commrtos.c

本源码是ucos-II实时操作系统下的串口中间件程序

/*
*********************************************************************************************************
*                                     Embedded Systems Building Blocks
*                                  Complete and Ready-to-Use Modules in C
*
*                                    Asynchronous Serial Communications
*                                           Buffered Serial I/O 
*                                                 (RTOS)
*
*                            (c) Copyright 1999, Jean J. Labrosse, Weston, FL
*                                           All Rights Reserved
*
* Filename   : COMMRTOS.C
* Programmer : Jean J. Labrosse
*********************************************************************************************************
*/

/*
*********************************************************************************************************
*                                               INCLUDES
*********************************************************************************************************
*/

#include "includes.h"

/*$PAGE*/
/*
*********************************************************************************************************
*                                               CONSTANTS
*********************************************************************************************************
*/

/*
*********************************************************************************************************
*                                               DATA TYPES
*********************************************************************************************************
*/

typedef struct {
    INT16U     RingBufRxCtr;                /* Number of characters in the Rx ring buffer              */
    OS_EVENT  *RingBufRxSem;                /* Pointer to Rx semaphore                                 */
    INT8U     *RingBufRxInPtr;              /* Pointer to where next character will be inserted        */
    INT8U     *RingBufRxOutPtr;             /* Pointer from where next character will be extracted     */
    INT8U      RingBufRx[COMM_RX_BUF_SIZE]; /* Ring buffer character storage (Rx)                      */
    INT16U     RingBufTxCtr;                /* Number of characters in the Tx ring buffer              */
    OS_EVENT  *RingBufTxSem;                /* Pointer to Tx semaphore                                 */
    INT8U     *RingBufTxInPtr;              /* Pointer to where next character will be inserted        */
    INT8U     *RingBufTxOutPtr;             /* Pointer from where next character will be extracted     */
    INT8U      RingBufTx[COMM_TX_BUF_SIZE]; /* Ring buffer character storage (Tx)                      */
} COMM_RING_BUF;

/*
*********************************************************************************************************
*                                            GLOBAL VARIABLES
*********************************************************************************************************
*/

COMM_RING_BUF  Comm1Buf;
COMM_RING_BUF  Comm2Buf;

/*$PAGE*/
/*
*********************************************************************************************************
*                                    REMOVE CHARACTER FROM RING BUFFER
*
*
* Description : This function is called by your application to obtain a character from the communications
*               channel.  The function will wait for a character to be received on the serial channel or
*               until the function times out.
* Arguments   : 'ch'    is the COMM port channel number and can either be:
*                           COMM1
*                           COMM2
*               'to'    is the amount of time (in clock ticks) that the calling function is willing to
*                       wait for a character to arrive.  If you specify a timeout of 0, the function will
*                       wait forever for a character to arrive.
*               'err'   is a pointer to where an error code will be placed:
*                           *err is set to COMM_NO_ERR     if a character has been received
*                           *err is set to COMM_RX_TIMEOUT if a timeout occurred
*                           *err is set to COMM_BAD_CH     if you specify an invalid channel number
* Returns     : The character in the buffer (or NUL if a timeout occurred)
*********************************************************************************************************
*/

INT8U  CommGetChar (INT8U ch, INT16U to, INT8U *err)
{
    INT8U          c;
    INT8U          oserr;
    COMM_RING_BUF *pbuf;


    switch (ch) {                                          /* Obtain pointer to communications channel */
        case COMM1:
             pbuf = &Comm1Buf;
             break;

        case COMM2:
             pbuf = &Comm2Buf;
             break;

        default:
             *err = COMM_BAD_CH;
             return (NUL);
    }
    OSSemPend(pbuf->RingBufRxSem, to, &oserr);             /* Wait for character to arrive             */
    if (oserr == OS_TIMEOUT) {                             /* See if characters received within timeout*/
        *err = COMM_RX_TIMEOUT;                            /* No, return error code                    */
        return (NUL);
    } else {
        OS_ENTER_CRITICAL();
        pbuf->RingBufRxCtr--;                              /* Yes, decrement character count           */
        c = *pbuf->RingBufRxOutPtr++;                      /* Get character from buffer                */
        if (pbuf->RingBufRxOutPtr == &pbuf->RingBufRx[COMM_RX_BUF_SIZE]) {     /* Wrap OUT pointer     */
            pbuf->RingBufRxOutPtr = &pbuf->RingBufRx[0];
        }
        OS_EXIT_CRITICAL();
        *err = COMM_NO_ERR;
        return (c);
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                  GET TX CHARACTER FROM RING BUFFER
*
*
* Description : This function is called by the Tx ISR to extract the next character from the Tx buffer.
*               The function returns FALSE if the buffer is empty after the character is extracted from
*               the buffer.  This is done to signal the Tx ISR to disable interrupts because this is the
*               last character to send.
* Arguments   : 'ch'    is the COMM port channel number and can either be:
*                           COMM1
*                           COMM2
*               'err'   is a pointer to where an error code will be deposited:
*                           *err is set to COMM_NO_ERR         if at least one character was available
*                                                              from the buffer.
*                           *err is set to COMM_TX_EMPTY       if the Tx buffer is empty.
*                           *err is set to COMM_BAD_CH         if you have specified an incorrect channel
* Returns     : The next character in the Tx buffer or NUL if the buffer is empty.
*********************************************************************************************************
*/

INT8U  CommGetTxChar (INT8U ch, INT8U *err)
{
    INT8U          c;
    COMM_RING_BUF *pbuf;


    switch (ch) {                                          /* Obtain pointer to communications channel */
        case COMM1:
             pbuf = &Comm1Buf;
             break;

        case COMM2:
             pbuf = &Comm2Buf;
             break;

        default:
             *err = COMM_BAD_CH;
             return (NUL);
    }
    if (pbuf->RingBufTxCtr > 0) {                          /* See if buffer is empty                   */
        pbuf->RingBufTxCtr--;                              /* No, decrement character count            */
        c = *pbuf->RingBufTxOutPtr++;                      /* Get character from buffer                */
        if (pbuf->RingBufTxOutPtr == &pbuf->RingBufTx[COMM_TX_BUF_SIZE]) {     /* Wrap OUT pointer     */
            pbuf->RingBufTxOutPtr = &pbuf->RingBufTx[0];
        }
        OSSemPost(pbuf->RingBufTxSem);                     /* Indicate that character will be sent     */
        *err = COMM_NO_ERR;
        return (c);                                        /* Characters are still available           */
    } else {
        *err = COMM_TX_EMPTY;
        return (NUL);                                      /* Buffer is empty                          */
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                  INITIALIZE COMMUNICATIONS MODULE
*
*
* Description : This function is called by your application to initialize the communications module.  You
*               must call this function before calling any other functions.
* Arguments   : none
*********************************************************************************************************
*/

void  CommInit (void)
{
    COMM_RING_BUF *pbuf;


    pbuf                  = &Comm1Buf;                     /* Initialize the ring buffer for COMM1     */
    pbuf->RingBufRxCtr    = 0;
    pbuf->RingBufRxInPtr  = &pbuf->RingBufRx[0];
    pbuf->RingBufRxOutPtr = &pbuf->RingBufRx[0];
    pbuf->RingBufRxSem    = OSSemCreate(0);
    pbuf->RingBufTxCtr    = 0;
    pbuf->RingBufTxInPtr  = &pbuf->RingBufTx[0];
    pbuf->RingBufTxOutPtr = &pbuf->RingBufTx[0];
    pbuf->RingBufTxSem    = OSSemCreate(COMM_TX_BUF_SIZE);