bthcomm.h

通过AT命令对串口蓝牙模块进行通信控制操作

#define uint 	unsigned int
#define uchar 	unsigned char
#define WD_Reset TA=0xAA;TA=0x55;RWT = 1;

xdata char  PDAMACAdd[10][12];
xdata char	RecvBuf[150];
xdata char  SendBuf[150];
xdata char	RecvBuf1[150];
xdata char  SendBuf1[150];

xdata char  time;

xdata uchar	CommCnt;
xdata uchar	CommCnt1;
xdata uchar Count;

xdata char sendlen,sendlen1;

bit 	Tag;

extern  bit	 	RecvOk;
extern  bit 	Recving;

extern  bit	 	RecvOk1;
extern  bit 	Recving1;
extern  xdata char	ComLen1;
extern  xdata char  ComLen;

unsigned char xdata second,minute,second1;

void series0_send_char(char *p);
void series0_send_array(char *pc);
char series0_recv_char(void);
void series0_recv_array(void);

void series1_send_char(char *p);
void series1_send_array(char *pc);

char BthDevInq(void);
bit  LinkBth(char i);
void BthDisconnect(void);
void BthReset(void);
bit  Bthlinking(void);
bit  Addrmatch(char n);

void serier1_send_NoRep(void);

char * strnfind(char * p1, char * p2, char n);

void uart1_interrupt(void);
void uart2_interrupt(void);


xdata uchar	DeviceCoun;
struct BthDevice
{
	uchar	DeviceNum[2];
	uchar	DeviceAdd[12];
}BD[10];