startup.ls1

PHILIPS LPC935 MCU 利用其8路AD转换器,对监测对象进行数据采集,然后通过UART将采集到的数据发送到PC上位机

A51 MACRO ASSEMBLER  STARTUP                                                              09/08/2005 22:25:30 PAGE     1


MACRO ASSEMBLER A51 V7.09
OBJECT MODULE PLACED IN StartUP.OBJ
ASSEMBLER INVOKED BY: C:\Keil\C51\BIN\A51.EXE StartUP.src PR(.\StartUP.ls1) EP DEBUG

LOC  OBJ            LINE     SOURCE

                       1     ; .\StartUP.SRC generated from: StartUP.C
                       2     ; COMPILER INVOKED BY:
                       3     ;        C:\Keil\C51\BIN\C51.EXE StartUP.C LARGE OPTIMIZE(0,SPEED) BROWSE DEBUG OBJECTEXTEN
                             D SRC(.\StartUP.SRC)
                       4     
                       5     
                       6     NAME    STARTUP
                       7     
                       8     ; #pragma asm
  001F                 9             BOOTVEC EQU 0x1F  ; points to ISP entry point (default on unprogrammed part)
  0000                10             BOOTSTAT EQU 0x00 ; enables ISP entry on power-up (default on unprogrammed part)
  0000                11             SEC0 EQU 0      ;
  0000                12             SEC1 EQU 0      ; 
  0000                13             SEC2 EQU 0      ; 
  0000                14             SEC3 EQU 0      ; 
  0000                15             SEC4 EQU 0      ; 
  0000                16             SEC5 EQU 0      ; 
  0000                17             SEC6 EQU 0      ; 
  0000                18             SEC7 EQU 0              ;
  00B3                19           _UCFG1 EQU 0xB3 ;  //0x23;
  0000                20             _UCFG2 EQU 0    ;
                      21       
----                  22             CSEG    AT      0FF00H
FF00 B3               23             DB      _UCFG1          ; place UCFG Bytes in hex file
FF01 00               24               DB      _UCFG2          ; reserved for future use
FF02 1F               25               DB      BOOTVEC
FF03 00               26               DB      BOOTSTAT
FF04 00               27               DB      SEC0
FF05 00               28               DB      SEC1
FF06 00               29               DB      SEC2
FF07 00               30               DB      SEC3
FF08 00               31               DB      SEC4
FF09 00               32               DB      SEC5
FF0A 00               33               DB      SEC6
FF0B 00               34               DB      SEC7
                      35             END
A51 MACRO ASSEMBLER  STARTUP                                                              09/08/2005 22:25:30 PAGE     2

SYMBOL TABLE LISTING
------ ----- -------


N A M E             T Y P E  V A L U E   ATTRIBUTES

BOOTSTAT . . . . .  N NUMB   0000H   A   
BOOTVEC. . . . . .  N NUMB   001FH   A   
SEC0 . . . . . . .  N NUMB   0000H   A   
SEC1 . . . . . . .  N NUMB   0000H   A   
SEC2 . . . . . . .  N NUMB   0000H   A   
SEC3 . . . . . . .  N NUMB   0000H   A   
SEC4 . . . . . . .  N NUMB   0000H   A   
SEC5 . . . . . . .  N NUMB   0000H   A   
SEC6 . . . . . . .  N NUMB   0000H   A   
SEC7 . . . . . . .  N NUMB   0000H   A   
STARTUP. . . . . .  N NUMB   -----       
_UCFG1 . . . . . .  N NUMB   00B3H   A   
_UCFG2 . . . . . .  N NUMB   0000H   A   


REGISTER BANK(S) USED: 0 


ASSEMBLY COMPLETE.  0 WARNING(S), 0 ERROR(S)