n6c6n6c6.lst

造纸自动化生产线的s7300程序

"V01.00.000"
"$_Languages"
"11(1) Finnish";"9(2) English (United Kingdom)"
"$_Timestamp"
"28.05.2004  15:13:32";"28.05.2004  15:13:32"
"$_Typ(NetworkComment)"
"To use clock pulse 'Clock Memory' must be taken in use.

In HW Config open CPU module's properties and enable 'Clock Memory'
and set used 'Memory Byte' to 2

M2.0 = C100ms = Clock pulse 100ms (50ms ON, 50ms OFF)";"To use clock pulse 'Clock Memory' must be taken in use.

In HW Config open CPU module's properties and enable 'Clock Memory'
and set used 'Memory Byte' to 2

M2.0 = C100ms = Clock pulse 100ms (50ms ON, 50ms OFF)"
"FI - P滗ohjelma (FC1)
S  - Huvudprogram (FC1)";"FI - P滗ohjelma (FC1)
S  - Huvudprogram (FC1)"
"Also to manual mode if one of safety photocell lines is not OK or safety gates 
emergency open is pressed";"Also to manual mode if one of safety photocell lines is not OK or safety gates 
emergency open is pressed"
"================================================================================
";"================================================================================
"
"DB3.DBB0 ... 56  

Before resetting safety gates open requests are stored,
and after resetting open requests are restored.";"DB3.DBB0 ... 56  

Before resetting safety gates open requests are stored,
and after resetting open requests are restored."
"
  MOTOR ALARMS
 ==============
";"
  MOTOR ALARMS
 ==============
"
"M101";"M101"
"M102";"M102"
"M103";"M103"
"M105
";"M105
"
"M092
";"M092
"
"M095
";"M095
"
"M107
";"M107
"
"M109
";"M109
"
"M110
Husum; 952MU332-U1";"M110
Husum; 952MU332-U1"
"M111
";"M111
"
"M112
";"M112
"
"M113
";"M113
"
"M114
";"M114
"
"M115
";"M115
"
"M119
";"M119
"
"M124";"M124"
"M130


No feedback from wheel selection contactors";"M130


No feedback from wheel selection contactors"
"M131
";"M131
"
"M132
";"M132
"
"M143
";"M143
"
"M144
Husum; 952FN682-M1";"M144
Husum; 952FN682-M1"
"M145
Husum; 952HE683-R1";"M145
Husum; 952HE683-R1"
"M146
";"M146
"
"M157
";"M157
"
"
  ALARM AT ROLL CONTROL
 =======================
";"
  ALARM AT ROLL CONTROL
 =======================
"
"Make green light blinking only if an alarm that stops the machine exist";"Make green light blinking only if an alarm that stops the machine exist"
"Safety gates opening
--------------------
Safety gate opens when there is a open request and all stations are ready for it
(lockings are made at each station main program).
(gates opens also if e-stop or e-opening is pressed)

Safety gates locking
--------------------
Safety gate closes when requested and feedback from lock is got 


AND

 all MANUAL/AUTO -switches are on AUTO
 

 OR

 in case that there is an opening request but gates are still locked
 ";"Safety gates opening
--------------------
Safety gate opens when there is a open request and all stations are ready for it
(lockings are made at each station main program).
(gates opens also if e-stop or e-opening is pressed)

Safety gates locking
--------------------
Safety gate closes when requested and feedback from lock is got 


AND

 all MANUAL/AUTO -switches are on AUTO
 

 OR

 in case that there is an opening request but gates are still locked
 "
"Obs ! Interlockings are only in stations main programs. ";"Obs ! Interlockings are only in stations main programs. "
"Frequency converter switching on:
Three times during five minute period.
";"Frequency converter switching on:
Three times during five minute period.
"
"Freq.converters always on except if gates are closed more than 3 times
during 5 minute. In that case have to wait that time goes off and
conveters can be started again.
";"Freq.converters always on except if gates are closed more than 3 times
during 5 minute. In that case have to wait that time goes off and
conveters can be started again.
"
"Wrapping             Normal wrapping
Address              warehouse
Wrapping layers      2.0 rounds 
Wrapper type         blanco
Innermarkking        no
inner/outerheads     standard
bodylabel            no
endlabel             no";"Wrapping             Normal wrapping
Address              warehouse
Wrapping layers      2.0 rounds 
Wrapper type         blanco
Innermarkking        no
inner/outerheads     standard
bodylabel            no
endlabel             no"
"Message change RoAd => wrapping machines logic
================================================================================
";"Message change RoAd => wrapping machines logic
================================================================================
"
"Viesti RoAd:lta";"Message from RoAd"
"Result of roll data verification";"Result of roll data verification"
"Roll data transfer";"Roll data transfer"
"Message change wrapping machine logic => RoAd
================================================================================
";"Message change wrapping machine logic => RoAd
================================================================================
"
"Printteri p滗ll