prnetdb.h

gaca源码

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* 
 * The contents of this file are subject to the Mozilla Public
 * License Version 1.1 (the "License"); you may not use this file
 * except in compliance with the License. You may obtain a copy of
 * the License at http://www.mozilla.org/MPL/
 * 
 * Software distributed under the License is distributed on an "AS
 * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
 * implied. See the License for the specific language governing
 * rights and limitations under the License.
 * 
 * The Original Code is the Netscape Portable Runtime (NSPR).
 * 
 * The Initial Developer of the Original Code is Netscape
 * Communications Corporation.  Portions created by Netscape are 
 * Copyright (C) 1998-2000 Netscape Communications Corporation.  All
 * Rights Reserved.
 * 
 * Contributor(s):
 * 
 * Alternatively, the contents of this file may be used under the
 * terms of the GNU General Public License Version 2 or later (the
 * "GPL"), in which case the provisions of the GPL are applicable 
 * instead of those above.  If you wish to allow use of your 
 * version of this file only under the terms of the GPL and not to
 * allow others to use your version of this file under the MPL,
 * indicate your decision by deleting the provisions above and
 * replace them with the notice and other provisions required by
 * the GPL.  If you do not delete the provisions above, a recipient
 * may use your version of this file under either the MPL or the
 * GPL.
 */

#ifndef prnetdb_h___
#define prnetdb_h___

#include "prtypes.h"
#include "prio.h"

PR_BEGIN_EXTERN_C


/*
 *********************************************************************
 *  Translate an Internet address to/from a character string
 *********************************************************************
 */
NSPR_API(PRStatus) PR_StringToNetAddr(
    const char *string, PRNetAddr *addr);

NSPR_API(PRStatus) PR_NetAddrToString(
    const PRNetAddr *addr, char *string, PRUint32 size);

/*
** Structures returned by network data base library.  All addresses are
** supplied in host order, and returned in network order (suitable for
** use in system calls).
*/
/*
** Beware that WINSOCK.H defines h_addrtype and h_length as short.
** Client code does direct struct copies of hostent to PRHostEnt and
** hence the ifdef.
*/
typedef struct PRHostEnt {
    char *h_name;       /* official name of host */
    char **h_aliases;   /* alias list */
#if defined(WIN32) || defined(WIN16)
    PRInt16 h_addrtype; /* host address type */
    PRInt16 h_length;   /* length of address */
#else
    PRInt32 h_addrtype; /* host address type */
    PRInt32 h_length;   /* length of address */
#endif
    char **h_addr_list; /* list of addresses from name server */
} PRHostEnt;

/* A safe size to use that will mostly work... */
#if (defined(AIX) && defined(_THREAD_SAFE)) || defined(OSF1)
#define PR_NETDB_BUF_SIZE sizeof(struct protoent_data)
#else
#define PR_NETDB_BUF_SIZE 1024
#endif

/***********************************************************************
** FUNCTION:	
** DESCRIPTION:	PR_GetHostByName()
** Lookup a host by name.
**
** INPUTS:
**  char *hostname      Character string defining the host name of interest
**  char *buf           A scratch buffer for the runtime to return result.
**                      This buffer is allocated by the caller.
**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
**                      use is PR_NETDB_BUF_SIZE.
** OUTPUTS:
**  PRHostEnt *hostentry
**                      This structure is filled in by the runtime if
**                      the function returns PR_SUCCESS. This structure
**                      is allocated by the caller.
** RETURN:
**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
**                      the result will be PR_FAILURE and the reason
**                      for the failure can be retrieved by PR_GetError().
***********************************************************************/
NSPR_API(PRStatus) PR_GetHostByName(
    const char *hostname, char *buf, PRIntn bufsize, PRHostEnt *hostentry);

/***********************************************************************
** FUNCTION:	
** DESCRIPTION:	PR_GetIPNodeByName()
** Lookup a host by name. Equivalent to getipnodebyname(AI_DEFAULT)
** of RFC 2553.
**
** INPUTS:
**  char *hostname      Character string defining the host name of interest
**  PRUint16 af         Address family (either PR_AF_INET or PR_AF_INET6)
**  PRIntn flags        Specifies the types of addresses that are searched
**                      for and the types of addresses that are returned.
**                      The only supported flag is PR_AI_DEFAULT.
**  char *buf           A scratch buffer for the runtime to return result.
**                      This buffer is allocated by the caller.
**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
**                      use is PR_NETDB_BUF_SIZE.
** OUTPUTS:
**  PRHostEnt *hostentry
**                      This structure is filled in by the runtime if
**                      the function returns PR_SUCCESS. This structure
**                      is allocated by the caller.
** RETURN:
**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
**                      the result will be PR_FAILURE and the reason
**                      for the failure can be retrieved by PR_GetError().
***********************************************************************/


