makefile.in

开放gsl矩阵运算

	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
	done

install-m4dataDATA: $(m4data_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(m4datadir)
	@list='$(m4data_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(m4datadir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(m4datadir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(m4datadir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(m4datadir)/$$p; \
	  fi; fi; \
	done

uninstall-m4dataDATA:
	@$(NORMAL_UNINSTALL)
	list='$(m4data_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(m4datadir)/$$p; \
	done

install-pkgconfigDATA: $(pkgconfig_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(pkgconfigdir)
	@list='$(pkgconfig_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgconfigdir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkgconfigdir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(pkgconfigdir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(pkgconfigdir)/$$p; \
	  fi; fi; \
	done

uninstall-pkgconfigDATA:
	@$(NORMAL_UNINSTALL)
	list='$(pkgconfig_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(pkgconfigdir)/$$p; \
	done

install-pkgincludeHEADERS: $(pkginclude_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(pkgincludedir)
	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgincludedir)/$$p"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgincludedir)/$$p; \
	done

uninstall-pkgincludeHEADERS:
	@$(NORMAL_UNINSTALL)
	list='$(pkginclude_HEADERS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(pkgincludedir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
gsl-histogram.o: gsl-histogram.c config.h gsl/gsl_histogram.h
gsl-randist.o: gsl-randist.c config.h gsl/gsl_randist.h gsl/gsl_rng.h \
	gsl/gsl_errno.h gsl/gsl_test.h
version.lo version.o : version.c config.h gsl_version.h

check-TESTS: $(TESTS)
	@failed=0; all=0; \
	srcdir=$(srcdir); export srcdir; \
	for tst in $(TESTS); do \
	  if test -f $$tst; then dir=.; \
	  else dir="$(srcdir)"; fi; \
	  if $(TESTS_ENVIRONMENT) $$dir/$$tst; then \
	    all=`expr $$all + 1`; \
	    echo "PASS: $$tst"; \
	  elif test $$? -ne 77; then \
	    all=`expr $$all + 1`; \
	    failed=`expr $$failed + 1`; \
	    echo "FAIL: $$tst"; \
	  fi; \
	done; \
	if test "$$failed" -eq 0; then \
	  banner="All $$all tests passed"; \
	else \
	  banner="$$failed of $$all tests failed"; \
	fi; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"; \
	test "$$failed" -eq 0
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_SCRIPTS)
	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-libLTLIBRARIES install-binPROGRAMS \
		install-binSCRIPTS
install-exec: install-exec-recursive

install-data-am: install-m4dataDATA install-pkgconfigDATA \
		install-pkgincludeHEADERS
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-libLTLIBRARIES uninstall-binPROGRAMS \
		uninstall-binSCRIPTS uninstall-m4dataDATA \
		uninstall-pkgconfigDATA uninstall-pkgincludeHEADERS
uninstall: uninstall-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
		$(HEADERS) config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(libdir) $(DESTDIR)$(bindir) \
		$(DESTDIR)$(bindir) $(DESTDIR)$(m4datadir) \
		$(DESTDIR)$(pkgconfigdir) $(DESTDIR)$(pkgincludedir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-hdr mostlyclean-libLTLIBRARIES \
		mostlyclean-compile mostlyclean-libtool \
		mostlyclean-binPROGRAMS mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-libLTLIBRARIES clean-compile clean-libtool \
		clean-binPROGRAMS clean-tags clean-generic \
		mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-libLTLIBRARIES distclean-compile \
		distclean-libtool distclean-binPROGRAMS distclean-tags \
		distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr \
		maintainer-clean-libLTLIBRARIES \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-binPROGRAMS maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \
clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \
uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \
distclean-compile clean-compile maintainer-clean-compile \
mostlyclean-libtool distclean-libtool clean-libtool \
maintainer-clean-libtool mostlyclean-binPROGRAMS distclean-binPROGRAMS \
clean-binPROGRAMS maintainer-clean-binPROGRAMS uninstall-binPROGRAMS \
install-binPROGRAMS uninstall-binSCRIPTS install-binSCRIPTS \
uninstall-m4dataDATA install-m4dataDATA uninstall-pkgconfigDATA \
install-pkgconfigDATA uninstall-pkgincludeHEADERS \
install-pkgincludeHEADERS install-data-recursive \
uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir check-TESTS \
info-am info dvi-am dvi check check-am installcheck-am installcheck \
all-recursive-am install-exec-am install-exec install-data-am \
install-data install-am install uninstall-am uninstall all-redirect \
all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


#bin_PROGRAMS = main dummy
#dummy_SOURCES = version.c
#dummy_LDADD = $(SUBLIBS)
#main_SOURCES = version.c env.c
#main_LDADD = libgsl.la

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: