qqq_opt.bak

c8051f320 i/o配置例子,刚接触交叉开关的同志们也许需要这个

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,335544321,0,1,1,0,<..\Untitled.c><Untitled.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,229,255,255,255,66,0,0,0,78,0,0,0,4,4,0,0,177,1,0,0 }

ExtF <..\Untitled.asm> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,229,255,255,255,22,0,0,0,26,0,0,0,212,3,0,0,121,1,0,0 }
ExtF <C:\Keil\C51\INC\c8051F320.inc> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,229,255,255,255,44,0,0,0,52,0,0,0,238,3,0,0,151,1,0,0 }
ExtF <C:\KEIL\C51\INC\CYGNAL\C8051F320.H> 1,4,0,{ 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,229,255,255,255,88,0,0,0,104,0,0,0,26,4,0,0,203,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=25000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\SILABS\C8051F32X.PDF>
  OPTBL 1,(Data Short)<DATASHTS\SILABS\C8051F320_SHORT.PDF>
  OPTDL (S8051.DLL)()(DCYG.DLL)(-pCYGF320)(S8051.DLL)()(TCYG.DLL)(-pCYGF320)
  OPTDBG 44030,-1,()()()()()()()()()() (BIN\SiC8051F.dll)()()()
  OPTKEY 0,(DLGTCYG)((98=-1,-1,-1,-1,0)(5097=-1,-1,-1,-1,0)(5098=-1,-1,-1,-1,0)(5099=-1,-1,-1,-1,0)(5100=-1,-1,-1,-1,0)(5101=-1,-1,-1,-1,0)(99=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(5104=-1,-1,-1,-1,0)(5103=-1,-1,-1,-1,0)(95=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(5108=-1,-1,-1,-1,0)(5111=-1,-1,-1,-1,0)(5105=-1,-1,-1,-1,0)(5106=-1,-1,-1,-1,0)(5061=-1,-1,-1,-1,0)(5102=-1,-1,-1,-1,0)(5095=-1,-1,-1,-1,0))
  OPTKEY 0,(SiC8051F)(-S1 -B115200 -O1793 -J0 -K0 -L0 -M0 -A3 -P1 -T0 -UEC300001F5D)
  OPTDF 0x86
  OPTLE <>
  OPTLC <>
EndOpt