#define PR_AI_ALL        0x08
#define PR_AI_V4MAPPED   0x10
#define PR_AI_ADDRCONFIG 0x20
#define PR_AI_DEFAULT    (PR_AI_V4MAPPED | PR_AI_ADDRCONFIG)

NSPR_API(PRStatus) PR_GetIPNodeByName(
    const char *hostname,
    PRUint16 af,
    PRIntn flags,
    char *buf,
    PRIntn bufsize,
    PRHostEnt *hostentry);

/***********************************************************************
** FUNCTION:	
** DESCRIPTION:	PR_GetHostByAddr()
** Lookup a host entry by its network address.
**
** INPUTS:
**  char *hostaddr      IP address of host in question
**  char *buf           A scratch buffer for the runtime to return result.
**                      This buffer is allocated by the caller.
**  PRIntn bufsize      Number of bytes in 'buf'. A recommnded value to
**                      use is PR_NETDB_BUF_SIZE.
** OUTPUTS:
**  PRHostEnt *hostentry
**                      This structure is filled in by the runtime if
**                      the function returns PR_SUCCESS. This structure
**                      is allocated by the caller.
** RETURN:
**  PRStatus            PR_SUCCESS if the lookup succeeds. If it fails
**                      the result will be PR_FAILURE and the reason
**                      for the failure can be retrieved by PR_GetError().
***********************************************************************/
NSPR_API(PRStatus) PR_GetHostByAddr(
    const PRNetAddr *hostaddr, char *buf, PRIntn bufsize, PRHostEnt *hostentry);

/***********************************************************************
** FUNCTION:	PR_EnumerateHostEnt()	
** DESCRIPTION:
**  A stateless enumerator over a PRHostEnt structure acquired from
**  PR_GetHostByName() PR_GetHostByAddr() to evaluate the possible
**  network addresses.
**
** INPUTS:
**  PRIntn  enumIndex   Index of the enumeration. The enumeration starts
**                      and ends with a value of zero.
**
**  PRHostEnt *hostEnt  A pointer to a host entry struct that was
**                      previously returned by PR_GetHostByName() or
**                      PR_GetHostByAddr().
**
**  PRUint16 port       The port number to be assigned as part of the
**                      PRNetAddr.
**
** OUTPUTS:
**  PRNetAddr *address  A pointer to an address structure that will be
**                      filled in by the call to the enumeration if the
**                      result of the call is greater than zero.
**
** RETURN:
**  PRIntn              The value that should be used for the next call
**                      of the enumerator ('enumIndex'). The enumeration
**                      is ended if this value is returned zero.
**                      If a value of -1 is returned, the enumeration
**                      has failed. The reason for the failure can be
**                      retrieved by calling PR_GetError().
***********************************************************************/
NSPR_API(PRIntn) PR_EnumerateHostEnt(
    PRIntn enumIndex, const PRHostEnt *hostEnt, PRUint16 port, PRNetAddr *address);

/***********************************************************************
** FUNCTION: PR_InitializeNetAddr(), 
** DESCRIPTION:
**  Initialize the fields of a PRNetAddr, assigning well known values as
**  appropriate.
**
** INPUTS
**  PRNetAddrValue val  The value to be assigned to the IP Address portion
**                      of the network address. This can only specify the
**                      special well known values that are equivalent to
**                      INADDR_ANY and INADDR_LOOPBACK.
**
**  PRUint16 port       The port number to be assigned in the structure.
**
** OUTPUTS:
**  PRNetAddr *addr     The address to be manipulated.
**
** RETURN:
**  PRStatus            To indicate success or failure. If the latter, the
**                      reason for the failure can be retrieved by calling
**                      PR_GetError();
***********************************************************************/
typedef enum PRNetAddrValue
{
    PR_IpAddrNull,      /* do NOT overwrite the IP address */
    PR_IpAddrAny,       /* assign logical INADDR_ANY to IP address */
    PR_IpAddrLoopback,  /* assign logical INADDR_LOOPBACK  */
    PR_IpAddrV4Mapped   /* IPv4 mapped address */
} PRNetAddrValue;

NSPR_API(PRStatus) PR_InitializeNetAddr(
    PRNetAddrValue val, PRUint16 port, PRNetAddr *addr);

/***********************************************************************
** FUNCTION: PR_SetNetAddr(), 
** DESCRIPTION:
**  Set the fields of a PRNetAddr, assigning well known values as
**  appropriate. This function is similar to PR_InitializeNetAddr
**  but differs in that the address family is specified.
**