i8c6i8c6.lst

造纸自动化生产线的s7300程序

"Upper rounding 30";"Upper rounding 30";""
"Upper rounding 40";"Upper rounding 40";""
"Upper rounding 50";"Upper rounding 50";""
"Upper rounding 60";"Upper rounding 60";""
"Upper rounding 70";"Upper rounding 70";""
"Upper rounding 80";"Upper rounding 80";""
"Upper rounding 90";"Upper rounding 90";""
"Upper rounding 100 ..";"Upper rounding 100 ..";""
"Acceleration factor";"Acceleration factor";""
"Deceleration factor";"Deceleration factor";""
"Acceleration, lower rounding";"Acceleration, lower rounding";""
"Deceleration, lower rounding";"Deceleration, lower rounding";""
"Minimum speed of acceleration";"Minimum speed of acceleration";""
"Minimum speed of deceleration";"Minimum speed of deceleration";""
"Maximum speed";"Maximum speed";""
"Upper rounding";"Upper rounding";""
"Driven distance";"Driven distance";""
"Distance to destination";"Distance to destination";""
"Distance to drive (at start)";"Distance to drive (at start)";""
"Acceleration 1, k";"Acceleration 1, k";""
"Acceleration 1, C";"Acceleration 1, C";""
"Acceleration 1, dX";"Acceleration 1, dX";""
"Deceleration 1, k";"Deceleration 1, k";""
"Deceleration 1, C";"Deceleration 1, C";""
"Deceleration 1, dX";"Deceleration 1, dX";""
"Rounding stop place";"Rounding stop place";""
"Maximum speed (to be reached) Vmax'k1";"Maximum speed (to be reached) Vmax'k1";""
"HLi constant";"HLi constant";""
"Maximum speed Vmax'k";"Maximum speed Vmax'k";""
"Acceleration 2, stop place";"Acceleration 2, stop place";""
"Acceleration 2, start place";"Acceleration 2, start place";""
"Acceleration rounding 2, Vo at place Xo2";"Acceleration rounding 2, Vo at place Xo2";""
"Acceleration 2, C";"Acceleration 2, C";""
"Deceleration 2, stop place";"Deceleration 2, stop place";""
"Deceleration 2, start place";"Deceleration 2, start place";""
"Deceleration 2, Vo at place X1h";"Deceleration 2, Vo at place X1h";""
"Acceleration 2, Coh";"Acceleration 2, Coh";""
"Help memory";"Help memory";""
"Absolute encoder data, EM 1SSI -card";"Absolute encoder data, EM 1SSI -card";""
"Assignment of the Feedback Interface (Inputs)";"Assignment of the Feedback Interface (Inputs)";""
"Encoder value double word (bit 31 set when encoder value frozen)";"Encoder value double word (bit 31 set when encoder value frozen)";""
"Encoder rotation direction up";"Encoder rotation direction up";""
"Encoder value latched";"Encoder value latched";""
"Absolute position encoder error";"Absolute position encoder error";""
"Ready for operation";"Ready for operation";""
"Reserved (=0)";"Reserved (=0)";""
"Comparison value 1 reached";"Comparison value 1 reached";""
"Comparison value 2 reached";"Comparison value 2 reached";""
"Assignment of the Control Interface (Outputs)";"Assignment of the Control Interface (Outputs)";""
"Comparison value 1 or 2";"Comparison value 1 or 2";""
"Latch function acknowledgement";"Latch function acknowledgement";""
"Error acknowledgement";"Error acknowledgement";""
"The Status Word for the ABB Drives Communication Profile";"The Status Word for the ABB Drives Communication Profile";""
"Actual value equals reference value (=is within tolerance limits)";"Actual value equals reference value (=is within tolerance limits)";""
"Drive control location: REMOTE (EXT1 or EXT2)";"Drive control location: REMOTE (EXT1 or EXT2)";""
"Actual frequency or speed value => supervision limit (par. 32.03)";"Actual frequency or speed value => supervision limit (par. 32.03)";""
"External Control Location 2 (EXT2) selected";"External Control Location 2 (EXT2) selected";""
"External Run Enable signal received";"External Run Enable signal received";""
"Communication error detected by fieldbus apadter module";"Communication error detected by fieldbus apadter module";""
