gui_touch_driveranalog.c

来自「一个自己编译0通过的绝对能用的GUI移植到44B0」· C语言 代码 · 共 302 行

/*
*********************************************************************************************************
*                                                uC/GUI
*                        Universal graphic software for embedded applications
*
*                       (c) Copyright 2002, Micrium Inc., Weston, FL
*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH
*
*              礐/GUI is protected by international copyright laws. Knowledge of the
*              source code may not be used to write a similar product. This file may
*              only be used in accordance with a license and should not be redistributed
*              in any way. We appreciate your understanding and fairness.
*
----------------------------------------------------------------------
File        : GUITOUCH.C
Purpose     : Touch screen manager
----------------------------------------------------------------------
This module handles the touch screen. It is configured in the file
GUITouch.conf.h (Should be located in the Config\ directory).
----------------------------------------------------------------------
*/


#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "LCD_Private.H"      /* private modul definitions & config */
#include "GUI_Protected.h"

/* Generate code only if configuration says so ! */
#if GUI_SUPPORT_TOUCH

#include "GUITouchconf.h"    /* Located in GUIx, will include GUITouch.conf.h */

#include "44b.h"
#include "ads7843.h"

/*
**********************************************************************
*
*          Config defaults
*
**********************************************************************
*/
#ifndef GUI_TOUCH_AD_LEFT      /* max value returned by AD-converter */
  #define GUI_TOUCH_AD_LEFT 270   
#endif

#ifndef GUI_TOUCH_AD_RIGHT      /* min value returned by AD-converter */
  #define GUI_TOUCH_AD_RIGHT 3800    
#endif

#ifndef GUI_TOUCH_AD_TOP       /* max value returned by AD-converter */
  #define GUI_TOUCH_AD_TOP 250
#endif

#ifndef GUI_TOUCH_AD_BOTTOM      /* min value returned by AD-converter */
  #define GUI_TOUCH_AD_BOTTOM 3680
#endif

#ifndef GUI_TOUCH_SWAP_XY    /* Is XY of touch swapped ? */
  #define GUI_TOUCH_SWAP_XY 0
#endif

#ifndef GUI_TOUCH_MIRROR_X
  #define GUI_TOUCH_MIRROR_X 0
#endif

#ifndef GUI_TOUCH_MIRROR_Y
  #define GUI_TOUCH_MIRROR_Y 1
#endif

#ifndef GUI_TOUCH_YSIZE
  #define GUI_TOUCH_YSIZE LCD_YSIZE
#endif

#ifndef GUI_TOUCH_XSIZE
  #define GUI_TOUCH_XSIZE LCD_XSIZE
#endif

/*
**********************************************************************
*
*          Config check
*
**********************************************************************
*/

/*
  *****************************************************************
  *                                                               *
  *              Global data                                      *
  *                                                               *
  *****************************************************************

The global data below is for debugging purposes only. A "clean"
application should not use these values for any other purpose.
NEVER write into these values !
*/


//int GUI_TOUCH_yPhys, GUI_TOUCH_xPhys;

/****************************************************************
*
*       Static data
*
*****************************************************************
*/

typedef struct {int Min; int Max; } tMinMax;

static tMinMax xyMinMax[2] = {
#if ((GUI_TOUCH_SWAP_XY==0) && (GUI_TOUCH_MIRROR_X==0)) || ((GUI_TOUCH_SWAP_XY) && (GUI_TOUCH_MIRROR_Y==0))
  { GUI_TOUCH_AD_LEFT, GUI_TOUCH_AD_RIGHT },
#else
  { GUI_TOUCH_AD_RIGHT, GUI_TOUCH_AD_LEFT },
#endif
#if ((GUI_TOUCH_SWAP_XY==0) && (GUI_TOUCH_MIRROR_Y==0)) || ((GUI_TOUCH_SWAP_XY) && (GUI_TOUCH_MIRROR_X==0))
  { GUI_TOUCH_AD_TOP,  GUI_TOUCH_AD_BOTTOM }
#else
  { GUI_TOUCH_AD_BOTTOM,  GUI_TOUCH_AD_TOP }
#endif
};

#ifndef WIN32
static int xMin;
static int xMax;
static int yMin;
static int yMax;
#endif

/*********************************************************************
*
*       Convert physical value into (logical) coordinates
*/
int AD2X(int adx) {
  I32 r = adx - xyMinMax[GUI_COORD_X].Min;
  r *= GUI_TOUCH_XSIZE - 1;
  return r / (xyMinMax[GUI_COORD_X].Max - xyMinMax[GUI_COORD_X].Min);    
}

int AD2Y(int ady) {
  I32 r = ady - xyMinMax[GUI_COORD_Y].Min;
  r *= GUI_TOUCH_YSIZE - 1;
  return r/(xyMinMax[GUI_COORD_Y].Max - xyMinMax[GUI_COORD_Y].Min);    
}

/*********************************************************************
*
*        Diagnostic routines
*/
int  GUI_TOUCH_GetxPhys(void) {
	if(!TP_IRQ)
		return Read_X();
	else
		return -1; //GUI_TOUCH_xPhys;
}

int  GUI_TOUCH_GetyPhys(void) {
	if(!TP_IRQ)
		return Read_Y();
	else
		return -1; //GUI_TOUCH_xPhys;
}


