   #FN_3,&SCFI0            ; Set DCO operating range
            bis.b   #DCOPLUS+XCAP14PF,&FLL_CTL0 ; DCO+, configure load caps
            mov.b   #121,&SCFQCTL           ; (121+1) x 2 x 32768 = 7995392Hz
SetupPorts  bis.b   #022h,&P1DIR            ; P1.1 & P1.5 to output direction
            bis.b   #022h,&P1SEL            ; P1.1 & P1.5 to output MCLK & ACLK
                                            ;
Mainloop    jmp     Mainloop                ; Loop with CPU running
                                            ;
;-------------------------------------------------------------------------------
;           Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     0FFFEh                  ; RESET Vector
            DW      RESET                   ;
            END