"Ready to switch on";"Ready to switch on";""
"Ready to operate (=1) / OFF1 Active (=0)";"Ready to operate (=1) / OFF1 Active (=0)";""
"Operation enabled ";"Operation enabled ";""
"Fault (=1) / No fault (=0)";"Fault (=1) / No fault (=0)";""
"OFF2 inactive";"OFF2 inactive";""
"OFF3 inactive";"OFF3 inactive";""
"Switch-on inhibited";"Switch-on inhibited";""
"Warning / Alarm";"Warning / Alarm";""
"Speed feedback";"Speed feedback";""
"Torque feedback (PPO type 4 selected)";"Torque feedback (PPO type 4 selected)";""
"The Control Word for the ABB Drives Communication Profile";"The Control Word for the ABB Drives Communication Profile";""
"Not used";"Not used";""
"Fieldbus control enabled";"Fieldbus control enabled";""
"Speed/torque selection (1=torque) | Select external ctrl loc EXT2(=1)/EXT1(=0)";"Speed/torque selection (1=torque) | Select external ctrl loc EXT2(=1)/EXT1(=0)";""
"Ready to operate (=1) / Emergency OFF (=0)";"Ready to operate (=1) / Emergency OFF (=0)";""
"Continue operation (OFF2 inactive) (=1) / Emergency OFF, coast to stop";"Continue operation (OFF2 inactive) (=1) / Emergency OFF, coast to stop";""
"Continue operation (OFF3 inactive) (=1) / Emergency stop with parameter 22.07";"Continue operation (OFF3 inactive) (=1) / Emergency stop with parameter 22.07";""
"Operation enabled (=1) / Inhibit operation (=0)";"Operation enabled (=1) / Inhibit operation (=0)";""
"Normal operation (=1) / Force Ramp Function Generator output to zero";"Normal operation (=1) / Force Ramp Function Generator output to zero";""
"Enable ramp function (=1) / Halt ramping (Ramp Function output held)";"Enable ramp function (=1) / Halt ramping (Ramp Function output held)";""
"Normal operation (=1) / Force Ramp Function Generator input to zero";"Normal operation (=1) / Force Ramp Function Generator input to zero";""
"Fault reset is an active fault exists";"Fault reset is an active fault exists";""
"Speed reference";"Speed reference";""
"Torque reference (PPO type 4 selected)";"Torque reference (PPO type 4 selected)";""
"Forced crawling forward, needs DBX26.3=1 also";"Forced crawling forward, needs DBX26.3=1 also";""
"Forced crawling backward, needs DBX26.3=1 also";"Forced crawling backward, needs DBX26.3=1 also";""
"Drive start; (one shot, help)";"Drive start; (one shot, help)";""
"Direction change; Forward (one shot)";"Direction change; Forward (one shot)";""
"Direction change; Backward (one shot)";"Direction change; Backward (one shot)";""
"Direction change; Forward (help)";"Direction change; Forward (help)";""
"Direction change; Backward (help)";"Direction change; Backward (help)";""
"New destination calculation";"New destination calculation";""
"New destination calculation (help)";"New destination calculation (help)";""
"Xok, 0.0 ... 100.0";"Xok, 0.0 ... 100.0";""
"Xoh, 0.0 ... 100.0";"Xoh, 0.0 ... 100.0";""
"Z, 0.0 ... 100.0";"Z, 0.0 ... 100.0";""
"Place set point";"Place set point";""
"Encoder value before scaling and place set point";"Encoder value before scaling and place set point";""
"Encoder value after scaling and place set point added ";"Encoder value after scaling and place set point added ";""
"Speed and acceleration calculation";"Speed and acceleration calculation";""
"Gear wheel diameter";"Gear wheel diameter";""
"Calculated speed";"Calculated speed";""
"Calculated acceleration/deceleration";"Calculated acceleration/deceleration";""
"Average of calculated acceleration/deceleration";"Average of calculated acceleration/deceleration";""
"Last acceleration/deceleration values";"Last acceleration/deceleration values";""
"Bits 0-3 = 1 (Coming event), Bits 4-7 = 1 (Event class 1)";"Bits 0-3 = 1 (Coming event), Bits 4-7 = 1 (Event class 1)";""