/*********************************************************************
*
*              SetDefaultCalibration
*/

void GUI_TOUCH_SetDefaultCalibration(void) {
  xyMinMax[0].Min = GUI_TOUCH_AD_LEFT;
  xyMinMax[0].Max = GUI_TOUCH_AD_RIGHT;
  xyMinMax[1].Min = GUI_TOUCH_AD_TOP;
  xyMinMax[1].Max = GUI_TOUCH_AD_BOTTOM;
}

/*********************************************************************
*
*              Calibration
*/


static int Log2Phys(int l, I32 l0, I32 l1, I32 p0, I32 p1) {
  return p0+ ((p1-p0) * (l-l0)) / (l1-l0);
}

int GUI_TOUCH_Calibrate(int Coord, int Log0, int Log1, int Phys0, int Phys1) {
  int l0 = 0;
  int l1 = (Coord==GUI_COORD_X) ? LCD_XSIZE-1 : LCD_YSIZE-1;
  if (labs(Phys0-Phys1) < 20)
    return 1;
  if (labs(Log0-Log1) < 20)
    return 1;
  xyMinMax[Coord].Min = Log2Phys(l0, Log0, Log1, Phys0, Phys1);
  xyMinMax[Coord].Max = Log2Phys(l1, Log0, Log1, Phys0, Phys1);
  return 0;
}


/*********************************************************************
*
*              GUI_TOUCH
*/

#define TP_UP 	0
#define TP_DOWN	1
static int TpStatus=TP_UP;
void __irq Adc_or_TsSep(void);

void __irq Adc_or_TsSep(void)
{	  
#ifndef WIN32
  	static int xPhys, yPhys;
  	int x,y;
  	
     rI_ISPC=BIT_EINT4567;	//clear pending_bit
	 rEXTINTPND=0xf;
	 
	  Uart_Printf("\nAdc_or_TsSep.....\n");
    rUTXH0='+';
    if(TpStatus==TP_UP) {	//笔未压下状态位
        if(!TP_IRQ) {		//得到笔压下中断信号
//        	TpStatus=TP_DOWN;	//设置压下状态
            if (xyMinMax[GUI_COORD_X].Min < xyMinMax[GUI_COORD_X].Max) {
              xMin = xyMinMax[GUI_COORD_X].Min;
              xMax = xyMinMax[GUI_COORD_X].Max;
            } else {
              xMax = xyMinMax[GUI_COORD_X].Min;
              xMin = xyMinMax[GUI_COORD_X].Max;
            }
            if (xyMinMax[GUI_COORD_Y].Min < xyMinMax[GUI_COORD_Y].Max) {
              yMin = xyMinMax[GUI_COORD_Y].Min;
              yMax = xyMinMax[GUI_COORD_Y].Max;
            } else {
              yMax = xyMinMax[GUI_COORD_Y].Min;
              yMin = xyMinMax[GUI_COORD_Y].Max;
            }
          	/* Execute the state machine which reads the touch */
          	TP_GetAdXY(&xPhys,&yPhys);
            /* Convert values into logical values */
            #if !GUI_TOUCH_SWAP_XY   /* Is X/Y swapped ? */
              x = xPhys;
              y = yPhys;
            #else
              x = yPhys;
              y = xPhys;
            #endif
        
            if ((x <xMin) | (x>xMax)  | (y <yMin) | (y>yMax)) {
              GUI_TOUCH_StoreState(-1,-1);
            } else {
              x = AD2X(x);
              y = AD2Y(y);
              GUI_TOUCH_StoreState(x,y);
              Uart_Printf("\nx=%d,y=%d",x,y);
            }
        }
        else {
        	GUI_TOUCH_StoreState(-1,-1);
        }
    }
    
    if(TpStatus==TP_DOWN) {	//笔已压下状态位
        if(TP_IRQ) {		//笔中断信号已经消失
            TpStatus=TP_UP;	//设置笔未压状态位
        }
    }
  #endif /* WIN32 */

}
void TP_init(void)
    {
     
    //TSPX(GPE3) TSMX(GPE4)  TSPY(GPE6) TSMY(GPE7) 
        //  0		1	       1          0
	rPDATE=rPDATE|(0x03<<6);
    rPDATE=rPDATE&(~(0x01<<4))|(0x01<<3);
    Uart_Printf("[Touch Screen Test.]\n");
    Uart_Printf("Separate X/Y position conversion mode test\n");
     
    rEXTINT=0x22222222;
    rINTCON=0x5;
    pISR_EINT4567=(int)Adc_or_TsSep;
    
    rCLKCON=0x7ff8;
    rADCPSR=0x4;
    Uart_Printf("\nStylus Down, please......1 \n");
    rINTMSK=~(BIT_GLOBAL|BIT_EINT4567);
    Uart_Printf("\nStylus Down, please...... 2\n");
  }
  
#else

void GUI_TOUCH_DriverAnalog_C(void) {}

#endif    /* defined(GUI_SUPPORT_TOUCH) && GUI_SUPPORT_TOUCH */