"1 (Cold restart scan 1 of OB 1), 3 (Scan 2-n of OB 1)";"1 (Cold restart scan 1 of OB 1), 3 (Scan 2-n of OB 1)";""
"Priority of OB Execution";"Priority of OB Execution";""
"1 (Organization block 1, OB1)";"1 (Organization block 1, OB1)";""
"Reserved for system";"Reserved for system";""
"Cycle time of previous OB1 scan (milliseconds)";"Cycle time of previous OB1 scan (milliseconds)";""
"Minimum cycle time of OB1 (milliseconds)";"Minimum cycle time of OB1 (milliseconds)";""
"Maximum cycle time of OB1 (milliseconds)";"Maximum cycle time of OB1 (milliseconds)";""
"Date and time OB1 started";"Date and time OB1 started";""
"16#39, Event class 3, Entering event state, Internal fault event";"16#39, Event class 3, Entering event state, Internal fault event";""
"16#XX, Fault identifcation code";"16#XX, Fault identifcation code";""
"82 (Organization block 82, OB82)";"82 (Organization block 82, OB82)";""
"Input (01010100), Output (01010101)";"Input (01010100), Output (01010101)";""
"Base address of module with fault";"Base address of module with fault";""
"Module defective";"Module defective";""
"Internal fault";"Internal fault";""
"External fault";"External fault";""
"Point information";"Point information";""
"External voltage low";"External voltage low";""
"Field wiring connector missing";"Field wiring connector missing";""
"Module has no configuration data";"Module has no configuration data";""
"Module has configuration error";"Module has configuration error";""
"Type of module";"Type of module";""
"Sub-Module is missing or has error";"Sub-Module is missing or has error";""
"Communication fault";"Communication fault";""
"Module is stopped";"Module is stopped";""
"Watch dog timer stopped module";"Watch dog timer stopped module";""
"Internal power supply fault";"Internal power supply fault";""
"Primary battery is in fault";"Primary battery is in fault";""
"Backup battery is in fault";"Backup battery is in fault";""
"Rack fault, only for bus interface module";"Rack fault, only for bus interface module";""
"Processor fault";"Processor fault";""
"EPROM fault";"EPROM fault";""
"RAM fault";"RAM fault";""
"ADU fault";"ADU fault";""
"Fuse fault";"Fuse fault";""
"Hardware interupt input in fault";"Hardware interupt input in fault";""
"Date and time OB82 started   ";"Date and time OB82 started   ";""
"16#35 Event class 3";"16#35 Event class 3";""
"16#XX, Fault identification code";"16#XX, Fault identification code";""
"85 (Organization block 85, OB85)";"85 (Organization block 85, OB85)";""
"Class of event causing error";"Class of event causing error";""
"Number of event causing error";"Number of event causing error";""
"Priority of OB causing error";"Priority of OB causing error";""
"Number of OB causing error";"Number of OB causing error";""
"Date and time OB85 started   ";"Date and time OB85 started   ";""
"16#38/39 Event class 3";"16#38/39 Event class 3";""
"16#C1/C4/C5, Fault identifcation code";"16#C1/C4/C5, Fault identifcation code";""
"86 (Organization block 86, OB86)";"86 (Organization block 86, OB86)";""
"Base address of IM module in rack with fault";"Base address of IM module in rack with fault";""
"Racks in fault";"Racks in fault";""
"Date and time OB86 started";"Date and time OB86 started";""
"16#25, Event class 2, Entering event state, Internal fault event";"16#25, Event class 2, Entering event state, Internal fault event";""
"16#XX Software programming fault";"16#XX Software programming fault";""
"121 (Organization block 121, OB121)";"121 (Organization block 121, OB121)";""
"16#88/8A/8B/8C/8E Type of block fault occured in";"16#88/8A/8B/8C/8E Type of block fault occured in";""
"16#XX Specific register that caused fault";"16#XX Specific register that caused fault";""